Unspecified vulnerability in HP KeyView before 10.23.0.1 and 10.24.x before 10.24.0.1 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2875.

HP Matrix Operating Environment before 7.5.0 allows remote attackers to obtain sensitive information or modify data via unspecified vectors, a different vulnerability than CVE-2015-5427 and CVE-2015-5429.

HP Systems Insight Manager (SIM) before 7.5.0, as used in HP Matrix Operating Environment before 7.5.0 and other products, allows remote attackers to obtain sensitive information or modify data via unspecified vectors.

Partition Manager (parmgr) in HP-UX B.11.23 does not properly validate certificates that are provided by the cimserver, which allows attackers to obtain sensitive data or gain privileges.

Unspecified vulnerability in HP KeyView before 10.23.0.1 and 10.24.x before 10.24.0.1 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2885.

A remote server-side request forgery (ssrf) vulnerability was discovered in HPE OneView version(s): Prior to 7.0. HPE has provided a software update to resolve this vulnerability in HPE OneView.

The sanitize_cookie_path function in cURL and libcurl 7.31.0 through 7.41.0 does not properly calculate an index, which allows remote attackers to cause a denial of service (out-of-bounds write and crash) or possibly have other unspecified impact via a cookie path containing only a double-quote character.

A security vulnerability in the HPE Virtual Connect SE 16Gb Fibre Channel Module for HPE Synergy running firmware 5.00.50, which is part of the HPE Synergy Custom SPP 2018.11.20190205, could allow local or remote unauthorized elevation of privilege.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (iMC) PLAT 7.3 E0506P07. The vulnerability was resolved in iMC PLAT 7.3 E0605P04 or subsequent version.

A security vulnerability was identified in 3PAR Service Processor (SP) prior to SP-4.4.0.GA-110(MU7). The vulnerability may be exploited remotely to allow access restriction bypass.

A remote bypass security restrictions vulnerability was discovered in HPE OneView version(s): Prior to 7.0. HPE has provided a software update to resolve this vulnerability in HPE OneView.

Unspecified vulnerability in HP Sprinter 12.01 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2336.

Unspecified vulnerability in HP Universal CMDB 10.01 and 10.10 allows remote attackers to execute arbitrary code or obtain sensitive information via unknown vectors, aka ZDI-CAN-2083.

Unspecified vulnerability in HP Sprinter 12.01 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2343.

Unspecified vulnerability in HP Sprinter 12.01 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2342.

Unspecified vulnerability in HP Universal CMDB 10.01 and 10.10 allows remote attackers to execute arbitrary code or obtain sensitive information via unknown vectors, aka ZDI-CAN-2091.

Unspecified vulnerability in HP SiteScope 11.1x through 11.13 and 11.2x through 11.24 allows remote attackers to bypass authentication via unknown vectors, aka ZDI-CAN-2140.

Unspecified vulnerability in HP Sprinter 12.01 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2344.

Unspecified vulnerability in HP Operations Manager 9.20 on UNIX allows remote attackers to execute arbitrary code via unknown vectors.

Unspecified vulnerability in HP LoadRunner before 11.52 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-1670.

Unspecified vulnerability in HP Unified Functional Testing before 12.0 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-1932.

A remote sql injection vulnerability in HPE Network Automation version 9.1x, 9.2x, 10.0x, 10.1x and 10.2x were found.

Multiple unspecified vulnerabilities in HP Select Identity 4.00, 4.01, 4.11, 4.12, 4.13, and 4.20 allow remote authenticated users to gain access via unknown vectors.

Unspecified vulnerability in a certain ActiveX control for HP Virtual Rooms (HPVR) 6 and earlier allows remote attackers to execute arbitrary code via unknown vectors.

Security vulnerabilities in the HPE Integrated Lights-Out 2 (iLO 2) firmware could be exploited remotely to allow authentication bypass, code execution, and denial of service.

IBM Curam Social Program Management 8.0.0 and 8.0.1 does not invalidate session after logout which could allow an authenticated user to impersonate another user on the system. IBM X-Force ID: 218281.

Buffer overflow in the RegistryString function in the HPISDataManagerLib.Datamgr ActiveX control in HPISDataManager.dll in HP Instant Support before 1.0.0.24 allows remote attackers to execute arbitrary code via a long first argument, a different vulnerability than CVE-2007-5604, CVE-2007-5605, and CVE-2007-5606.

In Eclipse Jetty, versions 9.2.x and older, 9.3.x (all configurations), and 9.4.x (non-default configuration with RFC2616 compliance enabled), transfer-encoding chunks are handled poorly. The chunk length parsing was vulnerable to an integer overflow. Thus a large chunk size could be interpreted as a smaller chunk size and content sent as chunk body could be interpreted as a pipelined request. If Jetty was deployed behind an intermediary that imposed some authorization and that intermediary allowed arbitrarily large chunks to be passed on unchanged, then this flaw could be used to bypass the authorization imposed by the intermediary as the fake pipelined request would not be interpreted by the intermediary as a request.

A potential security vulnerability has been identified in HPE Systems Insight Manager (SIM) version 7.6. The vulnerability could be exploited to allow remote code execution.

Ezboo webstats, possibly 3.0.3, allows remote attackers to bypass authentication and gain access via a direct request to (1) update.php and (2) config.php.

Unspecified vulnerability in HP Intelligent Management Center (iMC) User Access Manager (UAM) before 5.2 E0402 allows remote attackers to obtain sensitive information, modify data, or cause a denial of service via unknown vectors, aka ZDI-CAN-1643.

HP nagios plugin for iLO (nagios-plugins-hpilo v1.50 and earlier) has a php code injection vulnerability.

Unspecified vulnerability in HP Intelligent Management Center (iMC) and Intelligent Management Center for Automated Network Manager (ANM) before 5.2 E0401 allows remote attackers to obtain sensitive information, modify data, or cause a denial of service via unknown vectors, aka ZDI-CAN-1615.

Unspecified vulnerability in HP Intelligent Management Center (iMC) and Intelligent Management Center for Automated Network Manager (ANM) before 5.2 E0401 allows remote attackers to obtain sensitive information, modify data, or cause a denial of service via unknown vectors, aka ZDI-CAN-1612.

Unspecified vulnerability in HP Performance Insight 5.31, 5.40, and 5.41, when Sybase is used, allows remote attackers to obtain sensitive information, modify data, or cause a denial of service via unknown vectors, a different vulnerability than CVE-2012-3270.

Unspecified vulnerability in a SOAP feature in HP SiteScope 11.10 through 11.12 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-1472.

Multiple unspecified vulnerabilities in HP System Health Application and Command Line Utilities before 9.0.0 allow remote attackers to execute arbitrary code via unknown vectors.

SQL injection vulnerability in HP Performance Insight for Networks 5.3.x, 5.41, 5.41.001, and 5.41.002 allows remote attackers to execute arbitrary SQL commands via unspecified vectors.

Unspecified vulnerability in HP Systems Insight Manager (SIM) before 7.0 allows remote attackers to obtain sensitive information, modify data, or cause a denial of service via unknown vectors, a different vulnerability than CVE-2012-1998.

The (1) AddUser, (2) AddUserEx, (3) RemoveUser, (4) RemoveUserByGuide, (5) RemoveUserEx, and (6) RemoveUserRegardless methods in HP Protect Tools Device Access Manager (PTDAM) before 6.1.0.1 allow remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a long SidString argument.

Directory traversal vulnerability in the MPAUploader.Uploader.1.UploadFiles method in HP Managed Printing Administration before 2.6.4 allows remote attackers to create arbitrary files via crafted form data.

Directory traversal vulnerability in hpmpa/jobDelivery/Default.asp in HP Managed Printing Administration before 2.6.4 allows remote attackers to create arbitrary files via crafted form data.

Unspecified vulnerability in HP Managed Printing Administration before 2.6.4 allows remote attackers to obtain sensitive information, modify data, or cause a denial of service via unknown vectors.

The vertica-udx-zygote process in HP Vertica 7.1.1 UDx does not require authentication, which allows remote attackers to execute arbitrary commands via a crafted packet, aka ZDI-CAN-2914.

Unspecified vulnerability in HP KeyView before 10.23.0.1 and 10.24.x before 10.24.0.1 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2884.

HP Matrix Operating Environment before 7.5.0 allows remote attackers to obtain sensitive information or modify data via unspecified vectors, a different vulnerability than CVE-2015-5428 and CVE-2015-5429.

Unspecified vulnerability in HP KeyView before 10.23.0.1 and 10.24.x before 10.24.0.1 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-2883.

HP Virtual Connect Enterprise Manager (VCEM) SDK before 7.5.0, as used in HP Matrix Operating Environment before 7.5.0 and other products, allows remote attackers to obtain sensitive information or modify data via unspecified vectors.

Unspecified vulnerability in HP Operations Orchestration 10.x allows remote attackers to bypass authentication, and obtain sensitive information or modify data, via unknown vectors.

HP TippingPoint Security Management System (SMS) and TippingPoint Virtual Security Management System (vSMS) before 4.1 patch 3 and 4.2 before patch 1 do not require authentication for JBoss RMI requests, which allows remote attackers to execute arbitrary code by (1) uploading this code within an archive or (2) instantiating a class.