A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. This flaw allows a crafted guest driver to execute HW commands when shared buffers are not yet allocated, potentially leading to a use-after-free condition.

A DMA reentrancy issue was found in the USB EHCI controller emulation of QEMU. EHCI does not verify if the Buffer Pointer overlaps with its MMIO region when it transfers the USB packets. Crafted content may be written to the controller's registers and trigger undesirable actions (such as reset) while the device is still transferring packets. This can ultimately lead to a use-after-free issue. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or potentially execute arbitrary code within the context of the QEMU process on the host. This flaw affects QEMU versions before 7.0.0.

Quick Emulator (Qemu) built with the VirtFS, host directory sharing via Plan 9 File System(9pfs) support, is vulnerable to an improper access control issue. It could occur while accessing virtfs metadata files in mapped-file security mode. A guest user could use this flaw to escalate their privileges inside guest.

Heap-based buffer overflow in Cirrus CLGD 54xx VGA Emulator in Quick Emulator (Qemu) 2.8 and earlier allows local guest OS users to execute arbitrary code or cause a denial of service (crash) via vectors related to a VNC client updating its display after a VGA operation.

A heap-based buffer overflow was found in QEMU through 5.0.0 in the SDHCI device emulation support. It could occur while doing a multi block SDMA transfer via the sdhci_sdma_transfer_multi_blocks() routine in hw/sd/sdhci.c. A guest user or process could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or potentially execute arbitrary code with privileges of the QEMU process on the host.

A flaw was found in the QXL display device emulation in QEMU. A double fetch of guest controlled values `cursor->header.width` and `cursor->header.height` can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. A malicious privileged guest user could use this flaw to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.

An user able to alter the savevm data (either on the disk or over the wire during migration) could use this flaw to to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.

An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the host.

An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET' command from the guest. It could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service condition, or potential code execution with the privileges of the QEMU process.

The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of service or potential code execution. QEMU up to (including) 5.2.0 is affected by this.

Qemu 1.1.2+dfsg to 2.1+dfsg suffers from a buffer overrun which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.

qemu-bridge-helper.c in QEMU 3.1 and 4.0.0 does not ensure that a network interface name (obtained from bridge.conf or a --br=bridge option) is limited to the IFNAMSIZ size, which can lead to an ACL bypass.

The load_multiboot function in hw/i386/multiboot.c in Quick Emulator (aka QEMU) allows local guest OS users to execute arbitrary code on the QEMU host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access.

An OOB heap buffer r/w access issue was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process.

The esp_do_dma function in hw/scsi/esp.c in QEMU (aka Quick Emulator), when built with ESP/NCR53C9x controller emulation support, allows local guest OS administrators to cause a denial of service (out-of-bounds write and QEMU process crash) or execute arbitrary code on the QEMU host via vectors involving DMA read into ESP command buffer.

Heap-based buffer overflow in the iscsi_aio_ioctl function in block/iscsi.c in QEMU allows local guest OS users to cause a denial of service (QEMU process crash) or possibly execute arbitrary code via a crafted iSCSI asynchronous I/O ioctl call.

The (1) esp_reg_read and (2) esp_reg_write functions in hw/scsi/esp.c in QEMU allow local guest OS administrators to cause a denial of service (QEMU process crash) or execute arbitrary code on the QEMU host via vectors related to the information transfer buffer.

The esp_reg_write function in hw/scsi/esp.c in the 53C9X Fast SCSI Controller (FSC) support in QEMU does not properly check command buffer length, which allows local guest OS administrators to cause a denial of service (out-of-bounds write and QEMU process crash) or potentially execute arbitrary code on the QEMU host via unspecified vectors.

Heap-based buffer overflow in the pcnet_receive function in hw/net/pcnet.c in QEMU allows guest OS administrators to cause a denial of service (instance crash) or possibly execute arbitrary code via a series of packets in loopback mode.

Heap-based buffer overflow in the Cirrus VGA emulator (hw/display/cirrus_vga.c) in QEMU before 2.2.0 allows local guest users to execute arbitrary code via vectors related to blit regions. NOTE: this vulnerability exists because an incomplete fix for CVE-2007-1320.

Off-by-one error in the pci_read function in the ACPI PCI hotplug interface (hw/acpi/pcihp.c) in QEMU allows local guest users to obtain sensitive information and have other unspecified impact related to a crafted PCI device that triggers memory corruption.

Multiple buffer overflows in QEMU before 1.7.2 and 2.x before 2.0.0, allow local users to cause a denial of service (crash) or possibly execute arbitrary code via a large (1) L1 table in the qcow2_snapshot_load_tmp in the QCOW 2 block driver (block/qcow2-snapshot.c) or (2) uncompressed chunk, (3) chunk length, or (4) number of sectors in the DMG block driver (block/dmg.c).

hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address in an msi-x mmio operation.

In QEMU 3.0.0, tcp_emu in slirp/tcp_subr.c has a heap-based buffer overflow.

A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc() function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.

Integer overflow in the qcow_open function in block/qcow.c in QEMU before 1.7.2 allows local users to cause a denial of service (crash) and possibly execute arbitrary code via a large image size, which triggers a buffer overflow or out-of-bounds read.

A flaw was found in qemu. A host privilege escalation issue was found in the virtio-fs shared file system daemon where a privileged guest user is able to create a device special file in the shared directory and use it to r/w access host devices.

QEMU does not properly restrict write access to the PCI config space for certain PCI pass-through devices, which might allow local x86 HVM guests to gain privileges, cause a denial of service (host crash), obtain sensitive information, or possibly have other unspecified impact via unknown vectors.

A DMA reentrancy issue was found in the NVM Express Controller (NVME) emulation in QEMU. This CVE is similar to CVE-2021-3750 and, just like it, when the reentrancy write triggers the reset function nvme_ctrl_reset(), data structs will be freed leading to a use-after-free issue. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition or, potentially, executing arbitrary code within the context of the QEMU process on the host.

A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the descriptor's address belongs to the non direct access region, due to num_buffers being set after the virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a denial of service condition, or potentially execute code on the host with the privileges of the QEMU process.

A use-after-free flaw was found in the MegaRAID emulator of QEMU. This issue occurs while processing SCSI I/O requests in the case of an error mptsas_free_request() that does not dequeue the request object 'req' from a pending requests queue. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. Versions between 2.10.0 and 5.2.0 are potentially affected.

Use-after-free vulnerability in the sofree function in slirp/socket.c in QEMU (aka Quick Emulator) allows attackers to cause a denial of service (QEMU instance crash) by leveraging failure to properly clear ifq_so from pending packets.

Multiple use-after-free vulnerabilities in vnc.c in the VNC server in QEMU 0.10.6 and earlier might allow guest OS users to execute arbitrary code on the host OS by establishing a connection from a VNC client and then (1) disconnecting during data transfer, (2) sending a message using incorrect integer data types, or (3) using the Fuzzy Screen Mode protocol, related to double free vulnerabilities.

libslirp 4.0.0, as used in QEMU 4.1.0, has a use-after-free in ip_reass in ip_input.c.

A DMA reentrancy issue leading to a use-after-free error was found in the e1000e NIC emulation code in QEMU. This issue could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.

Quick Emulator (Qemu) built with the 'chardev' backend support is vulnerable to a use after free issue. It could occur while hotplug and unplugging the device in the guest. A guest user/process could use this flaw to crash a Qemu process on the host resulting in DoS.

This CVE exists because of an incomplete fix for CVE-2021-3750. More specifically, the qemu-kvm package as released for Red Hat Enterprise Linux 9.1 via RHSA-2022:7967 included a version of qemu-kvm that was actually missing the fix for CVE-2021-3750.

hw/9pfs/cofile.c and hw/9pfs/9p.c in QEMU can modify an fid path while it is being accessed by a second thread, leading to (for example) a use-after-free outcome.

Use-after-free vulnerability in the vmxnet3_io_bar0_write function in hw/net/vmxnet3.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (QEMU instance crash) by leveraging failure to check if the device is active.

Use-after-free vulnerability in hw/ide/ahci.c in QEMU, when built with IDE AHCI Emulation support, allows guest OS users to cause a denial of service (instance crash) or possibly execute arbitrary code via an invalid AHCI Native Command Queuing (NCQ) AIO command.

Use-after-free vulnerability in hw/pci/pcie.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (QEMU instance crash) via hotplug and hotunplug operations of Virtio block devices.

QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not checked.

QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e packet with the data's address set to the e1000e's MMIO address.

A use-after-free vulnerability was found in the LSI53C895A SCSI Host Bus Adapter emulation of QEMU. The flaw occurs while processing repeated messages to cancel the current SCSI request via the lsi_do_msgout function. This flaw allows a malicious privileged user within the guest to crash the QEMU process on the host, resulting in a denial of service.

A use-after-free vulnerability was found in the QEMU LSI53C895A SCSI Host Bus Adapter emulation. This issue can lead to a crash or VM escape.

In function msm_pcm_playback_close() in all Android releases from CAF using the Linux kernel, prtd is assigned substream->runtime->private_data. Later, prtd is freed. However, prtd is not sanitized and set to NULL, resulting in a dangling pointer. There are other functions that access the same memory (substream->runtime->private_data) with a NULL check, such as msm_pcm_volume_ctl_put(), which means this freed memory could be used.

Memory corruption while processing multiple IOCTL calls from HLOS to DSP.

This vulnerability could allow an attacker to disclose information and execute arbitrary code on affected installations of WebAccess/MHI Designer

TensorFlow is an open source platform for machine learning. In affected versions the async implementation of `CollectiveReduceV2` suffers from a memory leak and a use after free. This occurs due to the asynchronous computation and the fact that objects that have been `std::move()`d from are still accessed. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, as this version is the only one that is also affected.

Win32k Elevation of Privilege Vulnerability