A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process.

A vulnerability in the Cisco application-hosting framework (CAF) component of the Cisco IOx application environment could allow an authenticated, remote attacker to write or modify arbitrary files in the virtual instance running on the affected device. The vulnerability is due to insufficient input validation of user-supplied application packages. An attacker who can upload a malicious package within Cisco IOx could exploit the vulnerability to modify arbitrary files. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52317.

Cisco IOS 15.0 and 15.1 and IOS XE 3.x do not properly handle the "set mpls experimental imposition" command, which allows remote attackers to cause a denial of service (device crash) via network traffic that triggers (1) fragmentation or (2) reassembly, aka Bug ID CSCtr56576.

The DSP card on Cisco TelePresence MCU 4500 and 4501 devices before 4.3(2.30), TelePresence MCU MSE 8510 devices before 4.3(2.30), and TelePresence Server before 2.3(1.55) does not properly validate H.264 data, which allows remote attackers to cause a denial of service (device reload) via crafted RTP packets in a (1) SIP session or (2) H.323 session, aka Bug IDs CSCuc11328 and CSCub05448.

Cisco Unified Contact Center Express (aka CCX) 8.0 and 8.5 allows remote attackers to cause a denial of service via network traffic, as demonstrated by an SEC-BE-STABLE test case, aka Bug ID CSCth33834.

Cisco NX-OS on the Nexus 7000, when a certain Overlay Transport Virtualization (OTV) configuration is used, allows remote attackers to cause a denial of service (M1-Series module reload) via crafted packets, aka Bug ID CSCud15673.

The HTTP client in Cisco IOS 12.4 and 15.0 allows user-assisted remote attackers to cause a denial of service (device crash) via a malformed HTTP response to a request for service installation, aka Bug ID CSCts12249.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336.

The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.5.3041, and 3.0.x before 3.0.629, on Linux and Mac OS X downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a Java applet, aka Bug ID CSCsy05934.

Cisco IOS Unified Border Element (CUBE) in Cisco IOS before 15.3(2)T allows remote authenticated users to cause a denial of service (input queue wedge) via a crafted series of RTCP packets, aka Bug ID CSCuc42518.

Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779.

Cisco Adaptive Security Appliances (ASA) devices with firmware 8.4 do not properly validate unspecified input related to UNC share pathnames, which allows remote authenticated users to cause a denial of service (device crash) via unknown vectors, aka Bug ID CSCuc65775.

Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects.

The kernel in Cisco Native Unix (CNU) on Cisco Unified IP Phone 7900 series devices (aka TNP phones) with software before 9.3.1-ES10 does not properly validate unspecified system calls, which allows attackers to execute arbitrary code or cause a denial of service (memory overwrite) via a crafted binary.

The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.3.185 on Windows, and on Windows Mobile, downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a certain ActiveX control in vpnweb.ocx, aka Bug ID CSCsy00904.

The management interface in the Central Software component in Cisco Unified Computing System (UCS) does not properly validate the identity of vCenter consoles, which allows man-in-the-middle attackers to read or modify an inter-device data stream by spoofing an identity, aka Bug ID CSCtk00683.

The DHCPv6 server in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x, 3.1.xS before 3.1.4S, 3.1.xSG and 3.2.xSG before 3.2.5SG, 3.2.xS, 3.2.xXO, 3.3.xS, and 3.3.xSG before 3.3.1SG allows remote attackers to cause a denial of service (device reload) via a malformed DHCPv6 packet, aka Bug ID CSCto57723.

The local file editor in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges, and read or modify arbitrary files, via unspecified key bindings, aka Bug ID CSCtn04521.

The fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (component crash) via crafted "debug hardware" parameters, aka Bug ID CSCtq86468.

Cisco NX-OS allows local users to gain privileges and execute arbitrary commands via shell metacharacters in a command that calls the system library function, aka Bug IDs CSCtf23559 and CSCtf27780.

MCTools in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to gain privileges by entering crafted command-line parameters on a Fabric Interconnect device, aka Bug ID CSCtg20749.

A certain ActiveX control in CSDWebInstaller.ocx in Cisco Secure Desktop (CSD) does not properly verify the signature of an unspecified downloaded program, which allows remote attackers to execute arbitrary code by spoofing the CSD installation process, a different vulnerability than CVE-2010-0589.

The BGP implementation in Cisco IOS 15.2, IOS XE 3.5.xS before 3.5.2S, and IOS XR 4.1.0 through 4.2.2 allows remote attackers to cause a denial of service (multiple connection resets) by leveraging a peer relationship and sending a malformed attribute, aka Bug IDs CSCtt35379, CSCty58300, CSCtz63248, and CSCtz62914.

The CSDWebInstallerCtrl ActiveX control in CSDWebInstaller.ocx in Cisco Secure Desktop (CSD) allows remote attackers to download an unintended Cisco program onto a client machine, and execute this program, by identifying a Cisco program with a Cisco digital signature and then renaming this program to inst.exe, a different vulnerability than CVE-2010-0589 and CVE-2011-0926.

The Manager component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service via an invalid Smart Call Home contact address, aka Bug ID CSCtl00186.

Cisco PIX firewall 5.x.x, and 6.3.1 and earlier, allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set.

Cisco IOS 11.x and 12.0 through 12.2 allows remote attackers to cause a denial of service (traffic block) by sending a particular sequence of IPv4 packets to an interface on the device, causing the input queue on that interface to be marked as full.

The activate firmware command in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq02600.

A vulnerability in Cisco WebEx Meeting Center could allow an authenticated, remote attacker to initiate connections to arbitrary hosts, aka a "URL Redirection Vulnerability." The vulnerability is due to insufficient access control for HTTP traffic directed to the Cisco WebEx Meeting Center. An attacker could exploit this vulnerability by sending a malicious URL to the Cisco WebEx Meeting Center. An exploit could allow the attacker to connect to arbitrary hosts. Cisco Bug IDs: CSCvf63843.

Cisco IOS before 15.0(1)XA1, when certain TFTP debugging is enabled, allows remote attackers to cause a denial of service (device crash) via a TFTP copy over IPv6, aka Bug ID CSCtb28877.

The Cisco Optical Service Module (OSM) for the Catalyst 6500 and 7600 series running Cisco IOS 12.1(8)E through 12.1(13.4)E allows remote attackers to cause a denial of service (hang) via a malformed packet.

Cisco IOS before 15.1(1)SY, when Multicast Listener Discovery (MLD) snooping is enabled, allows remote attackers to cause a denial of service (CPU consumption or device crash) via MLD packets on a network that contains many IPv6 hosts, aka Bug ID CSCtr88193.

Multiple SSH2 servers and clients do not properly handle lists with empty elements or strings, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle large packets or large fields, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code via buffer overflow attacks, as demonstrated by the SSHredder SSH protocol test suite.

The HostScan downloader implementation in Cisco AnyConnect Secure Mobility Client 3.x before 3.0 MR8 and Cisco Secure Desktop before 3.6.6020 does not compare the timestamp of offered software to the timestamp of installed software, which allows remote attackers to force a version downgrade by using (1) ActiveX or (2) Java components to offer signed code that corresponds to an older software release, aka Bug ID CSCtx74235.

Multiple SSH2 servers and clients do not properly handle strings with null characters in them when the string length is specified by a length field, which could allow remote attackers to cause a denial of service or possibly execute arbitrary code due to interactions with the use of null-terminated strings as implemented using languages such as C, as demonstrated by the SSHredder SSH protocol test suite.

STCAPP (aka the SCCP telephony control application) on Cisco IOS before 15.0(1)XA1 does not properly handle multiple calls to a shared line, which allows remote attackers to cause a denial of service (port hang) by simultaneously ending two calls that were controlled by CallManager Express (CME), aka Bug ID CSCtd42552.

A vulnerability in the normalization functionality of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to insufficient normalization of a text-based payload. An attacker could exploit this vulnerability by sending traffic that contains specifically obfuscated payloads through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious payloads to protected systems that would otherwise be blocked.

Cisco VPN 3000 series concentrators before 2.5.2(F) allow remote attackers to cause a denial of service via a flood of invalid login requests to (1) the SSL service, or (2) the telnet service, which do not properly disconnect the user after several failed login attempts.

Cisco IronPort Web Security Appliance up to and including 7.5 does not validate the basic constraints of the certificate authority which could lead to MITM attacks

Cisco Catalyst 2900XL switch allows a remote attacker to create a denial of service via an empty UDP packet sent to port 161 (SNMP) when SNMP is disabled.

The IOS HTTP service in Cisco routers and switches running IOS 11.1 through 12.1 allows remote attackers to cause a denial of service by requesting a URL that contains a %% string.

CRLF injection vulnerability in /+CSCOE+/logon.html on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.0 through 8.4 allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via unspecified vectors, aka Bug ID CSCth63101.

Cisco IOS 15.2S allows remote attackers to cause a denial of service (interface queue wedge) via malformed UDP traffic on port 465, aka Bug ID CSCts48300.

Multiple vulnerabilities in the smart tunnel functionality of Cisco Adaptive Security Appliance (ASA) could allow an authenticated, local attacker to elevate privileges to the root user or load a malicious library file while the tunnel is being established. For more information about these vulnerabilities, see the Details section of this security advisory.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

A vulnerability in the email message scanning of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass configured filters on the device. The vulnerability is due to improper input validation of certain email fields. An attacker could exploit this vulnerability by sending a crafted email message to a recipient protected by the ESA. A successful exploit could allow the attacker to bypass configured message filters and inject arbitrary scripting code inside the email body. The malicious code is not executed by default unless the recipient's email client is configured to execute scripts contained in emails.