Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before V5.6.8.3 and WAC510 before V5.6.8.3.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects GS728TP before 6.0.0.48, GS728TPPv2 before 6.0.0.48, GS728TPv2 before 6.0.0.48, GS752TPP before 6.0.0.48, and GS752TPv2 before 6.0.0.48.

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

An issue was discovered on NETGEAR Nighthawk M1 (MR1100) devices before 12.06.03. System commands can be executed, via the web interface, after authentication.

A stack-based buffer overflow in the upnpd binary running on NETGEAR WNDR3400v3 routers with firmware version 1.0.1.18_1.0.63 allows an attacker to remotely execute arbitrary code via a crafted UPnP SSDP packet.

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses the same default 8 character passphrase for the administrative console and the WPA2 pre-shared key. Either an attack against HTTP Basic Authentication or an attack against WPA2 could be used to determine this passphrase.

A vulnerability classified as problematic has been found in Netgear WN604 up to 20240719. Affected is an unknown function of the file siteSurvey.php. The manipulation leads to direct request. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272556. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

The password-recovery feature on NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier allows remote attackers to discover the cleartext administrator password by reading the cgi-bin/passrec.asp HTML source code.

An information leak in currentsetting.htm of Netgear R6850 v1.1.0.88 allows attackers to obtain sensitive information without any authentication required.

An information leak in the debuginfo.htm component of Netgear CBR40 2.5.0.28, Netgear CBK40 2.5.0.28, and Netgear CBK43 2.5.0.28 allows attackers to obtain sensitive information without any authentication required.

The administrative web interface of a Netgear C7800 Router running firmware version 6.01.07 (and possibly others) authenticates users via basic authentication, with an HTTP header containing a base64 value of the plaintext username and password. Because the web server also does not utilize transport security by default, this renders the administrative credentials vulnerable to eavesdropping by an adversary during every authenticated request made by a client to the router over a WLAN, or a LAN, should the adversary be able to perform a man-in-the-middle attack.

An information leak in the currentsetting.htm component of Netgear CBR40 2.5.0.28, Netgear CBK40 2.5.0.28, and Netgear CBK43 2.5.0.28 allows attackers to obtain sensitive information without any authentication required.

NETGEAR ProSafe GS724Tv3 and GS716Tv2 with firmware 5.4.1.13 and earlier; GS748Tv4 with firmware 5.4.1.14; GS510TP with firmware 5.4.0.6; GS752TPS, GS728TPS, GS728TS, and GS725TS with firmware 5.3.0.17; and GS752TXS and GS728TXS with firmware 6.1.0.12 allows remote attackers to read encrypted administrator credentials and other startup configurations via a direct request to filesystem/startup-config.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Authentication is not required to exploit this vulnerability The specific flaw exists within handling of firmware updates. The issue results from a fallback to a insecure protocol to deliver updates. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12308.

An Information Disclosure vulnerability exists in the my config file in NEtGEAR WGR614 v7 and v9, which could let a malicious user recover all previously used passwords on the device, for both the control panel and WEP/WPA/WPA2, in plaintext. This is a different issue than CVE-2012-6340.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

Netgear RAX43 version 1.0.3.96 does not utilize secure communications to the web interface. By default, all communication to/from the device is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

An information leak in the BRS_top.html component of Netgear R6850 v1.1.0.88 allows attackers to obtain sensitive information without any authentication required.

An information leak in debuginfo.htm of Netgear R6850 v1.1.0.88 allows attackers to obtain sensitive information without any authentication required.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6400v2 before 1.0.4.84, R6700v3 before 1.0.4.84, R7000 before 1.0.11.126, R6900P before 1.3.2.126, and R7000P before 1.3.2.126.

Certain NETGEAR devices are affected by disclosure of sensitive information. A UPnP request reveals a device's serial number, which can be used for a password reset. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.

A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /currentsetting.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.94.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects R6400 before 1.0.1.24, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects DST6501 before 1.1.0.6 and WNR2000v2 before 1.2.0.8.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects R6400v2 before 1.0.2.32, R7000P/R6900P before 1.0.0.56, R7900 before 1.0.1.18, R8300 before 1.0.2.100_1.0.82, R8500 before 1.0.2.100_1.0.82, and D8500 before 1.0.3.29.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6700 before 1.0.1.26, R7000 before 1.0.9.10, R7100LG before 1.0.0.32, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.32, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R6900P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8500 before 1.0.2.106, R8300 before 1.0.2.106, and WNDR3400v3 before 1.0.1.16.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6250 before V1.0.4.8, R6400 before V1.0.1.22, R6400v2 before V1.0.2.32, R7100LG before V1.0.0.32, R7300 before V1.0.0.52, R8300 before V1.0.2.94, R8500 before V1.0.2.100, D6220 before V1.0.0.28, D6400 before V1.0.0.60, and D8500 before V1.0.3.29.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R8300 before 1.0.2.106 and R8500 before 1.0.2.106.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of the file /debuginfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253382 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The update process of the Circle Parental Control Service on various NETGEAR routers allows remote attackers to achieve remote code execution as root via a MitM attack. While the parental controls themselves are not enabled by default on the routers, the Circle update daemon, circled, is enabled by default. This daemon connects to Circle and NETGEAR to obtain version information and updates to the circled daemon and its filtering database. However, database updates from NETGEAR are unsigned and downloaded via cleartext HTTP. As such, an attacker with the ability to perform a MitM attack on the device can respond to circled update requests with a crafted, compressed database file, the extraction of which gives the attacker the ability to overwrite executable files with attacker-controlled code. This affects R6400v2 1.0.4.106, R6700 1.0.2.16, R6700v3 1.0.4.106, R6900 1.0.2.16, R6900P 1.3.2.134, R7000 1.0.11.123, R7000P 1.3.2.134, R7850 1.0.5.68, R7900 1.0.4.38, R8000 1.0.4.68, and RS400 1.5.0.68.

A cleartext transmission vulnerability exists in the Remote Management functionality of Netgear Orbi Router RBR750 4.6.8.5. A specially-crafted man-in-the-middle attack can lead to a disclosure of sensitive information.

An exploitable arbitrary memory read vulnerability exists in the KCodes NetUSB.ko kernel module which enables the ReadySHARE Printer functionality of at least two NETGEAR Nighthawk Routers and potentially several other vendors/products. A specially crafted index value can cause an invalid memory read, resulting in a denial of service or remote information disclosure. An unauthenticated attacker can send a crafted packet on the local network to trigger this vulnerability.

NETGEAR MR1100 devices before 12.06.08.00 are affected by disclosure of administrative credentials.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.40, D6400 before 1.0.0.74, D7000 before 1.0.1.60, D7800 before 1.0.1.34, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.94, DGN2200Bv4 before 1.0.0.94, EX6200v2 before 1.0.1.50, EX7000 before 1.0.0.56, JR6150 before 1.0.1.18, R6050 before 1.0.1.10J, R6100 before 1.0.1.16, R6150 before 1.0.1.10, R6220 before 1.1.0.50, R6250 before 1.0.4.12, R6300v2 before 1.0.4.12, R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.26, R6700v2 before 1.2.0.4, R6800 before 1.0.1.10, R6900 before 1.0.1.26, R6900P before 1.0.0.58, R6900v2 before 1.2.0.4, R7000 before 1.0.9.6, R7000P before 1.0.0.58, R7100LG before 1.0.0.32, R7300 before 1.0.0.54, R7500 before 1.0.0.112, R7500v2 before 1.0.3.20, R7800 before 1.0.2.36, R7900 before 1.0.1.18, R8000 before 1.0.3.48, R8300 before 1.0.2.104, R8500 before 1.0.2.104, R9000 before 1.0.2.40, WNDR3400v3 before 1.0.1.14, WNDR3700v4 before 1.0.2.96, WNDR4300v1 before 1.0.2.98, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, and WNR3500Lv2 before 1.2.0.44.

NETGEAR GS810EMX devices before 1.0.0.5 are affected by disclosure of sensitive information.

A legacy extension's non-contentaccessible, defined resources can be loaded by an arbitrary web page through script. This script does this by using a maliciously crafted path string to reference the resources. Note: this vulnerability does not affect WebExtensions. This vulnerability affects Firefox < 59.

Unspecified vulnerability in WebAccess in Novell GroupWise 6.5, 7.0, 7.01, 7.02x, 7.03, 7.03HP1a, and 8.0 might allow remote attackers to obtain sensitive information via a crafted URL, related to conversion of POST requests to GET requests.

The web interface in the Rockwell Automation ControlLogix 1756-ENBT/A EtherNet/IP Bridge Module allows remote attackers to obtain "internal web page information" and "internal information about the module" via unspecified vectors. NOTE: this may overlap CVE-2002-1603.

IAX2 in Asterisk Open Source 1.2.x before 1.2.31, 1.4.x before 1.4.23-rc4, and 1.6.x before 1.6.0.3-rc2; Business Edition A.x.x, B.x.x before B.2.5.7, C.1.x.x before C.1.10.4, and C.2.x.x before C.2.1.2.1; and s800i 1.2.x before 1.3.0 responds differently to a failed login attempt depending on whether the user account exists, which allows remote attackers to enumerate valid usernames.

The screenshot images displayed in the Activity Stream page displayed when a new tab is opened is created from the meta tags of websites. An issue was discovered where the page could attempt to create these images through "file:" URLs from the local file system. This loading is blocked by the sandbox but could expose local data if combined with another attack that escapes sandbox protections. This vulnerability affects Firefox < 58.

An exploitable information disclosure vulnerability exists in the ACEManager functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A HTTP request can result in disclosure of the default configuration for the device. An attacker can send an unauthenticated HTTP request to trigger this vulnerability.

Sun Java System Application Server (AS) 8.1 and 8.2 allows remote attackers to read the Web Application configuration files in the (1) WEB-INF or (2) META-INF directory via a malformed request.

An issue was discovered in certain Apple products. iOS before 11.4 is affected. macOS before 10.13.5 is affected. The issue involves the "Mail" component. It allows remote attackers to read the cleartext content of S/MIME encrypted messages via direct exfiltration.

IntraLearn Software IntraLearn 2.1, and possibly other versions before 4.2.3, allows remote attackers to obtain sensitive information via a direct request to (1) Knowledge_Impact_Course.htm, (2) LRN-formatted_Course.htm, or (3) Create_Course.htm in help/1/Instructor/, which reveals the installation path in an error message.