The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24) when used in conjunction with a Baxter Spectrum v8.x (model 35700BAX2), operates a Telnet service on Port 1023 with hard-coded credentials.

Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16 is remotely accessible via Port 22/SSH without authentication. A remote attacker may be able to make unauthorized configuration changes to the WBM, as well as issue commands to access account credentials and shared keys. Baxter asserts that this vulnerability only allows access to features and functionality on the WBM and that the SIGMA Spectrum infusion pump cannot be controlled from the WBM. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.

Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16 has a default account with hard-coded credentials used with the FTP protocol. Baxter asserts no files can be transferred to or from the WBM using this account. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.

The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24) telnet Command-Line Interface, grants access to sensitive data stored on the WBM that permits temporary configuration changes to network settings of the WBM, and allows the WBM to be rebooted. Temporary configuration changes to network settings are removed upon reboot.

The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24) when configured for wireless networking the FTP service operating on the WBM remains operational until the WBM is rebooted.

The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24), when used with a Baxter Spectrum v8.x (model 35700BAX2) in a factory-default wireless configuration enables an FTP service with hard-coded credentials.

The Baxter Spectrum Wireless Battery Module (WBM) stores network credentials and PHI (only applicable to Spectrum IQ pumps using auto programming) in unencrypted form. An attacker with physical access to a device that hasn't had all data and settings erased may be able to extract sensitive information.

Baxter ExactaMix EM 2400 Versions 1.10, 1.11 and ExactaMix EM1200 Versions 1.1, 1.2 systems store device data with sensitive information in an unencrypted database. This could allow an attacker with network access to view or modify sensitive data including PHI.

Nuuo NT-4040 Titan, firmware NT-4040_01.07.0000.0015_1120, uses non-random default credentials of: admin:admin and localdisplay:111111. A remote network attacker can gain privileged access to a vulnerable device.

In MobaTek MobaXterm Personal Edition v11.1 Build 3860, the SSH private key and its password can be retrieved from process memory for the lifetime of the process, even after the user disconnects from the remote SSH server. This affects Passwordless Authentication that has a Password Protected SSH Private Key.

Weak default password cause vulnerability in SonicWall Email Security appliance which leads to attacker gain access to appliance database. This vulnerability affected Email Security Appliance version 10.0.2 and earlier.

The SeaMicro provisioning of Ubuntu MAAS logs credentials, including username and password, for the management interface. This issue affects Ubuntu MAAS versions prior to 1.9.2.

The IRC5 family with UAS service enabled comes by default with credentials that can be found on publicly available manuals. ABB considers this a well documented functionality that helps customer set up however, out of our research, we found multiple production systems running these exact default credentials and consider thereby this an exposure that should be mitigated. Moreover, future deployments should consider that these defaults should be forbidden (user should be forced to change them).

In several versions of JetBrains IntelliJ IDEA Ultimate, creating Task Servers configurations leads to saving a cleartext unencrypted record of the server credentials in the IDE configuration files. The issue has been fixed in the following versions: 2019.1, 2018.3.5, 2018.2.8, and 2018.1.8.

In several JetBrains IntelliJ IDEA versions, creating remote run configurations of JavaEE application servers leads to saving a cleartext record of the server credentials in the IDE configuration files. The issue has been fixed in the following versions: 2018.3.5, 2018.2.8, 2018.1.8.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. The application's configuration file contains parameters that represent passwords in cleartext.

TronLink Wallet 2.2.0 stores user wallet keystore in plaintext and places them in insecure storage. An attacker can read and reuse the user keystore of a valid user via /data/data/com.tronlink.wallet/shared_prefs/<wallet-name>.xml to gain unauthorized access.

The Zalora application 6.15.1 for Android stores confidential information insecurely on the system (i.e. plain text), which allows a non-root user to find out the username/password of a valid user via /data/data/com.zalora.android/shared_prefs/login_data.xml.

The .NET SDK WebForm Viewer in SAP Crystal Reports for Visual Studio (fixed in version 2010) discloses sensitive database information including credentials which can be misused by the attacker.

The Remote Desktop Launcher in Thycotic Secret Server before 8.6.000010 does not properly cleanup a temporary file that contains an encrypted password once a session has ended.

Sensitive Information Stored in Clear Text in Moxa ThingsPro IIoT Gateway and Device Management Software Solutions version 2.1.

An issue was discovered in GitLab Community and Enterprise Edition before 11.2.7, 11.3.x before 11.3.8, and 11.4.x before 11.4.3. It has Cleartext Storage of Sensitive Information.

Open Dental before version 18.4 installs a mysql database and uses the default credentials of "root" with a blank password. This allows anyone on the network with access to the server to access all database information.

A vulnerability in the install function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the administrative web interface using a default hard-coded username and password that are used during install. The vulnerability is due to a hard-coded password that, in some cases, is not replaced with a unique password. A successful exploit could allow the attacker to access the administrative web interface with administrator-level privileges.

A vulnerability in the password reset function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password reset request. An attacker could exploit this vulnerability by submitting a password reset request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07245.

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.

An issue was discovered on Vera Veralite 1.7.481 devices. The device has an additional OpenWRT interface in addition to the standard web interface which allows the highest privileges a user can obtain on the device. This web interface uses root as the username and the password in the /etc/cmh/cmh.conf file which can be extracted by an attacker using a directory traversal attack, and then log in to the device with the highest privileges.

Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function sub_436D6 in IDA pro is identified to be setting up the configuration for the device. If one scrolls to the address 0x000437C2 then one can see that /current_config is being set as an ALIAS for /mnt/mtd/Config folder on the device. If one TELNETs into the device and navigates to /mnt/mtd/Config folder, one can observe that it contains various files such as Account1, Account2, SHAACcount1, etc. This means that if one navigates to http://[IPofcamera]/current_config/Sha1Account1 then one should be able to view the content of the files. The security researchers assumed that this was only possible only after authentication to the device. However, when unauthenticated access tests were performed for the same URL as provided above, it was observed that the device file could be downloaded without any authentication.

An issue was discovered in Riello NetMan 204 14-2 and 15-2. The issue is with the login script and wrongpass Python script used for authentication. When calling wrongpass, the variables $VAL0 and $VAL1 should be enclosed in quotes to prevent the potential for Bash command injection. Further to this, VAL0 and VAL1 should be sanitised to ensure they do not contain malicious characters. Passing it the username of '-' will cause it to time out and log the user in because of poor error handling. This will log the attacker in as an administrator where the telnet / ssh services can be enabled, and the credentials for local users can be reset. Also, login.cgi accepts the username as a GET parameter, so login can be achieved by browsing to the /cgi-bin/login.cgi?username=-%20a URI.

In version 6.1.0.19 and prior of Wink Labs's Wink - Smart Home Android app, the OAuth token used by the app to authorize user access is not stored in an encrypted and secure manner.

In version 1.9.7 and prior of Insteon's Insteon for Hub Android app, the OAuth token used by the app to authorize user access is not stored in an encrypted and secure manner.

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

In Apache Airflow 1.8.2 and earlier, an experimental Airflow feature displayed authenticated cookies, as well as passwords to databases used by Airflow. An attacker who has limited access to airflow, whether it be via XSS or by leaving a machine unlocked can exfiltrate all credentials from the system.

Wi-Fi STATION L-02F Software version V10g and earlier allows remote attackers to access the device with administrative privileges and perform unintended operations through a backdoor account.

It has been reported that KIE server and Busitess Central before version 7.21.0.Final contain username and password as plaintext Java properties. Any app deployed on the same server would have access to these properties, thus granting access to ther services.

A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.

BMC Track-It! 11.4 before Hotfix 3 exposes an unauthenticated .NET remoting configuration service (ConfigurationService) on port 9010. This service contains a method that can be used to retrieve a configuration file that contains the application database name, username and password as well as the domain administrator username and password. These are encrypted with a fixed key and IV ("NumaraIT") using the DES algorithm. The domain administrator username and password can only be obtained if the Self-Service component is enabled, which is the most common scenario in enterprise deployments.

Green Packet DX-350 uses non-random default credentials of: root:wimax. A remote network attacker can gain privileged access to a vulnerable device.

Synology NAS servers DS107, firmware version 3.1-1639 and prior, and DS116, DS213, firmware versions prior to 5.2-5644-1, use non-random default credentials of: guest:(blank) and admin:(blank) . A remote network attacker can gain privileged access to a vulnerable device.

D-Link DSL-504T stores usernames and passwords in cleartext in the router configuration file, which allows remote attackers to obtain sensitive information.

An issue was discovered in Grafana through 7.3.4, when integrated with Zabbix. The Zabbix password can be found in the api_jsonrpc.php HTML source code. When the user logs in and allows the user to register, one can right click to view the source code and use Ctrl-F to search for password in api_jsonrpc.php to discover the Zabbix account password and URL address.

Intellian Satellite TV antennas t-Series and v-Series, firmware version 1.07, uses non-random default credentials of: ftp/ftp or intellian:12345678. A remote network attacker can gain elevated access to a vulnerable device.

MailEnable before 8.60 allows Privilege Escalation because admin accounts could be created as a consequence of %0A mishandling in AUTH.TAB after a password-change request.