The XrayWrapper implementation in Mozilla Firefox before 17.0, Thunderbird before 17.0, and SeaMonkey before 2.14 does not consider the compartment during property filtering, which allows remote attackers to bypass intended chrome-only restrictions on reading DOM object properties via a crafted web site.
The curl_easy_duphandle function in libcurl 7.17.1 through 7.38.0, when running with the CURLOPT_COPYPOSTFIELDS option, does not properly copy HTTP POST data for an easy handle, which triggers an out-of-bounds read that allows remote web servers to read sensitive memory information.
Mozilla Firefox before 15.0, Firefox ESR 10.x before 10.0.7, and SeaMonkey before 2.12 do not properly handle onLocationChange events during navigation between different https sites, which allows remote attackers to spoof the X.509 certificate information in the address bar via a crafted web page.
Inappropriate implementation in WebRTC in Google Chrome prior to 84.0.4147.89 allowed an attacker in a privileged network position to potentially exploit heap corruption via a crafted SCTP stream.
The /log endpoint on a Juju controller lacked sufficient authorization checks, allowing unauthorized users to access debug messages that could contain sensitive information.
An exploitable memory corruption vulnerability exists in the handling of the MXIT protocol in Pidgin. Specially crafted MXIT MultiMX message sent via the server can result in an out-of-bounds write leading to memory disclosure and code execution.
Information Exposure vulnerability in eXtplorer makes the /usr/ and /etc/extplorer/ system directories world-accessible over HTTP. Introduced in the Makefile patch file debian/patches/debian-changes-2.1.0b6+dfsg-1 or debian/patches/adds-a-makefile.patch, this can lead to data leakage, information disclosure and potentially remote code execution on the web server. This issue affects all versions of eXtplorer in Ubuntu and Debian
strongSwan 4.3.0 through 5.x before 5.3.2 and strongSwan VPN Client before 1.4.6, when using EAP or pre-shared keys for authenticating an IKEv2 connection, does not enforce server authentication restrictions until the entire authentication process is complete, which allows remote servers to obtain credentials by using a valid certificate and then reading the responses.
LibreOffice before 4.4.5 and Apache OpenOffice before 4.1.2 uses the stored LinkUpdateMode configuration information in OpenDocument Format files and templates when handling links, which might allow remote attackers to obtain sensitive information via a crafted document, which embeds data from local files into (1) Calc or (2) Writer.
The Linux kernel before 5.4.1 on powerpc allows Information Exposure because the Spectre-RSB mitigation is not in place for all applicable CPUs, aka CID-39e72bf96f58. This is related to arch/powerpc/kernel/entry_64.S and arch/powerpc/kernel/security.c.
fs/proc/base.c in the Linux kernel through 3.1 allows local users to obtain sensitive keystroke information via access to /proc/interrupts.
Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.
An issue was discovered in the fd_locked_ioctl function in drivers/block/floppy.c in the Linux kernel through 4.15.7. The floppy driver will copy a kernel pointer to user memory in response to the FDGETPRM ioctl. An attacker can send the FDGETPRM ioctl and use the obtained kernel pointer to discover the location of kernel code and data and bypass kernel security protections such as KASLR.
The Linux kernel, as used in Ubuntu 18.04 LTS and Ubuntu 18.10, allows local users to obtain names of files in which they would not normally be able to access via an overlayfs mount inside of a user namespace.
The acpi_smbus_hc_add function in drivers/acpi/sbshc.c in the Linux kernel through 4.14.15 allows local users to obtain sensitive address information by reading dmesg data from an SBS HC printk call.
Simultaneous Multi-threading (SMT) in processors can enable local users to exploit software vulnerable to timing attacks via a side-channel timing attack on 'port contention'.
A Blob URL can violate origin attribute segregation, allowing it to be accessed from a private browsing tab and for data to be passed between the private browsing tab and a normal tab. This could allow for the leaking of private information specific to the private browsing context. This issue is mitigated by the requirement that the user enter the Blob URL manually in order for the access violation to occur. This vulnerability affects Firefox < 58.
An issue was discovered in certain Apple products. iOS before 11.3 is affected. Safari before 11.1 is affected. iCloud before 7.4 on Windows is affected. iTunes before 12.7.4 on Windows is affected. watchOS before 4.3 is affected. The issue involves the fetch API in the "WebKit" component. It allows remote attackers to bypass the Same Origin Policy and obtain sensitive information via a crafted web site.
If the "app.support.baseURL" preference is changed by a malicious local program to contain HTML and script content, this content is not sanitized. It will be executed if a user loads "chrome://browser/content/preferences/in-content/preferences.xul" directly in a tab and executes a search. This stored preference is also executed whenever an EME video player plugin displays a CDM-disabled message as a notification message. This vulnerability affects Firefox < 59.
The Find API for WebExtensions can search some privileged pages, such as "about:debugging", if these pages are open in a tab. This could allow a malicious WebExtension to search for otherwise protected data if a user has it open. This vulnerability affects Firefox < 59.
System software utilizing Lazy FP state restore technique on systems using Intel Core-based microprocessors may potentially allow a local process to infer data from another process through a speculative execution side channel.
An issue was discovered in the Linux kernel through 4.19. An information leak in cdrom_ioctl_select_disc in drivers/cdrom/cdrom.c could be used by local attackers to read kernel memory because a cast from unsigned long to int interferes with bounds checking. This is similar to CVE-2018-10940 and CVE-2018-16658.
Artifex Ghostscript allows attackers to bypass a sandbox protection mechanism by leveraging exposure of system operators in the saved execution stack in an error object.
An issue was discovered in the Linux kernel before 4.18.6. An information leak in cdrom_ioctl_drive_status in drivers/cdrom/cdrom.c could be used by local attackers to read kernel memory because a cast from unsigned long to int interferes with bounds checking. This is similar to CVE-2018-10940.
An out of bounds read was discovered in systemd-journald in the way it parses log messages that terminate with a colon ':'. A local attacker can use this flaw to disclose process memory data. Versions from v221 to v239 are vulnerable.
ansible before versions 2.5.14, 2.6.11, 2.7.5 is vulnerable to a information disclosure flaw in vvv+ mode with no_log on that can lead to leakage of sensible data.
In Artifex Ghostscript before 9.24, attackers able to supply crafted PostScript files could use incorrect access checking in temp file handling to disclose contents of files on the system otherwise not readable.
arch/x86/kernel/paravirt.c in the Linux kernel before 4.18.1 mishandles certain indirect calls, which makes it easier for attackers to conduct Spectre-v2 attacks against paravirtual guests.
ReadXBMImage in coders/xbm.c in ImageMagick before 7.0.8-9 leaves data uninitialized when processing an XBM file that has a negative pixel value. If the affected code is used as a library loaded into a process that includes sensitive information, that information sometimes can be leaked via the image data.
A WebExtension can request access to local files without the warning prompt stating that the extension will "Access your data for all websites" being displayed to the user. This allows extensions to run content scripts in local pages without permission warnings when a local file is opened. This vulnerability affects Firefox ESR < 60.3 and Firefox < 63.
Decrypted S/MIME parts, when included in HTML crafted for an attack, can leak plaintext when included in a a HTML reply/forward. This vulnerability affects Thunderbird < 52.9.
Plaintext of decrypted emails can leak through by user submitting an embedded form by pressing enter key within a text input field. This vulnerability affects Thunderbird < 52.9.
Service workers can use redirection to avoid the tainting of cross-origin resources in some instances, allowing a malicious site to read responses which are supposed to be opaque. This vulnerability affects Firefox < 61.
dDecrypted S/MIME parts hidden with CSS or the plaintext HTML tag can leak plaintext when included in a HTML reply/forward. This vulnerability affects Thunderbird < 52.9.
A compromised IPC child process can escape the content sandbox and list the names of arbitrary files on the file system without user consent or interaction. This could result in exposure of private local files. This vulnerability affects Thunderbird < 60, Thunderbird < 52.9, Firefox ESR < 60.1, Firefox ESR < 52.9, and Firefox < 61.
The DPDK vhost-user interface does not check to verify that all the requested guest physical range is mapped and contiguous when performing Guest Physical Addresses to Host Virtual Addresses translations. This may lead to a malicious guest exposing vhost-user backend process memory. All versions before 18.02.1 are vulnerable.
The compat_get_timex function in kernel/compat.c in the Linux kernel before 4.16.9 allows local users to obtain sensitive information from kernel memory via adjtimex.
An issue was discovered in PHP before 5.6.35, 7.0.x before 7.0.29, 7.1.x before 7.1.16, and 7.2.x before 7.2.4. Dumpable FPM child processes allow bypassing opcache access controls because fpm_unix.c makes a PR_SET_DUMPABLE prctl call, allowing one user (in a multiuser environment) to obtain sensitive information from the process memory of a second user's PHP applications by running gcore on the PID of the PHP-FPM worker process.
Incorrect caching of responses to requests including an Authorization header in HAProxy 1.8.0 through 1.8.9 (if cache enabled) allows attackers to achieve information disclosure via an unauthenticated remote request, related to the proto_http.c check_request_for_cacheability function.
A vulnerability was found in libpq, the default PostgreSQL client library where libpq failed to properly reset its internal state between connections. If an affected version of libpq was used with "host" or "hostaddr" connection parameters from untrusted input, attackers could bypass client-side connection security features, obtain access to higher privileged connections or potentially cause other impact through SQL injection, by causing the PQescape() functions to malfunction. Postgresql versions before 10.5, 9.6.10, 9.5.14, 9.4.19, and 9.3.24 are affected.
Linux kernel vhost since version 4.8 does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file.
The Samba Active Directory LDAP server was vulnerable to an information disclosure flaw because of missing access control checks. An authenticated attacker could use this flaw to extract confidential attribute values using LDAP search expressions. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.
libgcrypt before version 1.7.8 is vulnerable to a cache side-channel attack resulting into a complete break of RSA-1024 while using the left-to-right method for computing the sliding-window expansion. The same attack is believed to work on RSA-2048 with moderately more computation. This side-channel requires that attacker can run arbitrary software on the hardware where the private RSA key is used.
There is an overflow bug in the AVX2 Montgomery multiplication procedure used in exponentiation with 1024-bit moduli. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH1024 are considered just feasible, because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be significant. However, for an attack on TLS to be meaningful, the server would have to share the DH1024 private key among multiple clients, which is no longer an option since CVE-2016-0701. This only affects processors that support the AVX2 but not ADX extensions like Intel Haswell (4th generation). Note: The impact from this issue is similar to CVE-2017-3736, CVE-2017-3732 and CVE-2015-3193. OpenSSL version 1.0.2-1.0.2m and 1.1.0-1.1.0g are affected. Fixed in OpenSSL 1.0.2n. Due to the low severity of this issue we are not issuing a new release of OpenSSL 1.1.0 at this time. The fix will be included in OpenSSL 1.1.0h when it becomes available. The fix is also available in commit e502cc86d in the OpenSSL git repository.
There is a carry propagating bug in the x86_64 Montgomery squaring procedure in OpenSSL before 1.0.2m and 1.1.0 before 1.1.0g. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be very significant and likely only accessible to a limited number of attackers. An attacker would additionally need online access to an unpatched system using the target private key in a scenario with persistent DH parameters and a private key that is shared between multiple clients. This only affects processors that support the BMI1, BMI2 and ADX extensions like Intel Broadwell (5th generation) and later or AMD Ryzen.
There is a carry propagating bug in the x86_64 Montgomery squaring procedure in OpenSSL 1.0.2 before 1.0.2k and 1.1.0 before 1.1.0d. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be very significant and likely only accessible to a limited number of attackers. An attacker would additionally need online access to an unpatched system using the target private key in a scenario with persistent DH parameters and a private key that is shared between multiple clients. For example this can occur by default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very similar to CVE-2015-3193 but must be treated as a separate problem.
The sync-exec module is used to simulate child_process.execSync in node versions <0.11.9. Sync-exec uses tmp directories as a buffer before returning values. Other users on the server have read access to the tmp directory, possibly allowing an attacker on the server to obtain confidential information from the buffer/tmp file, while it exists.
methods/https.cc in apt before 0.8.11 accepts connections when the certificate host name fails validation and Verify-Host is enabled, which allows man-in-the-middle attackers to obtain repository credentials via unspecified vectors.
The DH_check_pub_key function in crypto/dh/dh_check.c in OpenSSL 1.0.2 before 1.0.2f does not ensure that prime numbers are appropriate for Diffie-Hellman (DH) key exchange, which makes it easier for remote attackers to discover a private DH exponent by making multiple handshakes with a peer that chose an inappropriate number, as demonstrated by a number in an X9.42 file.
The Web Workers implementation in Google Chrome before 10.0.648.127 allows remote attackers to bypass the Same Origin Policy via unspecified vectors, related to an "error message leak."