Multiple open redirect vulnerabilities in xAdmin in EMC Document Sciences xPression 4.1 SP1 before Patch 47, 4.2 before Patch 26, and 4.5 before Patch 05, as used in Documentum Edition, Enterprise Edition Publish Engine, and Enterprise Edition Compuset Engine, allow remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via unspecified parameters.

The default configuration of EMC RSA BSAFE Toolkits and RSA Data Protection Manager (DPM) 20130918 uses the Dual Elliptic Curve Deterministic Random Bit Generation (Dual_EC_DRBG) algorithm, which makes it easier for context-dependent attackers to defeat cryptographic protection mechanisms by leveraging unspecified "security concerns," aka the ESA-2013-068 issue. NOTE: this issue has been SPLIT from CVE-2007-6755 because the vendor announcement did not state a specific technical rationale for a change in the algorithm; thus, CVE cannot reach a conclusion that a CVE-2007-6755 concern was the reason, or one of the reasons, for this change.

EMC Network Configuration Manager (NCM) 9.3.x, 9.4.0.x, 9.4.1.x, and 9.4.2.x is affected by a reflected cross-site scripting Vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC Isilon OneFS (versions prior to 8.1.0.1, versions prior to 8.0.1.2, versions prior to 8.0.0.6, version 7.2.1.x) is impacted by a reflected cross-site scripting vulnerability that may potentially be exploited by malicious users to compromise the affected system.

Open redirect vulnerability in EMC RSA Archer GRC 5.x before 5.4 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via unspecified vectors.

EMC Documentum D2 version 4.5 and EMC Documentum D2 version 4.6 has Reflected Cross-Site Scripting Vulnerabilities that could potentially be exploited by malicious users to compromise the affected system.

EMC RSA Authentication Manager 8.2 SP1 P4 and earlier contains a reflected cross-site scripting vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC Documentum WebTop Version 6.8, prior to P18 and Version 6.8.1, prior to P06; and EMC Documentum TaskSpace version 6.7SP3, prior to P02; and EMC Documentum Capital Projects Version 1.9, prior to P30 and Version 1.10, prior to P17; and EMC Documentum Administrator Version 7.0, Version 7.1, and Version 7.2 prior to P18 contain a Stored Cross-Site Scripting Vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC RSA Security Analytics 10.5.3 and 10.6.2 contains fixes for a Reflected Cross-Site Scripting vulnerability that could potentially be exploited by malicious users to compromise the affected system.

Cross-site scripting (XSS) vulnerability in EMC ViPR SRM before 3.7.2 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

EMC RSA Archer, versions prior to 6.2.0.8, contains a redirect vulnerability in the QuickLinks feature. A remote attacker may potentially exploit this vulnerability to redirect genuine users to phishing websites with the intent of obtaining sensitive information from the users.

RSA Authentication Manager versions prior to 8.3 P3 are affected by a DOM-based cross-site scripting vulnerability which exists in its embedded MadCap Flare Help files. A remote unauthenticated attacker could potentially exploit this vulnerability by tricking a victim application user to supply malicious HTML or JavaScript code to the browser DOM, which code is then executed by the web browser in the context of the vulnerable web application.

Cross-site scripting (XSS) vulnerability in EMC RSA Authentication Manager before 8.1 SP1 P14 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2016-0900.

Cross-site scripting (XSS) vulnerability in EMC RSA Authentication Manager before 8.1 SP1 P14 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2016-0901.

Cross-site scripting (XSS) vulnerability in EMC RSA Data Loss Prevention 9.6 before SP2 P5 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Open redirect vulnerability in EMC Unisphere Central before 4.0 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via an unspecified parameter.

EMC Secure Remote Services Virtual Edition (ESRS VE) 3.x before 3.06 does not properly verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

Open redirect vulnerability in EMC RSA Authentication Manager 8.x before 8.1 Patch 6 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via unspecified vectors.

RSA Identity Lifecycle and Governance versions 7.0.1, 7.0.2 and 7.1.0 contains a reflected cross-site scripting vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability by tricking a victim application user to supply malicious HTML or JavaScript code to a vulnerable web application, which is then reflected back to the victim and executed by the web browser.

Open redirect vulnerability in EMC Documentum WebTop before 6.8P02, Documentum Administrator before 7.2P01, Documentum Digital Assets Manager through 6.5SP6, Documentum Web Publishers through 6.5SP7, and Documentum Task Space through 6.7SP2 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a crafted URL.

RSA Authentication Manager Security Console, versions 8.3 P1 and earlier, contains a reflected cross-site scripting vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability by tricking a victim Security Console administrator to supply malicious HTML or JavaScript code to a vulnerable web application, which is then reflected back to the victim and executed by the web browser.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is affected by an open redirect vulnerability. A remote unprivileged attacker may potentially redirect legitimate users to arbitrary web sites and conduct phishing attacks. The attacker could then steal the victims' credentials and silently authenticate them to the RSA Archer application without the victims realizing an attack occurred.

EMC Documentum Webtop before 6.7 SP2, Documentum WDK before 6.7 SP2, Documentum Taskspace before 6.7 SP2, and Documentum Records Manager before 6.7 SP2 allow remote attackers to obtain sensitive information via vectors involving cross-origin frame navigation, related to a "Cross Frame Scripting" issue.

Session fixation vulnerability in EMC Documentum Webtop before 6.7 SP2, Documentum WDK before 6.7 SP2, Documentum Taskspace before 6.7 SP2, and Documentum Records Manager before 6.7 SP2 allows remote attackers to hijack web sessions via unspecified vectors.

Multiple cross-site request forgery (CSRF) vulnerabilities in EMC Document Sciences xPression 4.1 SP1 before Patch 47, 4.2 before Patch 26, and 4.5 before Patch 05, as used in Documentum Edition, Enterprise Edition Publish Engine, and Enterprise Edition Compuset Engine, allow remote attackers to hijack the authentication of administrators for requests that perform administrative actions in (1) xAdmin or (2) xDashboard.

Multiple cross-site request forgery (CSRF) vulnerabilities in administrative pages in EMC ViPR SRM before 3.7 allow remote attackers to hijack the authentication of administrators.

Cross-site request forgery (CSRF) vulnerability in EMC Documentum WebTop before 6.8P01, Documentum Administrator through 7.2, Documentum Digital Assets Manager through 6.5SP6, Documentum Web Publishers through 6.5SP7, and Documentum Task Space through 6.7SP2 allows remote attackers to hijack the authentication of arbitrary users. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-2518.

Multiple cross-site request forgery (CSRF) vulnerabilities in EMC RSA Archer GRC 5.5 SP1 before P3 allow remote attackers to hijack the authentication of arbitrary users.

Cross-site request forgery (CSRF) vulnerability in EMC Documentum Web Development Kit (WDK) before 6.8 allows remote attackers to hijack the authentication of arbitrary users for requests that perform Docbase operations.

Multiple cross-site request forgery (CSRF) vulnerabilities in EMC Documentum WDK before 6.7SP1 P28 and 6.7SP2 before P15 allow remote attackers to hijack the authentication of arbitrary users.

Cross-site request forgery (CSRF) vulnerability in EMC RSA Archer GRC Platform 5.x before 5.5 SP1 allows remote attackers to hijack the authentication of arbitrary users.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is potentially affected by a cross-site request forgery vulnerability. A remote low privileged attacker may potentially exploit the vulnerability to execute unauthorized requests on behalf of the victim, using the authenticated user's privileges.

Cross-site request forgery (CSRF) vulnerability in the web interface in EMC RSA NetWitness Informer before 2.0.5.6 allows remote attackers to hijack the authentication of arbitrary users.

Cognitoys Dino devices allow profiles_add.html CSRF.

showdoc is vulnerable to Cross-Site Request Forgery (CSRF)

showdoc is vulnerable to Cross-Site Request Forgery (CSRF)

A vulnerability in the application integration feature of Cisco Webex Software could allow an unauthenticated, remote attacker to authorize an external application to integrate with and access a user's account without that user's express consent. This vulnerability is due to improper validation of cross-site request forgery (CSRF) tokens. An attacker could exploit this vulnerability by convincing a targeted user who is currently authenticated to Cisco Webex Software to follow a link designed to pass malicious input to the Cisco Webex Software application authorization interface. A successful exploit could allow the attacker to cause Cisco Webex Software to authorize an application on the user's behalf without the express consent of the user, possibly allowing external applications to read data from that user's profile.

FastAPI is a web framework for building APIs with Python 3.6+ based on standard Python type hints. FastAPI versions lower than 0.65.2 that used cookies for authentication in path operations that received JSON payloads sent by browsers were vulnerable to a Cross-Site Request Forgery (CSRF) attack. In versions lower than 0.65.2, FastAPI would try to read the request payload as JSON even if the content-type header sent was not set to application/json or a compatible JSON media type (e.g. application/geo+json). A request with a content type of text/plain containing JSON data would be accepted and the JSON data would be extracted. Requests with content type text/plain are exempt from CORS preflights, for being considered Simple requests. The browser will execute them right away including cookies, and the text content could be a JSON string that would be parsed and accepted by the FastAPI application. This is fixed in FastAPI 0.65.2. The request data is now parsed as JSON only if the content-type header is application/json or another JSON compatible media type like application/geo+json. It's best to upgrade to the latest FastAPI, but if updating is not possible then a middleware or a dependency that checks the content-type header and aborts the request if it is not application/json or another JSON compatible content type can act as a mitigating workaround.

The Database Backups WordPress plugin through 1.2.2.6 does not have CSRF checks, allowing attackers to make a logged in user unwanted actions, such as generate backups of the database, change the plugin's settings and delete backups.

Redash is a package for data visualization and sharing. In Redash version 10.0 and prior, the implementation of Google Login (via OAuth) incorrectly uses the `state` parameter to pass the next URL to redirect the user to after login. The `state` parameter should be used for a Cross-Site Request Forgery (CSRF) token, not a static and easily predicted value. This vulnerability does not affect users who do not use Google Login for their instance of Redash. A patch in the `master` and `release/10.x.x` branches addresses this by replacing `Flask-Oauthlib` with `Authlib` which automatically provides and validates a CSRF token for the state variable. The new implementation stores the next URL on the user session object. As a workaround, one may disable Google Login to mitigate the vulnerability.

A cross-site request forgery (CSRF) vulnerability in Jenkins P4 Plugin 1.11.4 and earlier allows attackers to connect to an attacker-specified Perforce server using attacker-specified username and password.

In IgniteNet HeliOS GLinq v2.2.1 r2961, the login functionality does not contain any CSRF protection mechanisms.

A vulnerability in the web-based management interface of Cisco HyperFlex HX-Series could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected system. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on an affected system by using a web browser and with the privileges of the user.

An issue was discovered in Squid 3.x and 4.x through 4.8 when the append_domain setting is used (because the appended characters do not properly interact with hostname length restrictions). Due to incorrect message processing, it can inappropriately redirect traffic to origins it should not be delivered to.

A vulnerability has been identified in XHQ (All versions < V6.0.0.2). The web interface could allow a Cross-Site Request Forgery (CSRF) attack if an unsuspecting user is tricked into accessing a malicious link. Successful exploitation requires user interaction by a legitimate user, who must be authenticated to the web interface. A successful attack could allow an attacker to trigger actions via the web interface that the legitimate user is allowed to perform. This could allow the attacker to read or modify contents of the web application. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue was discovered on NETGEAR Nighthawk M1 (MR1100) devices before 12.06.03. The web-interface Cross-Site Request Forgery token is stored in a dynamically generated JavaScript file, and therefore can be embedded in third party pages, and re-used against the Nighthawk web interface. This entirely bypasses the intended security benefits of the use of a CSRF-protection token.

A flaw was found in OpenShift Container Platform, versions 3.11 and later, in which the CSRF tokens used in the cluster console component were found to remain static during a user's session. An attacker with the ability to observe the value of this token would be able to re-use the token to perform a CSRF attack.

WCMS v0.3.2 has a CSRF vulnerability, with resultant directory traversal, to modify index.html via the /wex/html.php?finish=../index.html URI.

The newsfeed (aka /index.php?page=viewnews) in BTITeam XBTIT 2.5.4 has stored XSS via the title of a news item. This is also exploitable via CSRF.

An issue was discovered on Systrome ISG-600C, ISG-600H, and ISG-800W 1.1-R2.1_TRUNK-20180914.bin devices. There is CSRF via /ui/?g=obj_keywords_add and /ui/?g=obj_keywords_addsave with resultant XSS because of a lack of csrf token validation.