A vulnerability in the Snort detection engine integration for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause unlimited memory consumption, which could lead to a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient memory management for certain Snort events. An attacker could exploit this vulnerability by sending a series of crafted IP packets that would generate specific Snort events on an affected device. A sustained attack could cause an out of memory condition on the affected device. A successful exploit could allow the attacker to interrupt all traffic flowing through the affected device. In some circumstances, the attacker may be able to cause the device to reload, resulting in a DoS condition.

A vulnerability in the rate limiter for Bidirectional Forwarding Detection (BFD) traffic of Cisco NX-OS Software for Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause BFD traffic to be dropped on an affected device. This vulnerability is due to a logic error in the BFD rate limiter functionality. An attacker could exploit this vulnerability by sending a crafted stream of traffic through the device. A successful exploit could allow the attacker to cause BFD traffic to be dropped, resulting in BFD session flaps. BFD session flaps can cause route instability and dropped traffic, resulting in a denial of service (DoS) condition. This vulnerability applies to both IPv4 and IPv6 traffic.

A vulnerability in the TCP syslog module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust the 1550-byte buffers on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing boundary check in an internal function. An attacker could exploit this vulnerability by establishing a man-in-the-middle position between an affected device and its configured TCP syslog server and then maliciously modifying the TCP header in segments that are sent from the syslog server to the affected device. A successful exploit could allow the attacker to exhaust buffer on the affected device and cause all TCP-based features to stop functioning, resulting in a DoS condition. The affected TCP-based features include AnyConnect SSL VPN, clientless SSL VPN, and management connections such as Secure Shell (SSH), Telnet, and HTTPS.

A vulnerability in the implementation of the Resource Public Key Infrastructure (RPKI) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the Border Gateway Protocol (BGP) process to crash, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of a specific RPKI to Router (RTR) Protocol packet header. An attacker could exploit this vulnerability by compromising the RPKI validator server and sending a specifically crafted RTR packet to an affected device. Alternatively, the attacker could use man-in-the-middle techniques to impersonate the RPKI validator server and send a crafted RTR response packet over the established RTR TCP connection to the affected device. A successful exploit could allow the attacker to cause a DoS condition because the BGP process could constantly restart and BGP routing could become unstable.

Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device crash) via (1) "abnormal" MGCP messages, aka CSCsd81407; and (2) a large facsimile packet, aka CSCej20505.

Multiple vulnerabilities in the Login Enhancements (Login Block) feature of Cisco IOS Software could allow an unauthenticated, remote attacker to trigger a reload of an affected system, resulting in a denial of service (DoS) condition. These vulnerabilities affect Cisco devices that are running Cisco IOS Software Release 15.4(2)T, 15.4(3)M, or 15.4(2)CG and later. Cisco Bug IDs: CSCuy32360, CSCuz60599.

A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of SIP packets in transit while NAT is performed on an affected device. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted SIP packets via UDP port 5060 through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

Multiple vulnerabilities in the Login Enhancements (Login Block) feature of Cisco IOS Software could allow an unauthenticated, remote attacker to trigger a reload of an affected system, resulting in a denial of service (DoS) condition. These vulnerabilities affect Cisco devices that are running Cisco IOS Software Release 15.4(2)T, 15.4(3)M, or 15.4(2)CG and later. Cisco Bug IDs: CSCuy32360, CSCuz60599.

A vulnerability in the TCP socket code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a state condition between the socket state and the transmission control block (TCB) state. While this vulnerability potentially affects all TCP applications, the only affected application observed so far is the HTTP server. An attacker could exploit this vulnerability by sending specific HTTP requests at a sustained rate to a reachable IP address of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition on an affected device.

A vulnerability in the web user interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a double-free-in-memory handling by the affected software when specific HTTP requests are processed. An attacker could exploit this vulnerability by sending specific HTTP requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition on an affected device. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network.

A vulnerability in Cisco AMP for Endpoints Mac Connector Software installed on Apple macOS 10.12 could allow an unauthenticated, remote attacker to cause a kernel panic on an affected system, resulting in a denial of service (DoS) condition. The vulnerability exists if the affected software is running in Block network conviction mode. Exploitation could occur if the system that is running the affected software starts a server process and an address in the IP blacklist cache of the affected software attempts to connect to the affected system. A successful exploit could allow the attacker to cause a kernel panic on the system that is running the affected software, resulting in a DoS condition. Cisco Bug IDs: CSCvk08192.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Multiple Cisco products are affected by a vulnerability in Snort rules that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.The vulnerability is due to improper handling of the Block with Reset or Interactive Block with Reset actions if a rule is configured without proper constraints. An attacker could exploit this vulnerability by sending a crafted IP packet to the affected device. A successful exploit could allow the attacker to cause through traffic to be dropped. Note: Only products with Snort3 configured and either a rule with Block with Reset or Interactive Block with Reset actions configured are vulnerable. Products configured with Snort2 are not vulnerable.

A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.

A vulnerability in the detection engine reassembly of Secure Sockets Layer (SSL) packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the Snort process consumes a high level of CPU resources. Affected Products: This vulnerability affects Cisco Firepower System Software running software releases 6.0.0, 6.1.0, 6.2.0, or 6.2.1 when the device is configured with an SSL policy that has at least one rule specifying traffic decryption. More Information: CSCvc58563. Known Affected Releases: 6.0.0 6.1.0 6.2.0 6.2.1.

A vulnerability in the implementation of Common Industrial Protocol (CIP) functionality in Cisco Industrial Ethernet 2000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to a system memory leak. More Information: CSCvc54788. Known Affected Releases: 15.2(5.4.32i)E2. Known Fixed Releases: 15.2(5.4.62i)E2.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

The SIP process in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 7.x before 7.1(5b)su4 and 8.x before 8.0(1) does not properly handle SDP data within a SIP call in certain situations related to use of the g729ar8 codec for a Media Termination Point (MTP), which allows remote attackers to cause a denial of service (service outage) via a crafted call, aka Bug ID CSCtc61990.

Race condition in the HTTP Deep Packet Inspection (DPI) feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(5.5), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.4), 9.0.x before 9.0(1.4), and 9.1.x before 9.1(1.2), in certain conditions involving the spoof-server option or ActiveX or Java response inspection, allows remote attackers to cause a denial of service (device reload) via a crafted HTTP response, aka Bug ID CSCud37992.

Cisco IOS XR 3.8.1 through 4.2.0 does not properly process fragmented packets within the RP-A, RP-B, PRP, and DRP-B route-processor components, which allows remote attackers to cause a denial of service (transmission outage) via (1) IPv4 or (2) IPv6 traffic, aka Bug ID CSCuh30380.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the DNS application layer gateway (ALG) functionality used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a logic error that occurs when an affected device inspects certain DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through an affected device that is performing NAT for DNS packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability can be exploited only by traffic that is sent through an affected device via IPv4 packets. The vulnerability cannot be exploited via IPv6 traffic.

A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this specific, valid BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause one of the BGP-related routing applications to restart multiple times, leading to a system-level restart. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 1.6.x; Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x; Cisco TelePresence endpoint devices with software 1.2.x through 1.6.x; and Cisco TelePresence Manager 1.2.x, 1.3.x, 1.4.x, 1.5.x, and 1.6.2 allows remote attackers to execute arbitrary code via a crafted Cisco Discovery Protocol packet, aka Bug IDs CSCtd75769, CSCtd75766, CSCtd75754, and CSCtd75761.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3043, and CVE-2010-3044.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (pbuf exhaustion and device crash) via fragmented traffic, aka Bug ID CSCtd26794.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3042, and CVE-2010-3044.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Multiple stack-based buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to use of a function pointer in a callback mechanism.

Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to atas32.dll, a different vulnerability than CVE-2010-3041, CVE-2010-3042, and CVE-2010-3043.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (buffer leak and device crash) via ARP requests that trigger an ARP storm, aka Bug ID CSCte43508.

Stack-based buffer overflow in Cisco WebEx Meeting Center T27LB before SP21 EP3 and T27LC before SP22 allows user-assisted remote authenticated users to execute arbitrary code by providing a crafted .atp file and then disconnecting from a meeting. NOTE: since this is a site-specific issue with no expected action for consumers, it might be REJECTed.

Multiple stack-based buffer overflows in agent.exe in Setup Manager in Cisco Intelligent Contact Manager (ICM) before 7.0 allow remote attackers to execute arbitrary code via a long parameter in a (1) HandleUpgradeAll, (2) AgentUpgrade, (3) HandleQueryNodeInfoReq, or (4) HandleUpgradeTrace TCP packet, aka Bug IDs CSCti45698, CSCti45715, CSCti45726, and CSCti46164.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to have an unspecified impact via long IKE attributes, aka Bug ID CSCsu43121.

Buffer overflow in Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 and earlier on Windows, as distributed in CiscoWorks LAN Management Solution (LMS), allows remote attackers to execute arbitrary code via a malformed getProcessName CORBA General Inter-ORB Protocol (GIOP) request, related to a "third-party component," aka Bug ID CSCsv62350.

Heap-based buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 (aka T26SP49EP32) for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file, a different vulnerability than CVE-2009-2876 and CVE-2009-2879.

Buffer overflow in atrpui.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 for Windows, 27.x before 27.10.x for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted WebEx Recording Format (WRF) file.

Stack-based buffer overflow in ataudio.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file.

Heap-based buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 (aka T26SP49EP32) for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file, a different vulnerability than CVE-2009-2878 and CVE-2009-2879.

Buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 for Windows, 27.x before 27.10.x for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted WebEx Recording Format (WRF) file.

Heap-based buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 (aka T26SP49EP32) for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file, a different vulnerability than CVE-2009-2876 and CVE-2009-2878.

Buffer overflow in the login implementation in the Extension Mobility feature in the Unified Communications Manager Express (CME) component in Cisco IOS 12.4XW, 12.4XY, 12.4XZ, and 12.4YA allows remote attackers to execute arbitrary code or cause a denial of service via crafted HTTP requests, aka Bug ID CSCsq58779.