Heap-based buffer overflow in Cirrus CLGD 54xx VGA Emulator in Quick Emulator (Qemu) 2.8 and earlier allows local guest OS users to execute arbitrary code or cause a denial of service (crash) via vectors related to a VNC client updating its display after a VGA operation.

The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of service or potential code execution. QEMU up to (including) 5.2.0 is affected by this.

Qemu 1.1.2+dfsg to 2.1+dfsg suffers from a buffer overrun which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.

The esp_reg_write function in hw/scsi/esp.c in the 53C9X Fast SCSI Controller (FSC) support in QEMU does not properly check command buffer length, which allows local guest OS administrators to cause a denial of service (out-of-bounds write and QEMU process crash) or potentially execute arbitrary code on the QEMU host via unspecified vectors.

Multiple buffer overflows in QEMU before 1.7.2 and 2.x before 2.0.0, allow local users to cause a denial of service (crash) or possibly execute arbitrary code via a large (1) L1 table in the qcow2_snapshot_load_tmp in the QCOW 2 block driver (block/qcow2-snapshot.c) or (2) uncompressed chunk, (3) chunk length, or (4) number of sectors in the DMG block driver (block/dmg.c).

hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address in an msi-x mmio operation.

Quick Emulator (Qemu) built with the VirtFS, host directory sharing via Plan 9 File System(9pfs) support, is vulnerable to an improper access control issue. It could occur while accessing virtfs metadata files in mapped-file security mode. A guest user could use this flaw to escalate their privileges inside guest.

A heap-based buffer overflow was found in QEMU through 5.0.0 in the SDHCI device emulation support. It could occur while doing a multi block SDMA transfer via the sdhci_sdma_transfer_multi_blocks() routine in hw/sd/sdhci.c. A guest user or process could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or potentially execute arbitrary code with privileges of the QEMU process on the host.

A flaw was found in the QXL display device emulation in QEMU. A double fetch of guest controlled values `cursor->header.width` and `cursor->header.height` can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. A malicious privileged guest user could use this flaw to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.

An user able to alter the savevm data (either on the disk or over the wire during migration) could use this flaw to to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.

An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the host.

An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET' command from the guest. It could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service condition, or potential code execution with the privileges of the QEMU process.

qemu-bridge-helper.c in QEMU 3.1 and 4.0.0 does not ensure that a network interface name (obtained from bridge.conf or a --br=bridge option) is limited to the IFNAMSIZ size, which can lead to an ACL bypass.

The load_multiboot function in hw/i386/multiboot.c in Quick Emulator (aka QEMU) allows local guest OS users to execute arbitrary code on the QEMU host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access.

An OOB heap buffer r/w access issue was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process.

Heap-based buffer overflow in the iscsi_aio_ioctl function in block/iscsi.c in QEMU allows local guest OS users to cause a denial of service (QEMU process crash) or possibly execute arbitrary code via a crafted iSCSI asynchronous I/O ioctl call.

The (1) esp_reg_read and (2) esp_reg_write functions in hw/scsi/esp.c in QEMU allow local guest OS administrators to cause a denial of service (QEMU process crash) or execute arbitrary code on the QEMU host via vectors related to the information transfer buffer.

A use-after-free vulnerability was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0 during the handling of the 'Information Transfer' command (CMD_TI). This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service or potential code execution with the privileges of the QEMU process.

A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. This flaw allows a crafted guest driver to execute HW commands when shared buffers are not yet allocated, potentially leading to a use-after-free condition.

Heap-based buffer overflow in the pcnet_receive function in hw/net/pcnet.c in QEMU allows guest OS administrators to cause a denial of service (instance crash) or possibly execute arbitrary code via a series of packets in loopback mode.

Off-by-one error in the pci_read function in the ACPI PCI hotplug interface (hw/acpi/pcihp.c) in QEMU allows local guest users to obtain sensitive information and have other unspecified impact related to a crafted PCI device that triggers memory corruption.

In QEMU 3.0.0, tcp_emu in slirp/tcp_subr.c has a heap-based buffer overflow.

A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc() function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.

A DMA reentrancy issue was found in the USB EHCI controller emulation of QEMU. EHCI does not verify if the Buffer Pointer overlaps with its MMIO region when it transfers the USB packets. Crafted content may be written to the controller's registers and trigger undesirable actions (such as reset) while the device is still transferring packets. This can ultimately lead to a use-after-free issue. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or potentially execute arbitrary code within the context of the QEMU process on the host. This flaw affects QEMU versions before 7.0.0.

Integer overflow in the qcow_open function in block/qcow.c in QEMU before 1.7.2 allows local users to cause a denial of service (crash) and possibly execute arbitrary code via a large image size, which triggers a buffer overflow or out-of-bounds read.

A flaw was found in qemu. A host privilege escalation issue was found in the virtio-fs shared file system daemon where a privileged guest user is able to create a device special file in the shared directory and use it to r/w access host devices.

QEMU does not properly restrict write access to the PCI config space for certain PCI pass-through devices, which might allow local x86 HVM guests to gain privileges, cause a denial of service (host crash), obtain sensitive information, or possibly have other unspecified impact via unknown vectors.

Buffer overflow in the "megasas_mmio_write" function in Qemu 2.9.0 allows remote attackers to have unspecified impact via unknown vectors.

A stack buffer overflow flaw was found in the Quick Emulator (QEMU) before 2.9 built with the Network Block Device (NBD) client support. The flaw could occur while processing server's response to a 'NBD_OPT_LIST' request. A malicious NBD server could use this issue to crash a remote NBD client resulting in DoS or potentially execute arbitrary code on client host with privileges of the QEMU process.

Buffer overflow in the pxa2xx_ssp_load function in hw/arm/pxa2xx.c in QEMU before 1.7.2 allows remote attackers to cause a denial of service or possibly execute arbitrary code via a crafted s->rx_level value in a savevm image.

Buffer overflow in virtio_net_load function in net/virtio-net.c in QEMU 1.3.0 through 1.7.x before 1.7.2 might allow remote attackers to execute arbitrary code via a large MAC table.

Multiple buffer overflows in the tsc210x_load function in hw/input/tsc210x.c in QEMU before 1.7.2 might allow remote attackers to execute arbitrary code via a crafted (1) precision, (2) nextprecision, (3) function, or (4) nextfunction value in a savevm image.

Buffer overflow in hw/intc/openpic.c in QEMU before 1.7.2 allows remote attackers to cause a denial of service or possibly execute arbitrary code via vectors related to IRQDest elements.

Buffer overflow in hw/ssi/pl022.c in QEMU before 1.7.2 allows remote attackers to cause a denial of service or possibly execute arbitrary code via crafted tx_fifo_head and rx_fifo_head values in a savevm image.

Multiple buffer overflows in the ssd0323_load function in hw/display/ssd0323.c in QEMU before 1.7.2 allow remote attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via crafted (1) cmd_len, (2) row, or (3) col values; (4) row_start and row_end values; or (5) col_star and col_end values in a savevm image.

Buffer overflow in hw/timer/hpet.c in QEMU before 1.7.2 might allow remote attackers to execute arbitrary code via vectors related to the number of timers.

The virtio_net_load function in hw/net/virtio-net.c in QEMU 1.5.0 through 1.7.x before 1.7.2 allows remote attackers to cause a denial of service or possibly execute arbitrary code via vectors in which the value of curr_queues is greater than max_queues, which triggers an out-of-bounds write.

Buffer overflow in hw/ide/ahci.c in QEMU before 1.7.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via vectors related to migrating ports.

The usb_device_post_load function in hw/usb/bus.c in QEMU before 1.7.2 might allow remote attackers to execute arbitrary code via a crafted savevm image, related to a negative setup_len or setup_index value.

Buffer overflow in target-arm/machine.c in QEMU before 1.7.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via a negative value in cpreg_vmstate_array_len in a savevm image.

The virtio_scsi_load_request function in hw/scsi/scsi-bus.c in QEMU before 1.7.2 might allow remote attackers to execute arbitrary code via a crafted savevm image, which triggers an out-of-bounds array access.

Buffer overflow in scoop_gpio_handler_update in QEMU before 1.7.2 might allow remote attackers to execute arbitrary code via a large (1) prev_level, (2) gpio_level, or (3) gpio_dir value in a savevm image.

Buffer overflow in hw/pci/pcie_aer.c in QEMU before 1.7.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via a large log_num value in a savevm image.

Multiple heap-based buffer overflows in the virtio-blk driver (hw/virtio-blk.c) in qemu-kvm 0.14.0 allow local guest users to cause a denial of service (guest crash) and possibly gain privileges via a (1) write request to the virtio_blk_handle_write function or (2) read request to the virtio_blk_handle_read function that is not properly aligned.