A Remote Code Execution vulnerability exists in the SAP NetWeaver (ABAP Server, up to release 7.40) and ABAP Platform (> release 7.40).Because of this, an attacker can exploit these products via Code Injection, and potentially enabling to take complete control of the products, including viewing, changing, or deleting data by injecting code into the working memory which is subsequently executed by the application. It can also be used to cause a general fault in the product, causing the products to terminate.

Service Data Download in SAP Application Server ABAP (ST-PI, before versions 2008_1_46C, 2008_1_620, 2008_1_640, 2008_1_700, 2008_1_710, 740) allows an attacker to inject code that can be executed by the application. An attacker could thereby control the behavior of the application and the whole ABAP system leading to Code Injection.

SAP Adaptive Server Enterprise (Backup Server), version 16.0, does not perform the necessary validation checks for an authenticated user while executing DUMP or LOAD command allowing arbitrary code execution or Code Injection.

Under certain conditions, SAP Adaptive Server Enterprise (XP Server on Windows Platform), versions 15.7, 16.0, does not perform the necessary checks for an authenticated user while executing the extended stored procedure, allowing an attacker to read, modify, delete restricted data on connected servers, leading to Code Injection.

A vulnerability was found in docarray up to 0.40.1. It has been rated as critical. Affected by this issue is the function __getitem__ of the file /docarray/data/torch_dataset.py of the component Web API. The manipulation leads to improperly controlled modification of object prototype attributes ('prototype pollution'). The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in weibocom rill-flow 0.1.18. It has been classified as critical. Affected is an unknown function of the component Management Console. The manipulation leads to code injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Sruu.pl in Batflat 1.3.6 allows an authenticated user to perform code injection (and consequently Remote Code Execution) via the input fields of the Users tab. To exploit this, one must login to the administration panel and edit an arbitrary user's data (username, displayed name, etc.). NOTE: This vulnerability only affects products that are no longer supported by the maintainer

OpenSolution Quick.CMS < 6.7 and Quick.Cart < 6.7 allow an authenticated user to perform code injection (and consequently Remote Code Execution) via the input fields of the Language tab.

A vulnerability was found in Seeyon Zhiyuan OA Web Application System 8.1 SP2. It has been rated as critical. Affected by this issue is the function postData of the file ROOT\WEB-INF\classes\com\ours\www\ehr\salary\service\data\EhrSalaryPayrollServiceImpl.class of the component Beetl Template Handler. The manipulation of the argument payrollId leads to code injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Improper Input Validation in Nagios Fusion 4.1.8 and earlier allows an authenticated attacker to execute remote code via table pagination.

A vulnerability was found in web-arena-x webarena up to 0.2.0. It has been declared as critical. This vulnerability affects the function HTMLContentEvaluator of the file webarena/evaluation_harness/evaluators.py. The manipulation of the argument target["url"] leads to code injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in panhainan DS-Java 1.0 and classified as critical. This issue affects the function uploadUserPic.action of the file src/com/phn/action/FileUpload.java. The manipulation of the argument fileUpload leads to code injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An authenticated attacker can inject malicious code into "lang" parameter in /uno/central.php file in CMSuno 1.6.2 and run this PHP code in the web page. In this way, attacker can takeover the control of the server.

In CMSuno 1.6.2, an attacker can inject malicious PHP code as a "username" while changing his/her username & password. After that, when attacker logs in to the application, attacker's code will be run. As a result of this vulnerability, authenticated user can run command on the server.

admin/save-settings.php in Chadha PHPKB Standard Multi-Language 9 allows remote attackers to achieve Code Execution by injecting PHP code into any POST parameter when saving global settings.

ThinkCMF 5.0.190111 allows remote attackers to execute arbitrary PHP code via the portal/admin_category/addpost.html alias parameter because the mishandling of a single quote character allows data/conf/route.php injection.

Code injection in SonicWall SMA100 allows an authenticated user to execute arbitrary code in viewcacert CGI script. This vulnerability impacted SMA100 version 9.0.0.4 and earlier.

A security bypass exists in Magento 2.1 prior to 2.1.18, Magento 2.2 prior to 2.2.9, Magento 2.3 prior to 2.3.2 that could be abused to execute arbitrary PHP code. An authenticated user can bypass security protections that prevent arbitrary PHP script upload via form data injection.

PHP remote file inclusion vulnerability in front/popup.php in GLPI 0.78 through 0.80.61 allows remote authenticated users to execute arbitrary PHP code via a URL in the sub_type parameter.

The version V6.01.03.01 of ZTE ZXCDN IAMWEB product is impacted by a code injection vulnerability. An attacker could exploit the vulnerability to inject malicious code into the management page, resulting in users’ information leakage.

A vulnerability, which was classified as critical, was found in spider-flow 0.4.3. Affected is the function FunctionService.saveFunction of the file src/main/java/org/spiderflow/controller/FunctionController.java. The manipulation leads to code injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249510 is the identifier assigned to this vulnerability.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the EmailMan module by an Admin user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the Configurator module by an Admin user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the Campaigns module by an Admin user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the Emails module by a Regular user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the ModuleBuilder module by a Developer user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the ModuleBuilder module by an Admin user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the MergeRecords module by a Developer user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the Tracker module by an Admin user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the Administration module by an Admin user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the MergeRecords module by an Admin user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the MergeRecords module by a Regular user.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP code injection in the Administration module by a Developer user.

rpc.cgi in Webmin through 1.920 allows authenticated Remote Code Execution via a crafted object name because unserialise_variable makes an eval call. NOTE: the Webmin_Servers_Index documentation states "RPC can be used to run any command or modify any file on a server, which is why access to it must not be granted to un-trusted Webmin users."

Code injection vulnerability in Palo Alto Networks Traps 5.0.5 and earlier may allow an authenticated attacker to inject arbitrary JavaScript or HTML.

Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to versions 3.1.45 and 4.1.1, template authors could inject php code by choosing a malicious {block} name or {include} file name. Sites that cannot fully trust template authors should upgrade to versions 3.1.45 or 4.1.1 to receive a patch for this issue. There are currently no known workarounds.

The groundhogg plugin before 1.3.5 for WordPress has wp-admin/admin-ajax.php?action=bulk_action_listener remote code execution.

The profilegrid-user-profiles-groups-and-communities plugin before 2.8.6 for WordPress has remote code execution via an wp-admin/admin-ajax.php request with the action=pm_template_preview&html=<?php substring followed by PHP code.

An issue was discovered in PRiSE adAS 1.7.0. An authenticated user can change the function used to hash passwords to any function, leading to remote code execution.

The file-management system in Movable Type before 4.38, 5.0x before 5.07, and 5.1x before 5.13 allows remote authenticated users to execute arbitrary commands by leveraging the file-upload feature, related to an "OS Command Injection" issue.

The (1) Traceroute and (2) Ping implementations in tools.php in SpamTitan WebTitan before 3.60 allow remote authenticated users to execute arbitrary commands via shell metacharacters in an argument, as demonstrated by an && (ampersand ampersand) sequence.

A vulnerability was found in Intelbras InControl up to 2.21.57. It has been rated as critical. Affected by this issue is some unknown functionality of the file /v1/operador/ of the component Relatório de Operadores Page. The manipulation of the argument fields leads to code injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.21.58 is able to address this issue. It is recommended to upgrade the affected component. The vendor was informed early on 2024-07-19 about this issue. The release of a fixed version 2.21.58 was announced for the end of August 2024 but then was postponed until 2024-09-20.

A vulnerability was found in jeanmarc77 123solar 1.8.4.5. It has been rated as critical. Affected by this issue is some unknown functionality of the file config/config_invt1.php. The manipulation of the argument PASSOx leads to code injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The patch is identified as f4a8c748ec436e5a79f91ccb6a6f73752b336aa5. It is recommended to apply a patch to fix this issue.

wap/index.php in Crossday Discuz! Board 6.x and 7.x allows remote authenticated users to execute arbitrary PHP code via the creditsformula parameter.

Static code injection vulnerability in admin.php in Ryneezy phoSheezy 0.2 allows remote authenticated administrators to inject arbitrary PHP code into config/header via the header parameter. NOTE: this can be exploited by unauthenticated attackers by leveraging CVE-2009-0250. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

Static code injection vulnerability in admin.php in Ryneezy phoSheezy 0.2 allows remote authenticated administrators to inject arbitrary PHP code into config/footer via the footer parameter. NOTE: this can be exploited by unauthenticated attackers by leveraging CVE-2009-0250. NOTE: some of these details are obtained from third party information.

admin/goods_update.php in PHPMyWind 5.5 allows Admin users to execute arbitrary code via the attrvalue[] array parameter.

SOY CMS v3.0.2 allows remote attackers to execute arbitrary PHP code via a <?php substring in the second text box. NOTE: the vendor indicates that there was an assumption that the content is "made editable on its own.

A sandbox bypass vulnerability in Jenkins Script Security Plugin 1.64 and earlier related to the handling of default parameter expressions in constructors allowed attackers to execute arbitrary code in sandboxed scripts.

An eval injection vulnerability in the Python web server routing on the Zyxel NAS 326 version 5.21 and below allows a remote authenticated attacker to execute arbitrary code via the tjp6jp6y4, simZysh, and ck6fup6 APIs.