In the Linux kernel, the following vulnerability has been resolved: ext4: fix possible UAF when remounting r/o a mmp-protected file system After commit 618f003199c6 ("ext4: fix memory leak in ext4_fill_super"), after the file system is remounted read-only, there is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to point at freed memory, which the call to ext4_stop_mmpd() can trip over. Fix this by only allowing kmmpd() to exit when it is stopped via ext4_stop_mmpd(). Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>

In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix overflows checks in provide buffers Colin reported before possible overflow and sign extension problems in io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension"). Do that with help of check_<op>_overflow helpers. And fix struct io_provide_buf::len type, as it doesn't make much sense to keep it signed.

In the Linux kernel, the following vulnerability has been resolved: media: davinci: vpif: fix use-after-free on driver unbind The driver allocates and registers two platform device structures during probe, but the devices were never deregistered on driver unbind. This results in a use-after-free on driver unbind as the device structures were allocated using devres and would be freed by driver core when remove() returns. Fix this by adding the missing deregistration calls to the remove() callback and failing probe on registration errors. Note that the platform device structures must be freed using a proper release callback to avoid leaking associated resources like device names.

In the Linux kernel, the following vulnerability has been resolved: sched/scs: Reset task stack state in bringup_cpu() To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | done

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always make an attempt to map eVMCS after migration When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does exactly that). To make sure eVMCS is mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES request. Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to nested_vmx_vmexit() to make sure MSR permission bitmap is not switched when an immediate exit from L2 to L1 happens right after migration (caused by a pending event, for example). Unfortunately, in the exact same situation we still need to have eVMCS mapped so nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS. As a band-aid, restore nested_get_evmcs_page() when clearing KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far from being ideal as we can't easily propagate possible failures and even if we could, this is most likely already too late to do so. The whole 'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration seems to be fragile as we diverge too much from the 'native' path when vmptr loading happens on vmx_set_nested_state().

In the Linux kernel, the following vulnerability has been resolved: ethernet:enic: Fix a use after free bug in enic_hard_start_xmit In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside enic_queue_wq_skb, if some error happens, the skb will be freed by dev_kfree_skb(skb). But the freed skb is still used in skb_tx_timestamp(skb). My patch makes enic_queue_wq_skb() return error and goto spin_unlock() incase of error. The solution is provided by Govind. See https://lkml.org/lkml/2021/4/30/961.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge/panel: Cleanup connector on bridge detach If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block

In the Linux kernel, the following vulnerability has been resolved: padata: avoid UAF for reorder_work Although the previous patch can avoid ps and ps UAF for _do_serial, it can not avoid potential UAF issue for reorder_work. This issue can happen just as below: crypto_request crypto_request crypto_del_alg padata_do_serial ... padata_reorder // processes all remaining // requests then breaks while (1) { if (!padata) break; ... } padata_do_serial // new request added list_add // sees the new request queue_work(reorder_work) padata_reorder queue_work_on(squeue->work) ... <kworker context> padata_serial_worker // completes new request, // no more outstanding // requests crypto_del_alg // free pd <kworker context> invoke_padata_reorder // UAF of pd To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work' into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, change error flow on matcher disconnect Currently, when firmware failure occurs during matcher disconnect flow, the error flow of the function reconnects the matcher back and returns an error, which continues running the calling function and eventually frees the matcher that is being disconnected. This leads to a case where we have a freed matcher on the matchers list, which in turn leads to use-after-free and eventual crash. This patch fixes that by not trying to reconnect the matcher back when some FW command fails during disconnect. Note that we're dealing here with FW error. We can't overcome this problem. This might lead to bad steering state (e.g. wrong connection between matchers), and will also lead to resource leakage, as it is the case with any other error handling during resource destruction. However, the goal here is to allow the driver to continue and not crash the machine with use-after-free error.

In the Linux kernel, the following vulnerability has been resolved: atm: nicstar: Fix possible use-after-free in nicstar_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: misc/libmasm/module: Fix two use after free in ibmasm_init_one In ibmasm_init_one, it calls ibmasm_init_remote_input_dev(). Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are allocated by input_allocate_device(), and assigned to sp->remote.mouse_dev and sp->remote.keybd_dev respectively. In the err_free_devices error branch of ibmasm_init_one, mouse_dev and keybd_dev are freed by input_free_device(), and return error. Then the execution runs into error_send_message error branch of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev. My patch add a "error_init_remote" label to handle the error of ibmasm_init_remote_input_dev(), to avoid the uaf bugs.

NVIDIA NeMo Framework for all platforms contains a vulnerability in the export and deploy component, where malicious data created by an attacker could cause a code injection issue. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering.

In the Linux kernel, the following vulnerability has been resolved: net: lantiq: fix memory corruption in RX ring In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter.

In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")

In the Linux kernel, the following vulnerability has been resolved: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.

In the Linux kernel, the following vulnerability has been resolved: ACPI: custom_method: fix potential use-after-free issue In cm_write(), buf is always freed when reaching the end of the function. If the requested count is less than table.length, the allocated buffer will be freed but subsequent calls to cm_write() will still try to access it. Remove the unconditional kfree(buf) at the end of the function and set the buf to NULL in the -EINVAL error path to match the rest of function.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message]

In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.

The cifs_iovec_write function in fs/cifs/file.c in the Linux kernel through 3.13.5 does not properly handle uncached write operations that copy fewer than the requested number of bytes, which allows local users to obtain sensitive information from kernel memory, cause a denial of service (memory corruption and system crash), or possibly gain privileges via a writev system call with a crafted pointer.

In the Linux kernel, the following vulnerability has been resolved: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix wrong list_del in smc_lgr_cleanup_early smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [  231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [  231.278222] ------------[ cut here ]------------ [  231.278726] kernel BUG at lib/list_debug.c:53! [  231.279326] invalid opcode: 0000 [#1] SMP NOPTI [  231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [  231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [  231.281248] Workqueue: events smc_link_down_work [  231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [  231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [  231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [  231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [  231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [  231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [  231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [  231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [  231.288337] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [  231.289160] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [  231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [  231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [  231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [  231.291940] Call Trace: [  231.292211]  smc_lgr_terminate_sched+0x53/0xa0 [  231.292677]  smc_switch_conns+0x75/0x6b0 [  231.293085]  ? update_load_avg+0x1a6/0x590 [  231.293517]  ? ttwu_do_wakeup+0x17/0x150 [  231.293907]  ? update_load_avg+0x1a6/0x590 [  231.294317]  ? newidle_balance+0xca/0x3d0 [  231.294716]  smcr_link_down+0x50/0x1a0 [  231.295090]  ? __wake_up_common_lock+0x77/0x90 [  231.295534]  smc_link_down_work+0x46/0x60 [  231.295933]  process_one_work+0x18b/0x350

In the Linux kernel, the following vulnerability has been resolved: igb: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igb_poll() runs while the controller is reset this can lead to the driver try to free a skb that was already freed. (The crash is harder to reproduce with the igb driver, but the same potential problem exists as the code is identical to igc)

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_restart: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue.