A command injection vulnerability exists in the dashboard scheduler feature of the ScienceLogic SL1 that takes unsanitized user‐controlled input and passes it directly to a shell command. This allows for the injection of arbitrary commands to the underlying operating system.

A command injection vulnerability exists in the ticket report generate feature of the ScienceLogic SL1 that takes unsanitized user controlled input and passes it directly to a shell command. This allows for the injection of arbitrary commands to the underlying operating system.

A SQL injection vulnerability exists in the “topology data service” feature of the ScienceLogic SL1 that takes unsanitized user‐controlled input and passes it directly to a SQL query. This allows for the injection of arbitrary SQL before being executed against the database.

A SQL injection vulnerability exists in the “ticket event report” feature of the ScienceLogic SL1 that takes unsanitized user‐controlled input and passes it directly to a SQL query. This allows for the injection of arbitrary SQL before being executed against the database.

Operating system command injection in ekorCCP and ekorRCI, which could allow an authenticated attacker to execute commands, create new users with elevated privileges or set up a backdoor.

D-Link DIR-846 Firmware FW100A53DBR was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

A Remote Code Execution (RCE) issue in the addon CUx-Daemon 1.11a of the eQ-3 Homematic CCU-Firmware 2.35.16 until 2.45.6 allows remote authenticated attackers to execute system commands as root remotely via a simple HTTP request.

Acemanager in ALEOS before version 4.16 allows a user with valid credentials to manipulate the IP logging operation to execute arbitrary shell commands on the device.

Multiple Xiongmai NVR devices, including MBD6304T V4.02.R11.00000117.10001.131900.00000 and NBD6808T-PL V4.02.R11.C7431119.12001.130000.00000, allow authenticated users to execute arbitrary commands as root, as exploited in the wild starting in approximately 2019. A remote and authenticated attacker, possibly using the default admin:tlJwpbo6 credentials, can connect to port 34567 and execute arbitrary operating system commands via a crafted JSON file during an upgrade request. Since at least 2021, Xiongmai has applied patches to prevent attackers from using this mechanism to execute telnetd.

Tenda AX12 V22.03.01.21_CN was found to have a command injection vulnerability via /goform/setMacFilterCfg function.

The Java Admin Console in Veritas NetBackup through 10.1 and related Veritas products on Linux and UNIX allows authenticated non-root users (that have been explicitly added to the auth.conf file) to execute arbitrary commands as root.

A vulnerability has been found in Tenda W30E 1.0.1.25(633) and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-260914 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability has been reported to affect Notes Station 3. If exploited, the vulnerability could allow remote authenticated attackers to execute commands. We have already fixed the vulnerability in the following version: Notes Station 3 3.9.7 and later

Tenda AX12 V22.03.01.16_cn is vulnerable to command injection via goform/fast_setting_internet_set.

Dell Unisphere for PowerMax vApp, VASA Provider vApp, and Solution Enabler vApp version 9.2.3.x contain a command execution vulnerability. A low privileged remote attacker could potentially exploit this vulnerability, leading to execute arbitrary commands on the underlying system.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.

OS Command Injection vulnerability in Rapid7 InsightConnect SQLmap Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the api_host or api_port parameters during connection configuration due to insufficient input validation.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in StylemixThemes Consulting Elementor Widgets, StylemixThemes Masterstudy Elementor Widgets allows OS Command Injection.This issue affects Consulting Elementor Widgets: from n/a through 1.3.0; Masterstudy Elementor Widgets: from n/a through 1.2.2.

OS Command Injection vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the expression parameter due to insufficient input validation.

The web service on Nexxt Amp300 ARN02304U8 42.103.1.5095 and 80.103.2.5045 devices allows remote OS command execution by placing &telnetd in the JSON host field to the ping feature of the goform/sysTools component. Authentication is required

IBM Security Guardium 11.4 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 240901.

In ScadaBR version 1.2.0, an OS Command Injection vulnerability could allow an attacker to execute commands as root on the SCADA system.

Dell PowerProtect DD, versions prior to 8.0, LTS 7.13.1.0, LTS 7.10.1.30, LTS 7.7.5.40 contain an OS command injection vulnerability in an admin operation. A remote low privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the system application's underlying OS with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

A vulnerability in the IBM TS7700 Management Interface 8.51.2.12, 8.52.200.111, 8.52.102.13, and 8.53.0.63 could allow an authenticated user to submit a specially crafted URL leading to privilege escalation and remote code execution. IBM X-Force ID: 246320.

Ruckus through 1.5.1.0.21 is affected by remote command injection. An authenticated user can submit a query to the API (/service/v1/createUser endpoint), injecting arbitrary commands that will be executed as root user via web.py.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.

In systeminformation (npm package) before version 4.31.1 there is a command injection vulnerability. The problem was fixed in version 4.31.1 with a shell string sanitation fix.

An issue was discovered in SolarWinds N-Central 12.3.0.670. The sudo configuration has incorrect access control because the nable web user account is effectively able to run arbitrary OS commands as root (i.e., the use of root privileges is not limited to specific programs listed in the sudoers file).

UCOPIA Wi-Fi appliances 6.0.5 allow authenticated remote attackers to escape the restricted administration shell CLI, and access a shell with admin user rights, via an unprotected less command.

MailGates and MailAudit products contain Command Injection flaw, which can be used to inject and execute system commands from the cgi parameter after attackers obtain the user’s access token.

XStream before version 1.4.14 is vulnerable to Remote Code Execution.The vulnerability may allow a remote attacker to run arbitrary shell commands only by manipulating the processed input stream. Only users who rely on blocklists are affected. Anyone using XStream's Security Framework allowlist is not affected. The linked advisory provides code workarounds for users who cannot upgrade. The issue is fixed in version 1.4.14.

The theme.php file in SDCMS 2.8 has a command execution vulnerability that allows for the execution of system commands

A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300.

An issue was discovered on Enphase Envoy R3.x and D4.x (and other current) devices. The upgrade_start function in /installer/upgrade_start allows remote authenticated users to execute arbitrary commands via the force parameter.

An issue was discovered on D-Link DSR-250 3.17 devices. Certain functionality in the Unified Services Router web interface could allow an authenticated attacker to execute arbitrary commands, due to a lack of validation of inputs provided in multipart HTTP POST requests.

OS command injection vulnerability in UDR-JA1604/UDR-JA1608/UDR-JA1616 firmware versions 71x10.1.107112.43A and earlier allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.

TOTOLINK A3002RU-V2.0.0 B20190814.1034 allows authenticated remote users to modify the system's 'Run Command'. An attacker can use this functionality to execute arbitrary OS commands on the router.

An OS command injection vulnerability has been reported to affect QNAP operating systems. If exploited, the vulnerability allows remote authenticated users to execute commands via susceptible QNAP devices. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2376 build 20230421 and later QTS 4.5.4.2374 build 20230416 and later QuTS hero h5.0.1.2376 build 20230421 and later QuTS hero h4.5.4.2374 build 20230417 and later QuTScloud c5.0.1.2374 and later

OS Command Injection vulnerability in Rapid7 InsightConnect RPM Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the repo, key, or name parameters due to insufficient input sanitization in shell command construction.

FutureNet NXR series, VXR series and WXR series provided by Century Systems Co., Ltd. contain an active debug code vulnerability. If a user who knows how to use the debug function logs in to the product, the debug function may be used and an arbitrary OS command may be executed.

A command injection vulnerability in the CGI program of Zyxel NR7101 firmware prior to V1.15(ACCC.3)C0, which could allow an authenticated attacker to execute some OS commands on a vulnerable device by sending a crafted HTTP request.

Hidden functionality vulnerability in UDR-JA1604/UDR-JA1608/UDR-JA1616 firmware versions 71x10.1.107112.43A and earlier allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.

A command injection vulnerability exists in GestioIP 3.0 commit ac67be and earlier in ip_checkhost.cgi. Crafted input to the 'ip' parameter allows attackers to execute arbitrary shell commands on the server via embedded base64-encoded payloads. Authentication may be required depending on deployment configuration.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'.

An issue was discovered on Gemtek WRTM-127ACN 01.01.02.141 and WRTM-127x9 01.01.02.127 devices. The Monitor Diagnostic network page allows an authenticated attacker to execute a command directly on the target machine. Commands are executed as the root user (uid 0). (Even if a login is required, most routers are left with default credentials.)

Jenkins Selection tasks Plugin 1.0 and earlier executes a user-specified program on the Jenkins controller, allowing attackers with Job/Configure permission to execute an arbitrary system command on the Jenkins controller as the OS user that the Jenkins process is running as.

NVIDIA BMC contains a vulnerability in SPX REST API, where an authorized attacker can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure and data tampering.

A Command Injection vulnerability exists in Vivotek PT7135 IP Cameras 0300a and 0400a via the system.ntp parameter to the farseer.out binary file, which cold let a malicious user execute arbitrary code.