The UPnP IGD implementation on the Thomson (aka Technicolor) TG585 with firmware 7.x before 7.4.3.2 allows remote attackers to establish arbitrary port mappings by sending a UPnP AddPortMapping action in a SOAP request to the WAN interface, related to an "external forwarding" vulnerability.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetPppoeServer. This vulnerability allows attackers to execute arbitrary commands via the pppoeServerIP, pppoeServerStartIP, and pppoeServerEndIP parameters.

Tenda AX3 v16.03.12.10_CN was discovered to contain a command injection vulnerability in the function WanParameterSetting. This vulnerability allows attackers to execute arbitrary commands via the gateway, dns1, and dns2 parameters.

Tenda AX3 v16.03.12.10_CN was discovered to contain a command injection vulnerability in the function mDMZSetCfg. This vulnerability allows attackers to execute arbitrary commands via the dmzIp parameter.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetQvlanList. This vulnerability allows attackers to execute arbitrary commands via the qvlanIP parameter.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetIpGroup. This vulnerability allows attackers to execute arbitrary commands via the IPGroupStartIP and IPGroupEndIP parameters.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetDMZ. This vulnerability allows attackers to execute arbitrary commands via the dmzHost1 parameter.

The _httpsrequest function in Snoopy allows remote attackers to execute arbitrary commands. NOTE: this issue exists dues to an incomplete fix for CVE-2008-4796.

A vulnerability, which was classified as critical, has been found in Zend.To up to 6.10-6 Beta. This issue affects the function exec of the file NSSDropoff.php. The manipulation of the argument file_1 leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 6.10-7 is able to address this issue. It is recommended to upgrade the affected component. This affects a rather old version of the software. The vendor recommends updating to the latest release. Additional countermeasures have been added in 6.15-8.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

In Pluck-4.7.10-dev2 admin background, a remote command execution vulnerability exists when uploading files.

An issue in craigms/main.php of CraigMS 1.0 allows attackers to execute arbitrary commands via a crafted input entered into the DB Name field.

Barco TransForm NDN-210 Lite, NDN-210 Pro, NDN-211 Lite, and NDN-211 Pro before 3.8 allows Command Injection (issue 1 of 4). The NDN-210 has a web administration panel which is made available over https. The logon method is basic authentication. There is a command injection issue that will result in unauthenticated remote code execution in the username and password fields of the logon prompt. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

Command injection vulnerability in login.php in Synology Photo Station before 6.5.3-3226 allows remote attackers to execute arbitrary code via shell metacharacters in the crafted 'X-Forwarded-For' header.

UI-Dialog 1.09 and earlier allows remote attackers to execute arbitrary commands.

QNAP has already patched this vulnerability. This security concern allows a remote attacker to run arbitrary commands on the QNAP Video Station 5.1.3 (for QTS 4.3.3), 5.2.0 (for QTS 4.3.4), and earlier.

QNAP discovered a number of command injection vulnerabilities found in Music Station versions 4.8.6 (for QTS 4.2.x), 5.0.7 (for QTS 4.3.x), and earlier. If exploited, these vulnerabilities may allow a remote attacker to run arbitrary commands on the NAS.

A vulnerability was found in Ruijie RG-NBS2009G-P up to 20240305. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /EXCU_SHELL. The manipulation of the argument Command1 leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257281 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Gitlab Community Edition version 10.3 is vulnerable to a lack of input validation in the system_hook_push queue through web hook component resulting in remote code execution.

Gitlab Community Edition version 10.2.4 is vulnerable to a lack of input validation in the GitlabProjectsImportService resulting in remote code execution.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability exists in apply.cgi on the ASUS RP-AC52 access point, firmware version 1.0.1.1s and possibly earlier, web interface specifically in the action_script parameter. The action_script parameter specifies a script to be executed if the action_mode parameter does not contain a valid state. If the input provided by action_script does not match one of the hard coded options, then it will be executed as the argument of either a system() or an eval() call allowing arbitrary commands to be executed.

An issue was discovered in Cloud Foundry Foundation Cloud Foundry release versions prior to v245 and cf-mysql-release versions prior to v31. A command injection vulnerability was discovered in a common script used by many Cloud Foundry components. A malicious user may exploit numerous vectors to execute arbitrary commands on servers running Cloud Foundry.

Wavlink WL-WN575A3 RPT75A3.V4300.201217 was discovered to contain a command injection vulnerability via the function obtw. This vulnerability allows attackers to execute arbitrary commands via a crafted POST request.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStationSettings. This vulnerability allows attackers to execute arbitrary commands via the station_access_enable parameter.

The firmware on Moxa TN-5900 devices through 3.1 allows command injection that could lead to device damage.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function usb_paswd.asp. This vulnerability allows attackers to execute arbitrary commands via the name parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanApcliSettings. This vulnerability allows attackers to execute arbitrary commands via the ApCliKeyStr parameter.

A Command injection vulnerability exists in Tenda AC10U AC1200 Smart Dual-band Wireless Router AC10U V1.0 Firmware V15.03.06.49_multi via the setUsbUnload functionality. The vulnerability is caused because the client controlled "deviceName" value is passed directly to the "doSystemCmd" function.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via the tomography_ping_address, tomography_ping_number, tomography_ping_size, tomography_ping_timeout, and tomography_ping_ttl parameters.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects XR300 before 1.0.3.68, R7000P before 1.3.3.140, and R6900P before 1.3.3.140.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function version_upgrade.asp. This vulnerability allows attackers to execute arbitrary commands via the path parameter.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the LocalIPAddress parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function urlrd_opt.asp. This vulnerability allows attackers to execute arbitrary commands via the url_en parameter.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

An issue was discovered on SendQuick Entera and Avera devices before 2HF16. Multiple Command Injection vulnerabilities allow attackers to execute arbitrary system commands.

Totolink devices A3100R v4.1.2cu.5050_B20200504, A830R v5.9c.4729_B20191112, and A720R v4.1.5cu.470_B20200911 were discovered to contain command injection vulnerability in the function setNoticeCfg. This vulnerability allows attackers to execute arbitrary commands via the IpFrom parameter.

Haraka version 2.8.8 and earlier comes with a plugin for processing attachments for zip files. Versions 2.8.8 and earlier can be vulnerable to command injection.

The festivaltts4r gem for Ruby allows remote attackers to execute arbitrary commands via shell metacharacters in a string to the (1) to_speech or (2) to_mp3 method in lib/festivaltts4r/festival4r.rb.

The setFrom function in the Sendmail adapter in the zend-mail component before 2.4.11, 2.5.x, 2.6.x, and 2.7.x before 2.7.2, and Zend Framework before 2.4.11 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address.

The mail transport (aka Swift_Transport_MailTransport) in Swift Mailer before 5.4.5 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address in the (1) From, (2) ReturnPath, or (3) Sender header.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

Mailcwp remote file upload vulnerability incomplete fix v1.100

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the checkNet function in /cgi-bin/luci/api/auth.

An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

A Remote Command Injection vulnerability exists in DrayTek Vigor 2960 1.5.1.3, DrayTek Vigor 3900 1.5.1.3, and DrayTek Vigor 300B 1.5.1.3 via a crafted HTTP message containing malformed QUERY STRING in mainfunction.cgi, which could let a remote malicious user execute arbitrary code.

iTextPDF in iText 7 and up to (excluding 4.4.13.3) 7.1.17 allows command injection via a CompareTool filename that is mishandled on the gs (aka Ghostscript) command line in GhostscriptHelper.java.