The (1) Htpasswd authentication source in the authcrypt module and (2) SimpleSAML_Session class in SimpleSAMLphp 1.14.11 and earlier allow remote attackers to conduct timing side-channel attacks by leveraging use of the standard comparison operator to compare secret material against user input.

SimpleSAMLphp versions before 1.18.6 contain an information disclosure vulnerability. The module controller in `SimpleSAML\Module` that processes requests for pages hosted by modules, has code to identify paths ending with `.php` and process those as PHP code. If no other suitable way of handling the given path exists it presents the file to the browser. The check to identify paths ending with `.php` does not account for uppercase letters. If someone requests a path ending with e.g. `.PHP` and the server is serving the code from a case-insensitive file system, such as on Windows, the processing of the PHP code does not occur, and the source code is instead presented to the browser. An attacker may use this issue to gain access to the source code in third-party modules that is meant to be private, or even sensitive. However, the attack surface is considered small, as the attack will only work when SimpleSAMLphp serves such content from a file system that is not case-sensitive, such as on Windows. This issue is fixed in version 1.18.6.

SimpleSAMLphp 1.14.12 and earlier make it easier for man-in-the-middle attackers to obtain sensitive information by leveraging use of the aesEncrypt and aesDecrypt methods in the SimpleSAML/Utils/Crypto class to protect session identifiers in replies to non-HTTPS service providers.

A vulnerability has been found in sepidz SepidzDigitalMenu up to 7.1.0728.1 and classified as problematic. This vulnerability affects unknown code of the file /Waiters. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-252994 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in Cisco WebEx Meetings Server could allow unauthenticated, remote attackers to gain information that could allow them to access scheduled customer meetings. The vulnerability is due to an incomplete configuration of the robots.txt file on customer-hosted WebEx solutions and occurs when the Short URL functionality is not activated. All releases of Cisco WebEx Meetings Server later than release 2.5MR4 provide this functionality. An attacker could exploit this vulnerability via an exposed parameter to search for indexed meeting information. A successful exploit could allow the attacker to obtain scheduled meeting information and potentially allow the attacker to attend scheduled, customer meetings. This vulnerability affects the following releases of Cisco WebEx Meetings Server: 2.5, 2.6, 2.7, 2.8. Cisco Bug IDs: CSCve25950.

A vulnerability was detected in D-Link DIR-803 up to 1.04. Impacted is an unknown function of the file /getcfg.php of the component Configuration Handler. The manipulation of the argument AUTHORIZED_GROUP results in information disclosure. The attack may be performed from remote. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in Tenda AC9 15.03.05.14_multi. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/DownloadCfg.jpg of the component Configuration File Handler. This manipulation causes information disclosure. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Verysync 微力同步 2.21.3. This affects an unknown function of the file /safebrowsing/clientreport/download?key=dummytoken of the component Web Administration Module. Performing manipulation results in information disclosure. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IBM WebSphere eXtreme Scale 8.6.1 stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-Force ID: 177932.

An issue exists in Vanilla Forums before 2.0.17.9 due to the way cookies are handled.

CFNetwork in Apple Mac OS X 10.6.3 and 10.6.4 supports anonymous SSL and TLS connections, which allows man-in-the-middle attackers to redirect a connection and obtain sensitive information via crafted responses.

A security vulnerability has been detected in Verysync 微力同步 up to 2.21.3. The impacted element is an unknown function of the file /rest/f/api/resources/f96956469e7be39d of the component Web Administration Module. Such manipulation leads to information disclosure. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Joomla! 2.5.0 through 3.9.22. The globlal configuration page does not remove secrets from the HTML output, disclosing the current values.

A vulnerability was found in Jspxcms 10.2.0 and classified as problematic. Affected by this issue is some unknown functionality of the file /template/1/default/. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252698 is the identifier assigned to this vulnerability.

A vulnerability was found in Intelbras VIP S3020 G2, VIP S4020 G2, VIP S4020 G3 and VIP S4320 G2 up to 20241222 and classified as problematic. Affected by this issue is some unknown functionality of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor assesses that "the information disclosed in the URL is not sensitive or poses any risk to the user".

phpBook 2.1.0 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by doc/update_smilies_1.50-1.60.php and certain other files.

Elgg 1.7.6 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by vendors/simpletest/test/visual_test.php and certain other files.

Gwsync in SAP CRM 7.02 EHP 2 allows remote attackers to obtain sensitive information via unspecified vectors, related to an XML External Entity (XXE) issue.

A vulnerability in the web interface of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to access sensitive Virtual Temporary Directory information on an affected system. The vulnerability exists because the affected software does not sufficiently protect sensitive data when responding to HTTP requests that are sent to the web interface of the software. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web interface of the software on an affected system. A successful exploit could allow the attacker to access sensitive information about the software. The attacker could use this information to conduct additional reconnaissance attacks. Cisco Bug IDs: CSCvc52861.

Page table walks conducted by the MMU during virtual to physical address translation leave a trace in the last level cache of modern AMD processors. By performing a side-channel attack on the MMU operations, it is possible to leak data and code pointers from JavaScript, breaking ASLR.

An Information Exposure issue was discovered in Trihedral VTScada Versions prior to 11.2.26. Some files are exposed within the web server application to unauthenticated users. These files may contain sensitive configuration information.

JanRain PHP OpenID library (aka php-openid) 2.2.2 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by Auth/Yadis/Yadis.php and certain other files.

The sensitive information of webcam device is not properly protected. Remote attackers can unauthentically grant user’s credential.

The first time AirPods are connected to an iPhone, they become named after the user's name by default (e.g. Jane Doe's AirPods.) Websites with camera or microphone permission are able to enumerate device names, disclosing the user's name. To resolve this issue, Firefox added a special case that renames devices containing the substring 'AirPods' to simply 'AirPods'. This vulnerability affects Thunderbird < 68.6, Firefox < 74, Firefox < ESR68.6, and Firefox ESR < 68.6.

Open-Realty 2.5.8 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by install/versions/upgrade_115.inc.php and certain other files.

WSN Software 6.0.6 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by includes/prestart.php and certain other files.

A vulnerability was found in TOZED ZLT M30s up to 1.47. Impacted is an unknown function of the file /reqproc/proc_post of the component Web Management Interface. Performing manipulation of the argument goformId results in information disclosure. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

SugarCRM 6.1.0 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by themes/Sugar5/layout_utils.php and certain other files.

The chunk_split function in PHP 5.2 through 5.2.13 and 5.3 through 5.3.2 allows context-dependent attackers to obtain sensitive information (memory contents) by causing a userspace interruption of an internal function, related to the call time pass by reference feature.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RAX35 before 1.0.4.102, RAX38 before 1.0.4.102, and RAX40 before 1.0.4.102.

A CWE-200: Information Exposure vulnerability exists in Easergy T300, Firmware V1.5.2 and prior, which could allow an attacker to pack or unpack the archive with the firmware for the controller and modules using the usual tar archiver resulting in an information exposure.

Your Own URL Shortener (YOURLS) 1.5 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by includes/auth.php and certain other files.

A vulnerability classified as problematic has been found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. This affects an unknown part of the file /xml/info.xml of the component HTTP GET Request Handler. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A CWE-200: Information Exposure vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow attacker to obtain private keys.

A vulnerability was found in Guangzhou Huayi Intelligent Technology Jeewms 3.7. It has been rated as problematic. This issue affects the function preHandle of the file src/main/java/com/zzjee/wm/controller/WmOmNoticeHController.java. The manipulation of the argument request leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Sage X3 Installation Pathname Disclosure. A specially crafted packet can elicit a response from the AdxDSrv.exe component that reveals the installation directory of the product. Note that this vulnerability can be combined with CVE-2020-7388 to achieve full RCE. This issue was fixed in AdxAdmin 93.2.53, which ships with updates for on-premises versions of Sage X3 Version 9 (components shipped with Syracuse 9.22.7.2 and later), Sage X3 HR & Payroll Version 9 (those components that ship with Syracuse 9.24.1.3), Version 11 (components shipped with Syracuse 11.25.2.6 and later), and Version 12 (components shipped with Syracuse 12.10.2.8 and later) of Sage X3. Other on-premises versions of Sage X3 are unsupported by the vendor.

Podcast Generator 1.3 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by core/themes.php and certain other files.

Limbo CMS 1.0.4.2 and earlier allows remote attackers to obtain the installation path of the application via a direct request to (1) doc.inc.php, (2) element.inc.php, and (3) node.inc.php, which leaks the path in an error message.

Moodle 2.0.1 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by webservice/xmlrpc/locallib.php and certain other files.

For native-to-JS bridging, the app requires a unique token to be passed that ensures non-app code can't call the bridging functions. That token was being used for JS-to-native also, but it isn't needed in this case, and its usage was also leaking this token. This vulnerability affects Firefox for iOS < 25.

GE UR firmware versions prior to version 8.1x web server interface is supported on UR over HTTP protocol. It allows sensitive information exposure without authentication.

Yamamah 1.0 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by themes/default/index.php and certain other files.

Ananta Gazelle 1.0 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by modules/template.php and certain other files.

Products with Unified Automation .NET based OPC UA Client/Server SDK Bundle: Versions V3.0.7 and prior (.NET 4.5, 4.0, and 3.5 Framework versions only) are vulnerable to an uncontrolled recursion, which may allow an attacker to trigger a stack overflow.

TaskFreak! multi-mysql-0.6 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by include/language/zh/register_info.php and certain other files.

The html_entity_decode function in PHP 5.2 through 5.2.13 and 5.3 through 5.3.2 allows context-dependent attackers to obtain sensitive information (memory contents) or trigger memory corruption by causing a userspace interruption of an internal call, related to the call time pass by reference feature.

OrangeHRM 2.6.0.2 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by themes/orange/menu/Menu.php and certain other files.

DokuWiki 2009-12-25c allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by lib/tpl/index.php and certain other files.

A security flaw has been discovered in givanz Vvveb up to 1.0.7.2. This affects an unknown part of the component Image Handler. Performing manipulation results in information disclosure. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. Once again the project maintainer reacted very professional: "I accept the existence of these vulnerabilities. (...) I fixed the code to remove these vulnerabilities and will push the code to github and make a new release."

Mozilla Firefox before 3.6.26 and 4.x through 6.0, Thunderbird before 3.1.18 and 5.0 through 6.0, and SeaMonkey before 2.4 do not properly enforce the IPv6 literal address syntax, which allows remote attackers to obtain sensitive information by making XMLHttpRequest calls through a proxy and reading the error messages.