Junos OS routing protocol daemon (RPD) process may crash and restart or may lead to remote code execution while processing specific BGP NOTIFICATION messages. By continuously sending crafted BGP NOTIFICATION messages, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Due to design improvements, this issue does not affect Junos OS 16.1R1, and all subsequent releases. This issue only affects the receiving BGP device and is non-transitive in nature. Affected releases are Juniper Networks Junos OS: 15.1F5 versions starting from 15.1F5-S7 and all subsequent releases; 15.1F6 versions starting from 15.1F6-S3 and later releases prior to 15.1F6-S10; 15.1F7 versions 15.1 versions starting from 15.1R5 and later releases, including the Service Releases based on 15.1R5 and on 15.1R6 prior to 15.1R6-S6 and 15.1R7;

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code or cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69954, CSCve02463, CSCve02785, CSCve02787, CSCve02804, CSCve04859.

A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.

A Code Execution vulnerability exists the attachment parameter to index.php in Jcow CMS 4.x to 4.2 and 5.2 to 5.2.

In all Qualcomm products with Android releases from CAF using the Linux kernel, an assertion was potentially reachable in a WLAN driver ioctl.

A vulnerability in the ACS Report component of Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. Commands executed by the attacker are processed at the targeted user's privilege level. The vulnerability is due to insufficient validation of the Action Message Format (AMF) protocol. An attacker could exploit this vulnerability by sending a crafted AMF message that contains malicious code to a targeted user. A successful exploit could allow the attacker to execute arbitrary commands on the ACS device. This vulnerability affects all releases of Cisco Secure ACS prior to Release 5.8 Patch 7. Cisco Bug IDs: CSCve69037.

An issue was discovered in zsh before 5.6. The beginning of a #! script file was mishandled, potentially leading to an execve call to a program named on the second line.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.

A input validation vulnerability in HPE Operations Orchestration product all versions prior to 10.80, allows for the execution of code remotely.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.

The Windows Graphical Device Interface library (GDI32.DLL) in Microsoft Windows allows remote attackers to execute arbitrary code via a Windows Metafile (WMF) format image with a crafted SETABORTPROC GDI Escape function call, related to the Windows Picture and Fax Viewer (SHIMGVW.DLL), a different vulnerability than CVE-2005-2123 and CVE-2005-2124, and as originally discovered in the wild on unionseek.com.

A Remote Code Execution vulnerability in Hewlett Packard Enterprise Moonshot Provisioning Manager Appliance version v1.20 was found.

DotNetNuke 2.0 through 4.8.4 allows remote attackers to load .ascx files instead of skin files, and possibly access privileged functionality, via unknown vectors related to parameter validation.

In libzypp before August 2018 GPG keys attached to YUM repositories were not correctly pinned, allowing malicious repository mirrors to silently downgrade to unsigned repositories with potential malicious content.

The UMA product with software V200R001 and V300R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

The UMA product with software V200R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

A weak password recovery process vulnerability in Fortinet FortiPortal versions 4.0.0 and below allows an attacker to execute unauthorized code or commands via a hidden Close button

The UMA product with software V200R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

An issue was discovered in api/includes/systems.php in Unitrends Enterprise Backup before 9.0.0. User input is not properly filtered before being sent to a popen function. This allows for remote code execution by sending a specially crafted user variable.

The UMA product with software V200R001 and V300R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

The UMA product with software V200R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

The UMA product with software V200R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

The UMA product with software V200R001 and V300R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

setup.php in phpStat 1.5 allows remote attackers to bypass authentication and gain administrator privileges by setting the $check variable.

Kiwi before 3.74.2, as used in SUSE Studio 1.1 before 1.1.4, allows attackers to execute arbitrary commands via shell metacharacters in an unspecified FileUtils function call.

An improper input validation vulnerability in CA Privileged Access Manager 2.4.4.4 and earlier allows remote attackers to execute arbitrary commands.

Ansible before versions 2.3.1.0 and 2.4.0.0 fails to properly mark lookup-plugin results as unsafe. If an attacker could control the results of lookup() calls, they could inject Unicode strings to be parsed by the jinja2 templating system, resulting in code execution. By default, the jinja2 templating language is now marked as 'unsafe' and is not evaluated.

PHP before 5.4.42, 5.5.x before 5.5.26, and 5.6.x before 5.6.10 does not ensure that pathnames lack %00 sequences, which might allow remote attackers to read or write to arbitrary files via crafted input to an application that calls (1) a DOMDocument save method or (2) the GD imagepsloadfont function, as demonstrated by a filename\0.html attack that bypasses an intended configuration in which client users may write to only .html files.

Stack-based buffer overflow in the Ipropsapi.ipropsapiCtrl.1 ActiveX control in ipropsapivideo in Panasonic Security API (PS-API) ActiveX SDK before 8.10.18 allows remote attackers to execute arbitrary code via a long string to the MulticastAddr method.

The multifilesystem storage backend in Radicale before 1.1 allows remote attackers to read or write to arbitrary files via a crafted component name.

A vulnerability has been found in viames Pair Framework up to 1.9.11 and classified as critical. Affected by this vulnerability is the function getCookieContent of the file /src/UserRemember.php of the component PHP Object Handler. The manipulation of the argument cookieName leads to deserialization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Policy resource matcher in Apache Ranger before 0.7.1 ignores characters after '*' wildcard character - like my*test, test*.txt. This can result in unintended behavior.

The UMA product with software V200R001 and V300R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

Util.pm in Bugzilla 2.x, 3.x, and 4.x before 4.2.15, 4.3.x and 4.4.x before 4.4.10, and 5.x before 5.0.1 mishandles long e-mail addresses during account registration, which allows remote attackers to obtain the default privileges for an arbitrary domain name by placing that name in a substring of an address, as demonstrated by truncation of an @mozilla.com.example.com address to an @mozilla.com address.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Automobile and Snapdragon Mobile MDM9625, SD 425, SD 430, SD 450, SD 625, SD 650/52, SD 820, and SD 820A, no address argument validation performed on calls to a QSEE syscall may lead to arbitrary read/write or NULL Pointer exception when calling a downstream function.

Apache ActiveMQ 5.x before 5.13.0 does not restrict the classes that can be serialized in the broker, which allows remote attackers to execute arbitrary code via a crafted serialized Java Message Service (JMS) ObjectMessage object.

Google Chrome before 9.0.597.94 does not properly perform event handling for animations, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors that lead to a "stale pointer."

The Remote Agent component in Schneider Electric InduSoft Web Studio before 8.0 allows remote attackers to execute arbitrary code via unspecified vectors, aka ZDI-CAN-2649.

The ff_mpv_common_init function in libavcodec/mpegvideo.c in FFmpeg before 2.7.2 does not properly maintain the encoding context, which allows remote attackers to cause a denial of service (invalid pointer access) or possibly have unspecified other impact via crafted MPEG data.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Schneider Electric InduSoft Web Studio before 8.0 allows remote attackers to execute arbitrary code or cause a denial of service (unhandled runtime exception and application crash) via a crafted Indusoft Project file.

dhclient in ISC DHCP 3.0.x through 4.2.x before 4.2.1-P1, 3.1-ESV before 3.1-ESV-R1, and 4.1-ESV before 4.1-ESV-R2 allows remote attackers to execute arbitrary commands via shell metacharacters in a hostname obtained from a DHCP message, as demonstrated by a hostname that is provided to dhclient-script.

An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

Webservice-DIC yoyaku_v41 allows remote attackers to create arbitrary files, and consequently execute arbitrary code, via unspecified vectors.

An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

Astaro Security Gateway (aka ASG) 7 allows remote attackers to execute arbitrary code via a crafted request to index.plx.

A vulnerability in the update process for the dynamic JAR file of the Cisco Context Service software development kit (SDK) could allow an unauthenticated, remote attacker to execute arbitrary code on the affected device with the privileges of the web server. More Information: CSCvb66730. Known Affected Releases: 2.0.

Pexip Infinity before 14.2 allows remote attackers to cause a denial of service (service restart) or execute arbitrary code via vectors related to Conferencing Nodes.

PivotX before 2.3.11 does not validate the new file extension when renaming a file with multiple extensions, which allows remote attackers to execute arbitrary code by uploading a crafted file, as demonstrated by a file named foo.php.php.