The scipy.weave component in SciPy before 0.12.1 creates insecure temporary directories.

gksu-polkit-0.0.3-6.fc18 was reported as fixing the issue in CVE-2012-5617 but the patch was improperly applied and it did not fixed the security issue.

A flaw was found in the way qemu v1.3.0 and later (virtio-rng) validates addresses when guest accesses the config space of a virtio device. If the virtio device has zero/small sized config space, such as virtio-rng, a privileged guest user could use this flaw to access the matching host's qemu address space and thus increase their privileges on the host.

The pg_ctlcluster script in postgresql-common in versions prior to 210 didn't drop privileges when creating socket/statistics temporary directories, which could result in local privilege escalation.

mom creates world-writable pid files in /var/run

A Privilege Escalation vulnerability exits in Fedoraproject Sectool due to an incorrect DBus file.

It was discovered that a systemd service that uses DynamicUser property can create a SUID/SGID binary that would be allowed to run as the transient service UID/GID even after the service is terminated. A local attacker may use this flaw to access resources that will be owned by a potentially different service in the future, when the UID/GID will be recycled.

multipath-tools 0.7.0 through 0.9.x before 0.9.2 allows local users to obtain root access, as exploited alone or in conjunction with CVE-2022-41973. Local users able to write to UNIX domain sockets can bypass access controls and manipulate the multipath setup. This can lead to local privilege escalation to root. This occurs because an attacker can repeat a keyword, which is mishandled because arithmetic ADD is used instead of bitwise OR.

systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the "systemctl status" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.

In Sudo before 1.9.12p2, the sudoedit (aka -e) feature mishandles extra arguments passed in the user-provided environment variables (SUDO_EDITOR, VISUAL, and EDITOR), allowing a local attacker to append arbitrary entries to the list of files to process. This can lead to privilege escalation. Affected versions are 1.8.0 through 1.9.12.p1. The problem exists because a user-specified editor may contain a "--" argument that defeats a protection mechanism, e.g., an EDITOR='vim -- /path/to/extra/file' value.

NuGet Client Elevation of Privilege Vulnerability

The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID.

VMware Tools (12.0.0, 11.x.y and 10.x.y) contains a local privilege escalation vulnerability. A malicious actor with local non-administrative access to the Guest OS can escalate privileges as a root user in the virtual machine.

UC-8100A-ME-T System Image: Versions v1.0 to v1.6, UC-2100 System Image: Versions v1.0 to v1.12, UC-2100-W System Image: Versions v1.0 to v 1.12, UC-3100 System Image: Versions v1.0 to v1.6, UC-5100 System Image: Versions v1.0 to v1.4, UC-8100 System Image: Versions v3.0 to v3.5, UC-8100-ME-T System Image: Versions v3.0 and v3.1, UC-8200 System Image: v1.0 to v1.5, AIG-300 System Image: v1.0 to v1.4, UC-8410A with Debian 9 System Image: Versions v4.0.2 and v4.1.2, UC-8580 with Debian 9 System Image: Versions v2.0 and v2.1, UC-8540 with Debian 9 System Image: Versions v2.0 and v2.1, and DA-662C-16-LX (GLB) System Image: Versions v1.0.2 to v1.1.2 of Moxa's ARM-based computers have an execution with unnecessary privileges vulnerability, which could allow an attacker with user-level privileges to gain root privileges.

A Privilege Context Switching issue was discovered in join.c in Firejail 0.9.68. By crafting a bogus Firejail container that is accepted by the Firejail setuid-root program as a join target, a local attacker can enter an environment in which the Linux user namespace is still the initial user namespace, the NO_NEW_PRIVS prctl is not activated, and the entered mount namespace is under the attacker's control. In this way, the filesystem layout can be adjusted to gain root privileges through execution of available setuid-root binaries such as su or sudo.

arch/x86/kernel/entry_64.S in the Linux kernel before 3.17.5 does not properly handle faults associated with the Stack Segment (SS) segment register, which allows local users to gain privileges by triggering an IRET instruction that leads to access to a GS Base address from the wrong space.

Sympa before 6.2.56 allows privilege escalation.

net/netfilter/nf_dup_netdev.c in the Linux kernel 5.4 through 5.6.10 allows local users to gain privileges because of a heap out-of-bounds write. This is related to nf_tables_offload.

The do_change_type function in fs/namespace.c in the Linux kernel before 2.6.22 does not verify that the caller has the CAP_SYS_ADMIN capability, which allows local users to gain privileges or cause a denial of service by modifying the properties of a mountpoint.

An issue was discovered in TrouSerS through 0.3.14. If the tcsd daemon is started with root privileges, the tss user still has read and write access to the /etc/tcsd.conf file (which contains various settings related to this daemon).

An issue was discovered in TrouSerS through 0.3.14. If the tcsd daemon is started with root privileges instead of by the tss user, it fails to drop the root gid privilege when no longer needed.

The Debian shadow package before 1:4.5-1 for Shadow incorrectly lists pts/0 and pts/1 as physical terminals in /etc/securetty. This allows local users to login as password-less users even if they are connected by non-physical means such as SSH (hence bypassing PAM's nullok_secure configuration). This notably affects environments such as virtual machines automatically generated with a default blank root password, allowing all local users to escalate privileges.

Sympa through 6.2.57b.2 allows a local privilege escalation from the sympa user account to full root access by modifying the sympa.conf configuration file (which is owned by sympa) and parsing it through the setuid sympa_newaliases-wrapper executable.

A flaw was found in the QEMU Guest Agent service for Windows. A local unprivileged user may be able to manipulate the QEMU Guest Agent's Windows installer via repair custom actions to elevate their privileges on the system.

Bubblewrap (bwrap) before version 0.4.1, if installed in setuid mode and the kernel supports unprivileged user namespaces, then the `bwrap --userns2` option can be used to make the setuid process keep running as root while being traceable. This can in turn be used to gain root permissions. Note that this only affects the combination of bubblewrap in setuid mode (which is typically used when unprivileged user namespaces are not supported) and the support of unprivileged user namespaces. Known to be affected are: * Debian testing/unstable, if unprivileged user namespaces enabled (not default) * Debian buster-backports, if unprivileged user namespaces enabled (not default) * Arch if using `linux-hardened`, if unprivileged user namespaces enabled (not default) * Centos 7 flatpak COPR, if unprivileged user namespaces enabled (not default) This has been fixed in the 0.4.1 release, and all affected users should update.

gksu-polkit: permissive PolicyKit policy configuration file allows privilege escalation

The sctp_v6_create_accept_sk function in net/sctp/ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890.

An issue was discovered in Cobbler before 3.3.1. In the templar.py file, the function check_for_invalid_imports can allow Cheetah code to import Python modules via the "#from MODULE import" substring. (Only lines beginning with #import are blocked.)

In __f2fs_setxattr in fs/f2fs/xattr.c in the Linux kernel through 5.15.11, there is an out-of-bounds memory access when an inode has an invalid last xattr entry.

Quick Emulator (Qemu) built with the VirtFS, host directory sharing via Plan 9 File System(9pfs) support, is vulnerable to an improper access control issue. It could occur while accessing virtfs metadata files in mapped-file security mode. A guest user could use this flaw to escalate their privileges inside guest.

The mm subsystem in the Linux kernel through 3.2 does not properly enforce the CONFIG_STRICT_DEVMEM protection mechanism, which allows local users to read or write to kernel memory locations in the first megabyte (and bypass slab-allocation access restrictions) via an application that opens the /dev/mem file, related to arch/x86/mm/init.c and drivers/char/mem.c.

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist.

dmcrypt-get-device, as shipped in the eject package of Debian and Ubuntu, does not check the return value of the (1) setuid or (2) setgid function, which might cause dmcrypt-get-device to execute code, which was intended to run as an unprivileged user, as root. This affects eject through 2.1.5+deb1+cvs20081104-13.1 on Debian, eject before 2.1.5+deb1+cvs20081104-13.1ubuntu0.16.10.1 on Ubuntu 16.10, eject before 2.1.5+deb1+cvs20081104-13.1ubuntu0.16.04.1 on Ubuntu 16.04 LTS, eject before 2.1.5+deb1+cvs20081104-13.1ubuntu0.14.04.1 on Ubuntu 14.04 LTS, and eject before 2.1.5+deb1+cvs20081104-9ubuntu0.1 on Ubuntu 12.04 LTS.

AIDE before 0.17.4 allows local users to obtain root privileges via crafted file metadata (such as XFS extended attributes or tmpfs ACLs), because of a heap-based buffer overflow.

UNIX Symbolic Link (Symlink) Following vulnerability in the packaging of privoxy on openSUSE Leap 15.1, Factory allows local attackers to escalate from user privoxy to root. This issue affects: openSUSE Leap 15.1 privoxy version 3.0.28-lp151.1.1 and prior versions. openSUSE Factory privoxy version 3.0.28-2.1 and prior versions.

An issue was discovered in these Pivotal RabbitMQ versions: all 3.4.x versions, all 3.5.x versions, and 3.6.x versions prior to 3.6.9; and these RabbitMQ for PCF versions: all 1.5.x versions, 1.6.x versions prior to 1.6.18, and 1.7.x versions prior to 1.7.15. RabbitMQ management UI stores signed-in user credentials in a browser's local storage without expiration, making it possible to retrieve them using a chained attack.

The do_shmat function in ipc/shm.c in the Linux kernel through 4.9.12 does not restrict the address calculated by a certain rounding operation, which allows local users to map page zero, and consequently bypass a protection mechanism that exists for the mmap system call, by making crafted shmget and shmat system calls in a privileged context.

Integer overflow in the check_offset function in b/wrestool/fileread.c in icoutils before 0.31.1 allows local users to cause a denial of service (process crash) and execute arbitrary code via a crafted executable.

Babel.Locale in Babel before 2.9.1 allows attackers to load arbitrary locale .dat files (containing serialized Python objects) via directory traversal, leading to code execution.

An exploitable code execution vulnerability exists in the ss-manager binary of Shadowsocks-libev 3.3.2. Specially crafted network packets sent to ss-manager can cause an arbitrary binary to run, resulting in code execution and privilege escalation. An attacker can send network packets to trigger this vulnerability.

An issue was discovered in net/ipv6/ip6mr.c in the Linux kernel before 4.11. By setting a specific socket option, an attacker can control a pointer in kernel land and cause an inet_csk_listen_stop general protection fault, or potentially execute arbitrary code under certain circumstances. The issue can be triggered as root (e.g., inside a default LXC container or with the CAP_NET_ADMIN capability) or after namespace unsharing. This occurs because sk_type and protocol are not checked in the appropriate part of the ip6_mroute_* functions. NOTE: this affects Linux distributions that use 4.9.x longterm kernels before 4.9.187.

An unprivileged write to the file handler flaw in the Linux kernel's control groups and namespaces subsystem was found in the way users have access to some less privileged process that are controlled by cgroups and have higher privileged parent process. It is actually both for cgroup2 and cgroup1 versions of control groups. A local user could use this flaw to crash the system or escalate their privileges on the system.

The HMAC implementation (crypto/hmac.c) in the Linux kernel before 4.14.8 does not validate that the underlying cryptographic hash algorithm is unkeyed, allowing a local attacker able to use the AF_ALG-based hash interface (CONFIG_CRYPTO_USER_API_HASH) and the SHA-3 hash algorithm (CONFIG_CRYPTO_SHA3) to cause a kernel stack buffer overflow by executing a crafted sequence of system calls that encounter a missing SHA-3 initialization.

In Zsh before 5.8, attackers able to execute commands can regain privileges dropped by the --no-PRIVILEGED option. Zsh fails to overwrite the saved uid, so the original privileges can be restored by executing MODULE_PATH=/dir/with/module zmodload with a module that calls setuid().

kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging incorrect BPF_RSH signed bounds calculations.

An issue was discovered in the Linux kernel before 4.14.11. A double free may be caused by the function allocate_trace_buffer in the file kernel/trace/trace.c.