NUUO NVRmini2 Network Video Recorder firmware through 3.9.1 allows remote attackers to execute arbitrary code or cause a denial of service (buffer overflow), resulting in ability to read camera feeds or reconfigure the device.

NUUO CMS all versions 3.1 and prior, The application uses a session identification mechanism that could allow attackers to obtain the active session ID, which could allow arbitrary remote code execution.

NUUO CMS all versions 3.1 and prior, The application creates default accounts that have hard-coded passwords, which could allow an attacker to gain privileged access.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

NUUO CMS All versions 3.3 and prior the application allows external input to construct a pathname that is able to be resolved outside the intended directory. This could allow an attacker to impersonate a legitimate user, obtain restricted information, or execute arbitrary code.

cgi_system in NUUO's NVRMini2 3.8.0 and below allows remote attackers to execute arbitrary code via crafted HTTP requests.

NUUO v03.11.00 was discovered to contain access control issue.

NUUO NVRmini2 through 3.11 allows an unauthenticated attacker to upload an encrypted TAR archive, which can be abused to add arbitrary users because of the lack of handle_import_user.php authentication. When combined with another flaw (CVE-2011-5325), it is possible to overwrite arbitrary files under the web root and achieve code execution as root.

NUUO Network Video Recorder Firmware 1.7.x through 3.3.x allows unauthenticated attackers to execute arbitrary commands via shell metacharacters to handle_load_config.php.

NUUO NVRmini 2 1.0.0 through 3.0.0 and NUUO NVRsolo 1.0.0 through 3.0.0 have hardcoded root credentials, which allows remote attackers to obtain administrative access via unspecified vectors.

handle_daylightsaving.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.0.0 through 3.0.0, NUUO Crystal 2.2.1 through 3.2.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the NTPServer parameter.

__debugging_center_utils___.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.7.5 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the log parameter.

upload.php on NUUO NVRmini 2 devices allows Arbitrary File Upload, such as upload of .php files.

NUUO CMS All versions 3.3 and prior the application allows the upload of arbitrary files that can modify or overwrite configuration files to the server, which could allow remote code execution.

HP Operations Manager has a default password of OvW*busr1 for the ovwebusr account, which allows remote attackers to execute arbitrary code via a session that uses the manager role to conduct unrestricted file upload attacks against the /manager servlet in the Tomcat servlet container. NOTE: this might overlap CVE-2009-3099 and CVE-2009-3843.

Intellicom NetBiter WebSCADA devices use default passwords for the HICP network configuration service, which makes it easier for remote attackers to modify network settings and cause a denial of service. NOTE: this is only a vulnerability when the administrator does not follow recommendations in the product's installation documentation. NOTE: this issue was originally reported to be hard-coded passwords, not default passwords.

The Internet Authentication Service (IAS) in Microsoft Windows 2000 SP4, XP SP2 and SP3, Server 2003 SP2, Vista Gold and SP1, and Server 2008 Gold does not properly verify the credentials in an MS-CHAP v2 Protected Extensible Authentication Protocol (PEAP) authentication request, which allows remote attackers to access network resources via a malformed request, aka "MS-CHAP Authentication Bypass Vulnerability."

Armorlogic Profense Web Application Firewall before 2.2.22, and 2.4.x before 2.4.4, has a default root password hash, and permits password-based root logins over SSH, which makes it easier for remote attackers to obtain access.

The Telnet service in Microsoft Windows 2000 SP4, XP SP2 and SP3, Server 2003 SP2, Vista Gold, SP1, and SP2, and Server 2008 Gold and SP2 allows remote Telnet servers to execute arbitrary code on a client machine by replaying the NTLM credentials of a client user, aka "Telnet Credential Reflection Vulnerability," a related issue to CVE-2000-0834.

The Axesstel MV 410R has a certain default administrator password, and does not force a password change, which makes it easier for remote attackers to obtain access.

MailEnable before 8.60 allows Privilege Escalation because admin accounts could be created as a consequence of %0A mishandling in AUTH.TAB after a password-change request.

The Huawei D100 has (1) a certain default administrator password for the web interface, and does not force a password change; and has (2) a default password of admin for the admin account in the telnet interface; which makes it easier for remote attackers to obtain access.

Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.1) uses default (1) usernames and (2) passwords for (a) the administrator and (b) web management, which makes it easier for remote attackers to perform configuration changes or obtain operating-system access.

Cisco Application Networking Manager (ANM) before 2.0 uses a default MySQL root password, which makes it easier for remote attackers to execute arbitrary operating-system commands or change system files.

Cisco Application Networking Manager (ANM) before 2.0 uses default usernames and passwords, which makes it easier for remote attackers to access the application, or cause a denial of service via configuration changes, related to "default user credentials during installation."

RioRey RIOS 4.6.6 and 4.7.0 uses an undocumented, hard-coded username (dbadmin) and password (sq!us3r) for an SSH tunnel, which allows remote attackers to gain privileges via port 8022.

Aztech ADSL2/2+ 4-port router has a default "isp" account with a default "isp" password, which allows remote attackers to obtain access if this default is not changed.

Nortel MG1000S, Signaling Server, and Call Server on the Communications Server 1000 (CS1K) 4.50.x contain multiple unspecified hard-coded accounts and passwords, which allows remote attackers to gain privileges.

GE Fanuc iFIX 5.0 and earlier relies on client-side authentication involving a weakly encrypted local password file, which allows remote attackers to bypass intended access restrictions and start privileged server login sessions by recovering a password or by using a modified program module.

HP Operations Dashboard has a default password of j2deployer for the j2deployer account, which allows remote attackers to execute arbitrary code via a session that uses the manager role to conduct unrestricted file upload attacks against the /manager servlet in the Tomcat servlet container. NOTE: this might overlap CVE-2009-3098.

The web interface (cgi-bin/admin.c) in CUPS before 1.3.8 uses the guest username when a user is not logged on to the web server, which makes it easier for remote attackers to bypass intended policy and conduct CSRF attacks via the (1) add and (2) cancel RSS subscription functions.

A vulnerability in the install function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the administrative web interface using a default hard-coded username and password that are used during install. The vulnerability is due to a hard-coded password that, in some cases, is not replaced with a unique password. A successful exploit could allow the attacker to access the administrative web interface with administrator-level privileges.

Open Dental before version 18.4 installs a mysql database and uses the default credentials of "root" with a blank password. This allows anyone on the network with access to the server to access all database information.

The Advantech ADAM-6000 module has 00000000 as its default password, which makes it easier for remote attackers to obtain access through an HTTP session, and (1) monitor or (2) control the module's Modbus/TCP I/O activity.

A vulnerability in the password reset function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password reset request. An attacker could exploit this vulnerability by submitting a password reset request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07245.

Dell EMC Integrated System for Microsoft Azure Stack Hub, versions 1906 – 2011, contain an undocumented default iDRAC account. A remote unauthenticated attacker, with the knowledge of the default credentials, could potentially exploit this to log in to the system to gain root privileges.

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.

The Cisco Linksys WRT350N with firmware 1.0.3.7 has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access.

Opera before 9.52 does not check the CRL override upon encountering a certificate that lacks a CRL, which has unknown impact and attack vectors. NOTE: it is not clear whether this is a vulnerability, but the vendor included it in a security section of the advisory.

An unauthenticated remote attacker may be able to execute commands to view wireless account credentials that are stored in cleartext on Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16, which may allow an attacker to gain access the host network. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.

Unspecified vulnerability in the PropFilePasswordEncoder utility in the Security component in IBM WebSphere Application Server (WAS) 5.1 before 5.1.1.19 has unknown impact and attack vectors.

The Remote Desktop Launcher in Thycotic Secret Server before 8.6.000010 does not properly cleanup a temporary file that contains an encrypted password once a session has ended.

Microsoft Windows Media Player 6.4, Windows Media Format Runtime 7.1 through 11, and Windows Media Services 4.1, 9, and 2008 do not properly use the Service Principal Name (SPN) identifier when validating replies to authentication requests, which allows remote servers to execute arbitrary code via vectors that employ NTLM credential reflection, aka "SPN Vulnerability."

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

Plone CMS 3.0.5, and probably other 3.x versions, places a base64 encoded form of the username and password in the __ac cookie for the admin account, which makes it easier for remote attackers to obtain administrative privileges by sniffing the network.

A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.

Cisco Clean Access (CCA) 3.6.x through 3.6.4.2 and 4.0.x through 4.0.3.2 does not properly configure or allow modification of a shared secret authentication key, which causes all devices to have the same shared sercet and allows remote attackers to gain unauthorized access.

An issue was discovered on Vera Veralite 1.7.481 devices. The device has an additional OpenWRT interface in addition to the standard web interface which allows the highest privileges a user can obtain on the device. This web interface uses root as the username and the password in the /etc/cmh/cmh.conf file which can be extracted by an attacker using a directory traversal attack, and then log in to the device with the highest privileges.

A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.

Cisco Application Velocity System (AVS) before 5.1.0 is installed with default passwords for some system accounts, which allows remote attackers to gain privileges.