A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

HNAP1/control/SetMasterWLanSettings.php in D-Link D-Link Router DIR-846 DIR-846 A1_100.26 allows remote attackers to execute arbitrary commands via shell metacharacters in the ssid0 or ssid1 parameter.

D-link DI-8100 16.07.26A1 is vulnerable to Command Injection. An attacker can exploit this vulnerability by crafting specific HTTP requests, triggering the command execution flaw and gaining the highest privilege shell access to the firmware system.

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

A vulnerability classified as critical has been found in D-Link DIR-890L and DIR-806A1 up to 100CNb11/108B03. Affected is the function sub_175C8 of the file /htdocs/soap.cgi. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been classified as critical. This affects the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DAR-7000 up to 20151231. This issue affects some unknown processing of the file /log/webmailattach.php. The manipulation of the argument table_name leads to an unknown weakness. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-240239. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been declared as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DIR-880L up to 104WWb01. Affected by this vulnerability is the function sub_16570 of the file /htdocs/ssdpcgi of the component Request Header Handler. The manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. The administrative password is stored in plaintext in the /tmp/csman/0 file. An attacker having a directory traversal (or LFI) can easily get full router access.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.

A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

A command injection vulnerability in the component /setnetworksettings/SubnetMask of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary code as root via HNAP1/control/SetGuestWLanSettings.php.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

The D-Link DIR-615 device before v20.12PTb04 doesn't use SSL for any of the authenticated pages. Also, it doesn't allow the user to generate his own SSL Certificate. An attacker can simply monitor network traffic to steal a user's credentials and/or credentials of users being added while sniffing the traffic.

D-Link DWL-900AP+ Access Point 2.1 and 2.2 allows remote attackers to access the TFTP server without authentication and read the config.img file, which contains sensitive information such as the administrative password, the WEP encryption keys, and network configuration information.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the FILECODE parameter on login.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr parameter to ping.ccp.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the curTime parameter on login.

D-Link DIR-815 REV. B (with firmware through DIR-815_REVB_FIRMWARE_PATCH_2.07.B01) devices have permission bypass and information disclosure in /htdocs/web/getcfg.php, as demonstrated by a /getcfg.php?a=%0a_POST_SERVICES%3DDEVICE.ACCOUNT%0aAUTHORIZED_GROUP%3D1 request.

The remote administration UI in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to bypass intended access restrictions via unspecified vectors.

The D-Link DSR-250 (3.14) DSR-1000N (2.11B201) UPnP service contains a command injection vulnerability, which can cause remote command execution.

Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values.

The miniigd SOAP service in Realtek SDK allows remote attackers to execute arbitrary code via a crafted NewInternalClient request, as exploited in the wild through 2023.

Buffer Overflow vulnerability in D-Link device DI-7003GV2.D1 v.23.08.25D1 and before, DI-7100G+V2.D1 v.23.08.23D1 and before, DI-7100GV2.D1 v.23.08.23D1, DI-7200G+V2.D1 v.23.08.23D1 and before, DI-7200GV2.E1 v.23.08.23E1 and before, DI-7300G+V2.D1 v.23.08.23D1, and DI-7400G+V2.D1 v.23.08.23D1 and before allows a remote attacker to execute arbitrary code via the fn parameter of the file.data function.

Buffer Overflow vulnerability in D-Link device DI-7003GV2.D1 v.23.08.25D1 and before, DI-7100G+V2.D1 v.23.08.23D1 and before, DI-7100GV2.D1 v.23.08.23D1, DI-7200G+V2.D1 v.23.08.23D1 and before, DI-7200GV2.E1 v.23.08.23E1 and before, DI-7300G+V2.D1 v.23.08.23D1, and DI-7400G+V2.D1 v.23.08.23D1 and before allows a remote attacker to execute arbitrary code via the ip/type parameter of the jingx.asp function.

Stack-based buffer overflow in the Universal Plug and Play (UPnP) service in D-Link DI-524, DI-604 Broadband Router, DI-624, D-Link DI-784, WBR-1310 Wireless G Router, WBR-2310 RangeBooster G Router, and EBR-2310 Ethernet Broadband Router allows remote attackers to execute arbitrary code via a long M-SEARCH request to UDP port 1900.

Buffer Overflow vulnerability in D-Link device DI-7003GV2.D1 v.23.08.25D1 and before, DI-7100G+V2.D1 v.23.08.23D1 and before, DI-7100GV2.D1 v.23.08.23D1, DI-7200G+V2.D1 v.23.08.23D1 and before, DI-7200GV2.E1 v.23.08.23E1 and before, DI-7300G+V2.D1 v.23.08.23D1, and DI-7400G+V2.D1 v.23.08.23D1 and before allows a remote attacker to execute arbitrary code via the wild/mx and other parameters of the ddns.asp function

D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Command Bypass attacks via unspecified vectors.

Multiple SQL injection vulnerabilities in the administration login page in D-Link DAP-1350 (Rev. A1) with firmware 1.14 and earlier allow remote attackers to execute arbitrary SQL commands via the (1) username or (2) password.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

D-Link DIR-816 A2 1.10 B05 allows unauthenticated attackers to arbitrarily reset the device via a crafted tokenid parameter to /goform/form2Reboot.cgi.

D-Link DIR-820L 1.05B03 has a stack overflow vulnerability in the cancelPing function.

D-Link device DIR-820L 1.05B03 is vulnerable to Insecure Permissions.

D-Link Online behavior audit gateway DAR-7000 V31R02B1413C is vulnerable to SQL Injection via /log/mailrecvview.php.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the popupId parameter in the H5/hi_block.asp function.

D-Link DIR-823G v1.0.2B05 was discovered to contain a stack overflow via parameter TXPower and GuardInt in SetWLanRadioSecurity.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function web_cert_download_handler. This vulnerability allows attackers to execute arbitrary commands via the certDownload parameter.

D-Link DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the zn_jb parameter in the arp_sys.asp function.