Perl module Data::UUID from CPAN version 1.219 vulnerable to symlink attacks

In calc_vm_may_flags of ashmem.c, there is a possible arbitrary write to shared memory due to a permissions bypass. This could lead to local escalation of privilege by corrupting memory shared between processes, with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-142938932

pithos before 0.3.5 allows overwrite of arbitrary files via symlinks.

An issue was discovered in the Linux kernel before 5.0.6. In rx_queue_add_kobject() and netdev_queue_add_kobject() in net/core/net-sysfs.c, a reference count is mishandled, aka CID-a3e23f719f5c.

The (1) getRule and (2) getChains functions in server/rules.cpp in fireflierd (fireflier-server) in FireFlier 1.1.6 allow local users to overwrite arbitrary files via a symlink attack on the /tmp/fireflier.rules temporary file.

linki.py in ekg 2005-06-05 and earlier allows local users to overwrite or create arbitrary files via a symlink attack on temporary files.

arch/arm64/kvm/guest.c in KVM in the Linux kernel before 4.18.12 on the arm64 platform mishandles the KVM_SET_ON_REG ioctl. This is exploitable by attackers who can create virtual machines. An attacker can arbitrarily redirect the hypervisor flow of control (with full register control). An attacker can also cause a denial of service (hypervisor panic) via an illegal exception return. This occurs because of insufficient restrictions on userspace access to the core register file, and because PSTATE.M validation does not prevent unintended execution modes.

A flaw was found in the Linux kernel's TUN/TAP functionality. This issue could allow a local user to bypass network filters and gain unauthorized access to some resources. The original patches fixing CVE-2023-1076 are incorrect or incomplete. The problem is that the following upstream commits - a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid"), - 66b2c338adce ("tap: tap_open(): correctly initialize socket uid"), pass "inode->i_uid" to sock_init_data_uid() as the last parameter and that turns out to not be accurate.

Munin before 2.999.6 has a local file write vulnerability when CGI graphs are enabled. Setting multiple upper_limit GET parameters allows overwriting any file accessible to the www-data user.

The changelog command in Apt before 1.0.9.2 allows local users to write to arbitrary files via a symlink attack on the changelog file.

fusermount in FUSE before 2.9.3-15 does not properly clear the environment before invoking (1) mount or (2) umount as root, which allows local users to write to arbitrary files via a crafted LIBMOUNT_MTAB environment variable that is used by mount's debugging feature.

logol 1.5.0 uses world writable permissions for the /var/lib/logol/results directory, which allows local users to delete or overwrite arbitrary files.

foomatic-rip filter, all versions, used insecurely creates temporary files for storage of PostScript data by rendering the data when the debug mode was enabled. This flaw may be exploited by a local attacker to conduct symlink attacks by overwriting arbitrary files accessible with the privileges of the user running the foomatic-rip universal print filter.

foomatic-rip filter v4.0.12 and prior used insecurely creates temporary files for storage of PostScript data by rendering the data when the debug mode was enabled. This flaw may be exploited by a local attacker to conduct symlink attacks by overwriting arbitrary files accessible with the privileges of the user running the foomatic-rip universal print filter.

paxtest handles temporary files insecurely

init in initramfs-tools 0.92f allows local users to overwrite arbitrary files via a symlink attack on the /tmp/initramfs.debug temporary file. NOTE: the vendor disputes this vulnerability, stating that "init is [used in] a single-user context; there's no possibility that this is exploitable.

The Debian pg_ctlcluster, pg_createcluster, and pg_upgradecluster scripts, as distributed in the Debian postgresql-common package before 181+deb9u1 for PostgreSQL (and other packages related to Debian and Ubuntu), handled symbolic links insecurely, which could result in local denial of service by overwriting arbitrary files.

A vulnerability in the endpoint software of Cisco AMP for Endpoints and Clam AntiVirus could allow an authenticated, local attacker to cause the running software to delete arbitrary files on the system. The vulnerability is due to a race condition that could occur when scanning malicious files. An attacker with local shell access could exploit this vulnerability by executing a script that could trigger the race condition. A successful exploit could allow the attacker to delete arbitrary files on the system that the attacker would not normally have privileges to delete, producing system instability or causing the endpoint software to stop working.

A missing CAP_NET_RAW check in NFC socket creation in net/nfc/rawsock.c in the Linux kernel before 5.8.2 could be used by local attackers to create raw sockets, bypassing security mechanisms, aka CID-26896f01467a.

In the Linux kernel through 5.8.7, local attackers able to inject conntrack netlink configuration could overflow a local buffer, causing crashes or triggering use of incorrect protocol numbers in ctnetlink_parse_tuple_filter in net/netfilter/nf_conntrack_netlink.c, aka CID-1cc5ef91d2ff.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: set dormant flag on hook register failure We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core.

A buffer overflow was found in perl-DBI < 1.643 in DBI.xs. A local attacker who is able to supply a string longer than 300 characters could cause an out-of-bounds write, affecting the availability of the service or integrity of data.

A flaw was found in Ansible Engine, all versions 2.7.x, 2.8.x and 2.9.x prior to 2.7.17, 2.8.9 and 2.9.6 respectively, when using ansible_facts as a subkey of itself and promoting it to a variable when inject is enabled, overwriting the ansible_facts after the clean. An attacker could take advantage of this by altering the ansible_facts, such as ansible_hosts, users and any other key data which would lead into privilege escalation or code injection.

The Web Notification API in Mozilla Firefox before 29.0, Firefox ESR 24.x before 24.5, Thunderbird before 24.5, and SeaMonkey before 2.26 allows remote attackers to bypass intended source-component restrictions and execute arbitrary JavaScript code in a privileged context via a crafted web page for which Notification.permission is granted.

Mozilla Firefox before 28.0, Firefox ESR 24.x before 24.4, Thunderbird before 24.4, and SeaMonkey before 2.25 allow remote attackers to bypass the popup blocker via unspecified vectors.

The Crypto API in the Linux kernel before 3.18.5 allows local users to load arbitrary kernel modules via a bind system call for an AF_ALG socket with a module name in the salg_name field, a different vulnerability than CVE-2014-9644.

The scipy.weave component in SciPy before 0.12.1 creates insecure temporary directories.

An issue was discovered in Xen through 4.14.x. The PCI passthrough code improperly uses register data. Code paths in Xen's MSI handling have been identified that act on unsanitized values read back from device hardware registers. While devices strictly compliant with PCI specifications shouldn't be able to affect these registers, experience shows that it's very common for devices to have out-of-spec "backdoor" operations that can affect the result of these reads. A not fully trusted guest may be able to crash Xen, leading to a Denial of Service (DoS) for the entire system. Privilege escalation and information leaks cannot be excluded. All versions of Xen supporting PCI passthrough are affected. Only x86 systems are vulnerable. Arm systems are not vulnerable. Only guests with passed through PCI devices may be able to leverage the vulnerability. Only systems passing through devices with out-of-spec ("backdoor") functionality can cause issues. Experience shows that such out-of-spec functionality is common; unless you have reason to believe that your device does not have such functionality, it's better to assume that it does.

multipath-tools 0.7.0 through 0.9.x before 0.9.2 allows local users to obtain root access, as exploited alone or in conjunction with CVE-2022-41973. Local users able to write to UNIX domain sockets can bypass access controls and manipulate the multipath setup. This can lead to local privilege escalation to root. This occurs because an attacker can repeat a keyword, which is mishandled because arithmetic ADD is used instead of bitwise OR.

A flaw was found in the way qemu v1.3.0 and later (virtio-rng) validates addresses when guest accesses the config space of a virtio device. If the virtio device has zero/small sized config space, such as virtio-rng, a privileged guest user could use this flaw to access the matching host's qemu address space and thus increase their privileges on the host.

Jupyter Core is a package for the core common functionality of Jupyter projects. Jupyter Core prior to version 4.11.2 contains an arbitrary code execution vulnerability in `jupyter_core` that stems from `jupyter_core` executing untrusted files in CWD. This vulnerability allows one user to run code as another. Version 4.11.2 contains a patch for this issue. There are no known workarounds.

A Security Bypass vulnerability exists in the phpCAS 1.2.2 library from the jasig project due to the way proxying of services are managed.

The AX.25 daemon (ax25d) in ax25-tools before 0.0.8-13 does not check the return value of a setuid call. The setuid call is responsible for dropping privileges but if the call fails the daemon would continue to run with root privileges which can allow possible privilege escalation.

UC-8100A-ME-T System Image: Versions v1.0 to v1.6, UC-2100 System Image: Versions v1.0 to v1.12, UC-2100-W System Image: Versions v1.0 to v 1.12,&nbsp;UC-3100 System Image: Versions v1.0 to v1.6,&nbsp;UC-5100 System Image: Versions v1.0 to v1.4, UC-8100 System Image: Versions v3.0 to v3.5, UC-8100-ME-T System Image: Versions v3.0 and v3.1, UC-8200 System Image: v1.0 to v1.5, AIG-300 System Image: v1.0 to v1.4, UC-8410A with Debian 9 System Image: Versions v4.0.2 and v4.1.2, UC-8580 with Debian 9 System Image: Versions v2.0 and v2.1, UC-8540 with Debian 9 System Image: Versions v2.0 and v2.1, and DA-662C-16-LX (GLB) System Image: Versions v1.0.2 to v1.1.2 of Moxa's ARM-based computers have an execution with unnecessary privileges vulnerability, which could allow an attacker with user-level privileges to gain root privileges.

VMware Tools (12.0.0, 11.x.y and 10.x.y) contains a local privilege escalation vulnerability. A malicious actor with local non-administrative access to the Guest OS can escalate privileges as a root user in the virtual machine.

In ConsoleKit before 0.4.2, an intended security policy restriction bypass was found. This flaw allows an authenticated system user to escalate their privileges by initiating a remote VNC session.

net/netfilter/nf_dup_netdev.c in the Linux kernel 5.4 through 5.6.10 allows local users to gain privileges because of a heap out-of-bounds write. This is related to nf_tables_offload.

Insufficient policy enforcement in navigation in Google Chrome prior to 79.0.3945.79 allowed a remote attacker to bypass site isolation via a crafted HTML page.

IPython (Interactive Python) is a command shell for interactive computing in multiple programming languages, originally developed for the Python programming language. Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine. All users are advised to upgrade.

The do_change_type function in fs/namespace.c in the Linux kernel before 2.6.22 does not verify that the caller has the CAP_SYS_ADMIN capability, which allows local users to gain privileges or cause a denial of service by modifying the properties of a mountpoint.

Logic error in the SID/Name translation functionality in smbd in Samba 3.0.23d through 3.0.25pre2 allows local users to gain temporary privileges and execute SMB/CIFS protocol operations via unspecified vectors that cause the daemon to transition to the root user.

Lack of access control checks in Instrumentation in Google Chrome prior to 65.0.3325.146 allowed a remote attacker who had compromised the renderer process to obtain memory metadata from privileged processes .

A malicious devtools extension could have been used to escalate privileges. This vulnerability affects Firefox < 122, Firefox ESR < 115.7, and Thunderbird < 115.7.

In the Linux kernel, the following vulnerability has been resolved: ptrace: slightly saner 'get_dumpable()' logic The 'dumpability' of a task is fundamentally about the memory image of the task - the concept comes from whether it can core dump or not - and makes no sense when you don't have an associated mm. And almost all users do in fact use it only for the case where the task has a mm pointer. But we have one odd special case: ptrace_may_access() uses 'dumpable' to check various other things entirely independently of the MM (typically explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for threads that no longer have a VM (and maybe never did, like most kernel threads). It's not what this flag was designed for, but it is what it is. The ptrace code does check that the uid/gid matches, so you do have to be uid-0 to see kernel thread details, but this means that the traditional "drop capabilities" model doesn't make any difference for this all. Make it all make a *bit* more sense by saying that if you don't have a MM pointer, we'll use a cached "last dumpability" flag if the thread ever had a MM (it will be zero for kernel threads since it is never set), and require a proper CAP_SYS_PTRACE capability to override.

Inappropriate allowance of the setDownloadBehavior devtools protocol feature in Extensions in Google Chrome prior to 71.0.3578.80 allowed a remote attacker with control of an installed extension to access files on the local file system via a crafted Chrome Extension.

Thunderbird unexpectedly enabled JavaScript in the composition area. The JavaScript execution context was limited to this area and did not receive chrome-level privileges, but could be used as a stepping stone to further an attack with other vulnerabilities. This vulnerability affects Thunderbird < 91.4.0.

Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.12.3 and 1.10.6, Flatpak doesn't properly validate that the permissions displayed to the user for an app at install time match the actual permissions granted to the app at runtime, in the case that there's a null byte in the metadata file of an app. Therefore apps can grant themselves permissions without the consent of the user. Flatpak shows permissions to the user during install by reading them from the "xa.metadata" key in the commit metadata. This cannot contain a null terminator, because it is an untrusted GVariant. Flatpak compares these permissions to the *actual* metadata, from the "metadata" file to ensure it wasn't lied to. However, the actual metadata contents are loaded in several places where they are read as simple C-style strings. That means that, if the metadata file includes a null terminator, only the content of the file from *before* the terminator gets compared to xa.metadata. Thus, any permissions that appear in the metadata file after a null terminator are applied at runtime but not shown to the user. So maliciously crafted apps can give themselves hidden permissions. Users who have Flatpaks installed from untrusted sources are at risk in case the Flatpak has a maliciously crafted metadata file, either initially or in an update. This issue is patched in versions 1.12.3 and 1.10.6. As a workaround, users can manually check the permissions of installed apps by checking the metadata file or the xa.metadata key on the commit metadata.

The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID.

systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the "systemctl status" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.