A command Injection in ps package versions <1.0.0 for Node.js allowed arbitrary commands to be executed when attacker controls the PID.

A command injection vulnerability in the apex-publish-static-files npm module version <2.0.1 which allows arbitrary shell command execution through a maliciously crafted argument.

A flaw has been found in D-Link DIR-868L 110b03. This affects the function sub_1BF84 of the component SSDP Service. This manipulation of the argument ST causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Command Injection vulnerability in QTS 4.3.5 build 20181013, QTS 4.3.4 build 20181008, QTS 4.3.3 build 20180829, QTS 4.2.6 build 20180829 and earlier versions could allow remote attackers to run arbitrary commands on the NAS.

It was found that ceph-isci-cli package as shipped by Red Hat Ceph Storage 2 and 3 is using python-werkzeug in debug shell mode. This is done by setting debug=True in file /usr/bin/rbd-target-api provided by ceph-isci-cli package. This allows unauthenticated attackers to access this debug shell and escalate privileges. Once an attacker has successfully connected to this debug shell they will be able to execute arbitrary commands remotely. These commands will run with the same privileges as of user executing the application which is using python-werkzeug with debug shell mode enabled. In - Red Hat Ceph Storage 2 and 3, ceph-isci-cli package runs python-werkzeug library with root level permissions.

A security flaw has been discovered in Totolink N300RH 6.1c.1353_B20190305. Affected by this vulnerability is the function setWebWlanIdx of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument webWlanIdx results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

Green Packet WiMax DV-360 2.10.14-g1.0.6.1 devices allow Command Injection, with unauthenticated remote command execution, via a crafted payload to the HTTPS port, because lighttpd listens on all network interfaces (including the external Internet) by default. NOTE: this may overlap CVE-2017-9980.

A security vulnerability has been detected in SECCN Dingcheng G10 3.1.0.181203. This impacts the function qq of the file /cgi-bin/session_login.cgi. The manipulation of the argument User leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

The _httpsrequest function in Snoopy allows remote attackers to execute arbitrary commands. NOTE: this issue exists dues to an incomplete fix for CVE-2008-4796.

UI-Dialog 1.09 and earlier allows remote attackers to execute arbitrary commands.

The Net::Ping::External extension through 0.15 for Perl does not properly sanitize arguments (e.g., invalid hostnames) containing shell metacharacters before use of backticks in External.pm, allowing for shell command injection and arbitrary command execution if untrusted input is used.

NETGEAR has released fixes for a pre-authentication command injection in request_handler.php security vulnerability on the following product models: WC7500, running firmware versions prior to 6.5.3.5; WC7520, running firmware versions prior to 2.5.0.46; WC7600v1, running firmware versions prior to 6.5.3.5; WC7600v2, running firmware versions prior to 6.5.3.5; and WC9500, running firmware versions prior to 6.5.3.5.

dns-sync is a sync/blocking dns resolver. If untrusted user input is allowed into the resolve() method then command injection is possible.

QNAP has already patched this vulnerability. This security concern allows a remote attacker to run arbitrary commands on the QNAP Video Station 5.1.3 (for QTS 4.3.3), 5.2.0 (for QTS 4.3.4), and earlier.

masterCGI in the Unified Maintenance Tool in Alcatel OmniPCX Enterprise Communication Server R7.1 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the user parameter during a ping action.

TOTOLINK EX300_V2 V4.0.3c.7484 was discovered to contain a command injection vulnerability via the langType parameter in the setLanguageCfg function. This vulnerability is exploitable via a crafted MQTT data packet.

TP-Link Tapo C200 IP camera, on its 1.1.15 firmware version and below, is affected by an unauthenticated RCE vulnerability, present in the uhttpd binary running by default as root. The exploitation of this vulnerability allows an attacker to take full control of the camera.

The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to a Remote Command Injection vulnerability in its web administrative interface. This vulnerability occurs in the 'extensionsettings' CGI (/cgi-bin/extensionsettings) component responsible for handling some of the server's internal configurations. The CGI application doesn't properly escape the information it's passed when processing a particular multi-part form request involving scripts. The filename of the 'scriptname' variable is read in unsanitized before a call to system() is performed - allowing for remote command injection. Exploitation of this vulnerability yields shell access to the remote machine under the nobody user account. This is SonicWall Issue ID 181195.

scripts/license.pl in Veritas NetBackup Appliance 2.6.0.x through 2.6.0.4, 2.6.1.x through 2.6.1.2, 2.7.x through 2.7.3, and 3.0.x allow remote attackers to execute arbitrary commands via shell metacharacters in the hostName parameter to appliancews/getLicense.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

A command injection vulnerability exists in apply.cgi on the ASUS RP-AC52 access point, firmware version 1.0.1.1s and possibly earlier, web interface specifically in the action_script parameter. The action_script parameter specifies a script to be executed if the action_mode parameter does not contain a valid state. If the input provided by action_script does not match one of the hard coded options, then it will be executed as the argument of either a system() or an eval() call allowing arbitrary commands to be executed.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK40 before 2.5.1.16, RBR40 before 2.5.1.16, RBS40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, and RBS50Y before 2.6.1.40.

Directory traversal vulnerability in cgi-bin/rftest.cgi on Crestron AirMedia AM-100 devices with firmware before 1.4.0.13 allows remote attackers to execute arbitrary commands via a .. (dot dot) in the ATE_COMMAND parameter.

Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 allow Embedded_Ace_Set_Task.cgi command injection.

Eval injection vulnerability in the fm_saveHelperGatherItems function in ajax.php in the Form Manager plugin before 1.7.3 for WordPress allows remote attackers to execute arbitrary code via unspecified vectors.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

Unauthenticated Remote Command injection as root occurs in the Western Digital MyCloud NAS 2.11.142 index.php page via a modified Cookie header.

Unauthenticated Remote Command injection as root occurs in the Western Digital MyCloud NAS 2.11.142 /web/google_analytics.php URL via a modified arg parameter in the POST data.

The setFrom function in the Sendmail adapter in the zend-mail component before 2.4.11, 2.5.x, 2.6.x, and 2.7.x before 2.7.2, and Zend Framework before 2.4.11 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address.

The festivaltts4r gem for Ruby allows remote attackers to execute arbitrary commands via shell metacharacters in a string to the (1) to_speech or (2) to_mp3 method in lib/festivaltts4r/festival4r.rb.

A vulnerability in the parisneo/lollms, specifically in the `/unInstall_binding` endpoint, allows for arbitrary code execution due to insufficient sanitization of user input. The issue arises from the lack of path sanitization when handling the `name` parameter in the `unInstall_binding` function, allowing an attacker to traverse directories and execute arbitrary code by loading a malicious `__init__.py` file. This vulnerability affects the latest version of the software. The exploitation of this vulnerability could lead to remote code execution on the system where parisneo/lollms is deployed.

China Mobile An Lianbao WF-1 v1.0.1 router web interface through /api/ZRMacClone/mac_addr_clone receives parameters by POST request, and the parameter macType has a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

Synology Video Station before 1.5-0763 allows remote attackers to execute arbitrary shell commands via shell metacharacters in the subtitle_codepage parameter to subtitle.cgi.

Endian Firewall before 3.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) NEW_PASSWORD_1 or (2) NEW_PASSWORD_2 parameter to cgi-bin/chpasswd.cgi.

Module::Signature before 0.74 allows remote attackers to execute arbitrary shell commands via a crafted SIGNATURE file which is not properly handled when generating checksums from a signed manifest.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1938.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1986.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

Buffer overflow in an ActiveX control in MDraw30.ocx in Schneider Electric ProClima before 6.1.7 allows remote attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-8513 and CVE-2014-8514. NOTE: this may be clarified later based on details provided by researchers.

Command injection vulnerability in Helpdesk versions 1.1.21 and earlier in QNAP QTS 4.2.6 build 20180531, QTS 4.3.3 build 20180528, QTS 4.3.4 build 20180528 and their earlier versions could allow remote attackers to run arbitrary commands in the compromised application.

Snoopy allows remote attackers to execute arbitrary commands. NOTE: this vulnerability exists due to an incomplete fix for CVE-2014-5008.

The eslint-fixer package through 0.1.5 for Node.js allows command injection via shell metacharacters to the fix function. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. The ozum/eslint-fixer GitHub repository has been intentionally deleted

VMware Horizon View Client (2.x, 3.x and 4.x prior to 4.5.0) contains a command injection vulnerability in the service startup script. Successful exploitation of this issue may allow unprivileged users to escalate their privileges to root on the Mac OSX system where the client is installed.

Seagate BlackArmor NAS devices with firmware sg2000-2000.1331 allow remote attackers to execute arbitrary commands via shell metacharacters in the ip parameter to backupmgt/getAlias.php.

Command injection vulnerability in Music Station 5.1.2 and earlier versions in QNAP QTS 4.3.3 and 4.3.4 could allow remote attackers to run arbitrary commands in the compromised application.

Sharp NEC Displays ((UN462A R1.300 and prior to it, UN462VA R1.300 and prior to it, UN492S R1.300 and prior to it, UN492VS R1.300 and prior to it, UN552A R1.300 and prior to it, UN552S R1.300 and prior to it, UN552VS R1.300 and prior to it, UN552 R1.300 and prior to it, UN552V R1.300 and prior to it, UX552S R1.300 and prior to it, UX552 R1.300 and prior to it, V864Q R2.000 and prior to it, C861Q R2.000 and prior to it, P754Q R2.000 and prior to it, V754Q R2.000 and prior to it, C751Q R2.000 and prior to it, V984Q R2.000 and prior to it, C981Q R2.000 and prior to it, P654Q R2.000 and prior to it, V654Q R2.000 and prior to it, C651Q R2.000 and prior to it, V554Q R2.000 and prior to it, P404 R3.200 and prior to it, P484 R3.200 and prior to it, P554 R3.200 and prior to it, V404 R3.200 and prior to it, V484 R3.200 and prior to it, V554 R3.200 and prior to it, V404-T R3.200 and prior to it, V484-T R3.200 and prior to it, V554-T R3.200 and prior to it, C501 R2.000 and prior to it, C551 R2.000 and prior to it, C431 R2.000 and prior to it) allows an attacker a buffer overflow and to execute remote code by sending long parameters that contains specific characters in http request.

Emerson Process Management ROC800 RTU with software 3.50 and earlier, DL8000 RTU with software 2.30 and earlier, and ROC800L RTU with software 1.20 and earlier allows remote attackers to execute arbitrary commands via a TCP replay attack.

A vulnerability was determined in Sangfor Operation and Maintenance Management System up to 3.0.8. Impacted is the function WriterHandle.getCmd of the file /isomp-protocol/protocol/getCmd. This manipulation of the argument sessionPath causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "The product in question TEW-731RE for CVE-2025-15471 has been discontinued and end of life since October 23, 2020. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on the website product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.