A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.

A vulnerability in the Multi-Pod or Multi-Site network configurations for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to unexpectedly restart the device, resulting in a denial of service (DoS) condition. This vulnerability exists because TCP traffic sent to a specific port on an affected device is not properly sanitized. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port that is listening on a public-facing IP address for the Multi-Pod or Multi-Site configuration. A successful exploit could allow the attacker to cause the device to restart unexpectedly, resulting in a DoS condition.

A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Cisco ONS 15454 System Software 10.30 and 10.301 allows remote attackers to cause a denial of service (tNetTask CPU consumption or card reset) via a flood of (1) IP or (2) Ethernet traffic, aka Bug ID CSCus57263.

A vulnerability in Address Resolution Protocol (ARP) management of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent an affected device from resolving ARP entries for legitimate hosts on the connected subnets. This vulnerability exists because ARP entries are mismanaged. An attacker could exploit this vulnerability by continuously sending traffic that results in incomplete ARP entries. A successful exploit could allow the attacker to cause ARP requests on the device to be unsuccessful for legitimate hosts, resulting in a denial of service (DoS) condition.

A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544.

A vulnerability in the Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) certificate validation during EAP authentication for the Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the ISE application server to restart unexpectedly, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incomplete input validation of the client EAP-TLS certificate. An attacker could exploit this vulnerability by initiating EAP authentication over TLS to the ISE with a crafted EAP-TLS certificate. A successful exploit could allow the attacker to restart the ISE application server, resulting in a DoS condition on the affected system. The ISE application could continue to restart while the client attempts to establish the EAP authentication connection. If an attacker attempted to import the same EAP-TLS certificate to the ISE trust store, it could trigger a DoS condition on the affected system. This exploit vector would require the attacker to have valid administrator credentials. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance. Cisco Bug IDs: CSCve31857.

A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause one of the detection engine processes to run out of memory and thus slow down traffic processing. The vulnerability is due to improper handling of traffic when the Secure Sockets Layer (SSL) inspection policy is enabled. An attacker could exploit this vulnerability by sending malicious traffic through an affected device. An exploit could allow the attacker to increase the resource consumption of a single instance of the Snort detection engine on an affected device. This will lead to performance degradation and eventually the restart of the affected Snort process. Cisco Bug IDs: CSCvi09219, CSCvi29845.

A vulnerability in the Server Message Block Version 2 (SMBv2) and Version 3 (SMBv3) protocol implementation for the Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the device to run low on system memory, possibly preventing the device from forwarding traffic. It is also possible that a manual reload of the device may be required to clear the condition. The vulnerability is due to incorrect SMB header validation. An attacker could exploit this vulnerability by sending a custom SMB file transfer through the targeted device. A successful exploit could cause the device to consume an excessive amount of system memory and prevent the SNORT process from forwarding network traffic. This vulnerability can be exploited using either IPv4 or IPv6 in combination with SMBv2 or SMBv3 network traffic.

A vulnerability in TCP connection management in Cisco Prime Access Registrar could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the application unexpectedly restarts. The vulnerability is due to incorrect handling of incoming TCP SYN packets to specific listening ports. The improper handling of the TCP SYN packets could cause a system file description to be allocated and not freed. An attacker could exploit this vulnerability by sending a crafted stream of TCP SYN packets to the application. A successful exploit could allow the attacker to cause the application to eventually restart if a file description cannot be obtained.

A vulnerability in the TCP throttling process of Cisco Prime Network could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection for TCP listening ports. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP SYN packets to the local IP address of the targeted application. A successful exploit could allow the attacker to cause the device to consume a high amount of memory and become slow, or to stop accepting new TCP connections to the application. Cisco Bug IDs: CSCvg48152.

A vulnerability in the web portal of the Cisco Prime Collaboration Provisioning Tool could allow an unauthenticated, remote attacker to create a denial of service (DoS) condition for individual users. The vulnerability is due to weak login controls. An attacker could exploit this vulnerability by using a brute-force attack (Repeated Bad Login Attempts). A successful exploit could allow the attacker to restrict user access. Manual administrative intervention is required to restore access. Cisco Bug IDs: CSCvd07264.

A vulnerability in the application server of the Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to malformed SIP INVITE traffic received on the CVP during communications with the Cisco Virtualized Voice Browser (VVB). An attacker could exploit this vulnerability by sending malformed SIP INVITE traffic to the targeted appliance. An exploit could allow the attacker to impact the availability of services and data on the device, causing a DoS condition. This vulnerability affects Cisco Unified CVP running any software release prior to 11.6(1). Cisco Bug IDs: CSCve85840.

Cisco ONS 15454 controller cards with software 9.6 and earlier allow remote attackers to cause a denial of service (card reset) via a TCP FIN attack that triggers file-descriptor exhaustion and a failure to open a CAL pipe, aka Bug ID CSCug97348.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to force a NULL pointer dereference and cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69966, CSCve02435, CSCve04859, CSCve41590, CSCve41593, CSCve41601.

A vulnerability in the forwarding information base (FIB) code of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause inconsistency between the routing information base (RIB) and the FIB, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of extremely long routing updates. An attacker could exploit this vulnerability by sending a large routing update. A successful exploit could allow the attacker to trigger inconsistency between the FIB and the RIB, resulting in a DoS condition. Cisco Bug IDs: CSCus84718.

A vulnerability in the Precision Time Protocol (PTP) subsystem of Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of the Precision Time Protocol. The vulnerability is due to insufficient processing of PTP packets. An attacker could exploit this vulnerability by sending a custom PTP packet to, or through, an affected device. A successful exploit could allow the attacker to cause a DoS condition for the PTP subsystem, resulting in time synchronization issues across the network.

A vulnerability in Multicast Source Discovery Protocol (MSDP) ingress packet processing for Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the MSDP session to be unexpectedly reset, causing a short denial of service (DoS) condition. The MSDP session will restart within a few seconds. More Information: CSCvd94828. Known Affected Releases: 4.3.2.MCAST 6.0.2.BASE. Known Fixed Releases: 6.3.1.19i.MCAST 6.2.3.1i.MCAST 6.2.2.17i.MCAST 6.1.4.12i.MCAST.

A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803.

A vulnerability in the Trust Verification Service (TVS) of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) traffic by the affected software. An attacker could exploit this vulnerability by generating incomplete traffic streams. A successful exploit could allow the attacker to deny access to the TVS for an affected device, resulting in a DoS condition, until an administrator restarts the service. Known Affected Releases 10.0(1.10000.24) 10.5(2.10000.5) 11.0(1.10000.10) 9.1(2.10000.28). Cisco Bug IDs: CSCux21905.

A vulnerability in Google-defined remote procedure call (gRPC) handling in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Event Management Service daemon (emsd) to crash due to a system memory leak, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco IOS XR Software with gRPC enabled. More Information: CSCvb14433. Known Affected Releases: 6.1.1.BASE 6.2.1.BASE. Known Fixed Releases: 6.2.1.22i.MGBL 6.1.22.9i.MGBL 6.1.21.12i.MGBL 6.1.2.13i.MGBL.

A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the RADIUS feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by attempting to authenticate to a network or a service where the access server is using Cisco ISE as the RADIUS server. A successful exploit could allow the attacker to cause Cisco ISE to stop processing RADIUS requests, causing authentication/authorization timeouts, which would then result in legitimate requests being denied access. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) is required. See the Details section for more information.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states.

A vulnerability in the Protocol Independent Multicast (PIM) feature for IPv6 networks (PIM6) of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper error handling when processing inbound PIM6 packets. An attacker could exploit this vulnerability by sending multiple crafted PIM6 packets to an affected device. A successful exploit could allow the attacker to cause the PIM6 application to leak system memory. Over time, this memory leak could cause the PIM6 application to stop processing legitimate PIM6 traffic, leading to a DoS condition on the affected device.

A vulnerability in the SSL/TLS session handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak when closing SSL/TLS connections in a specific state. An attacker could exploit this vulnerability by establishing several SSL/TLS sessions and ensuring they are closed under certain conditions. A successful exploit could allow the attacker to exhaust memory resources in the affected device, which would prevent it from processing new SSL/TLS connections, resulting in a DoS. Manual intervention is required to recover an affected device.

A vulnerability in the licensing service of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.The vulnerability is due to improper handling of system resource values by the affected system. An attacker could exploit this vulnerability by sending malicious requests to the targeted system. A successful exploit could allow the attacker to cause the affected system to become unresponsive, resulting in a DoS condition and preventing the management of dependent devices.

A vulnerability in the OSPF Version 2 (OSPFv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation when the affected software processes certain OSPFv2 packets with Link-Local Signaling (LLS) data. An attacker could exploit this vulnerability by sending a malformed OSPFv2 packet to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.

A vulnerability in the SSL VPN negotiation process for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to inefficient direct memory access (DMA) memory management during the negotiation phase of an SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted Datagram TLS (DTLS) traffic to an affected device. A successful exploit could allow the attacker to exhaust DMA memory on the device and cause a DoS condition.

A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Firepower Threat Defense (FTD) Software when running on the Cisco Firepower 1000 Series platform could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to a communication error between internal functions. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause a buffer underrun, which leads to a crash. The crash causes the affected device to reload.

A vulnerability in the 802.11 Generic Advertisement Service (GAS) frame processing function of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS). The vulnerability is due to incomplete input validation of the 802.11 GAS frames that are processed by an affected device. An attacker could exploit this vulnerability by sending a crafted 802.11 GAS frame over the air to an access point (AP), and that frame would then be relayed to the affected WLC. Also, an attacker with Layer 3 connectivity to the WLC could exploit this vulnerability by sending a malicious 802.11 GAS payload in a Control and Provisioning of Wireless Access Points (CAPWAP) packet to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS.

Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.

A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default.

Buffer overflow in Cisco 7xx routers through the telnet service.

A vulnerability in the IPsec packet processor of Cisco IOS XR Software could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition for IPsec sessions to an affected device. The vulnerability is due to improper handling of packets by the IPsec packet processor. An attacker could exploit this vulnerability by sending malicious ICMP error messages to an affected device that get punted to the IPsec packet processor. A successful exploit could allow the attacker to deplete IPsec memory, resulting in all future IPsec packets to an affected device being dropped by the device. Manual intervention is required to recover from this situation.

A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust memory resources on the affected device, leading to a denial of service (DoS) condition. The vulnerability is due to improper resource management for inbound SSL/TLS connections. An attacker could exploit this vulnerability by establishing multiple SSL/TLS connections with specific conditions to the affected device. A successful exploit could allow the attacker to exhaust the memory on the affected device, causing the device to stop accepting new SSL/TLS connections and resulting in a DoS condition for services on the device that process SSL/TLS traffic. Manual intervention is required to recover an affected device.

A Denial of Service vulnerability in the Telnet remote login functionality of Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a Telnet process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCux46778. Known Affected Releases: 7.0(3)I3(0.170). Known Fixed Releases: 7.0(3)I3(1) 7.0(3)I3(0.257) 7.0(3)I3(0.255) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1).

A vulnerability in the IPsec component of Cisco StarOS for Cisco ASR 5000 Series Routers could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from establishing, resulting in a denial of service (DoS) condition. Affected Products: ASR 5000 Series Routers, Virtualized Packet Core (VPC) Software. More Information: CSCvc21129. Known Affected Releases: 21.1.0 21.1.M0.65601 21.1.v0. Known Fixed Releases: 21.2.A0.65754 21.1.b0.66164 21.1.V0.66014 21.1.R0.65759 21.1.M0.65749 21.1.0.66030 21.1.0.

Cisco Content Security Management Appliance (SMA) 7.8.0-000 does not properly validate credentials, which allows remote attackers to cause a denial of service (rapid log-file rollover and application fault) via crafted HTTP requests, aka Bug ID CSCuw09620.

A vulnerability in the local malware analysis process of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to insufficient error handling in the local malware analysis process of an affected device. An attacker could exploit this vulnerability by sending a crafted file through the device. A successful exploit could allow the attacker to cause the local malware analysis process to crash, which could result in a DoS condition. Notes: Manual intervention may be required to recover from this situation. Malware cloud lookup and dynamic analysis will not be impacted.

A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.

A vulnerability in the TCP/IP stack of Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), and Cisco Secure Email and Web Manager, formerly Security Management Appliance, could allow an unauthenticated, remote attacker to crash the Simple Network Management Protocol (SNMP) service, resulting in a denial of service (DoS) condition. This vulnerability is due to an open port listener on TCP port 199. An attacker could exploit this vulnerability by connecting to TCP port 199. A successful exploit could allow the attacker to crash the SNMP service, resulting in a DoS condition.

Unspecified vulnerability in an unspecified Microsoft API, as used by Cisco Unity and possibly other products, allows remote attackers to cause a denial of service by sending crafted packets to dynamic UDP ports, related to a "processing error."

The firewall subsystem in Cisco Identity Services Engine has an incorrect rule for open ports, which allows remote attackers to cause a denial of service (CPU consumption or process crash) via a flood of malformed IP packets, aka Bug ID CSCug94572.

dnsserver in Cisco Application Control Engine Global Site Selector (GSS) before 3.0(1) allows remote attackers to cause a denial of service (daemon crash) via a series of crafted DNS requests, aka Bug ID CSCsj70093.

The ITM web server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (temporary HTTP service outage) via a flood of TCP packets, aka Bug ID CSCuh36313.

The Java process in the Impact server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (process crash) via a flood of TCP packets, aka Bug ID CSCug57345.

Cisco NX-OS 5.0 and earlier on MDS 9000 devices allows remote attackers to cause a denial of service (supervisor CPU consumption) via Authentication Header (AH) authentication in a Virtual Router Redundancy Protocol (VRRP) frame, aka Bug ID CSCte27874.