The vmsvga_fifo_run function in hw/display/vmware_vga.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a VGA command.

The get_cmd function in hw/scsi/esp.c in the 53C9X Fast SCSI Controller (FSC) support in QEMU does not properly check DMA length, which allows local guest OS administrators to cause a denial of service (out-of-bounds write and QEMU process crash) via unspecified vectors, involving an SCSI command.

Integer overflow in the VGA module in QEMU allows local guest OS users to cause a denial of service (out-of-bounds read and QEMU process crash) by editing VGA registers in VBE mode.

QEMU (aka Quick Emulator) built with the USB EHCI emulation support is vulnerable to a null pointer dereference flaw. It could occur when an application attempts to write to EHCI capabilities registers. A privileged user inside quest could use this flaw to crash the QEMU process instance resulting in DoS.

QEMU (aka Quick Emulator) built with the e1000 NIC emulation support is vulnerable to an infinite loop issue. It could occur while processing data via transmit or receive descriptors, provided the initial receive/transmit descriptor head (TDH/RDH) is set outside the allocated descriptor buffer. A privileged user inside guest could use this flaw to crash the QEMU instance resulting in DoS.

The is_rndis function in the USB Net device emulator (hw/usb/dev-network.c) in QEMU before 2.5.1 does not properly validate USB configuration descriptor objects, which allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors involving a remote NDIS control message packet.

A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a single, large transfer request, to reduce the overhead and improve performance. The combined size of the bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a denial of service.

QEMU (aka Quick Emulator) built with an IDE AHCI emulation support is vulnerable to a null pointer dereference flaw. It occurs while unmapping the Frame Information Structure (FIS) and Command List Block (CLB) entries. A privileged user inside guest could use this flaw to crash the QEMU process instance resulting in DoS.

hw/display/cirrus_vga_rop.h in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (out-of-bounds read and QEMU process crash) via vectors related to copying VGA data via the cirrus_bitblt_rop_fwd_transp_ and cirrus_bitblt_rop_fwd_ functions.

The virgl_cmd_get_capset function in hw/display/virtio-gpu-3d.c in QEMU (aka Quick Emulator) built with Virtio GPU Device emulator support allows local guest OS users to cause a denial of service (out-of-bounds read and process crash) via a VIRTIO_GPU_CMD_GET_CAPSET command with a maximum capabilities size with a value of 0.

The virtio_gpu_set_scanout function in QEMU (aka Quick Emulator) built with Virtio GPU Device emulator support allows local guest OS users to cause a denial of service (out-of-bounds read and process crash) via a scanout id in a VIRTIO_GPU_CMD_SET_SCANOUT command larger than num_scanouts.

QEMU (aka Quick Emulator) built with the Rocker switch emulation support is vulnerable to an off-by-one error. It happens while processing transmit (tx) descriptors in 'tx_consume' routine, if a descriptor was to have more than allowed (ROCKER_TX_FRAGS_MAX=16) fragments. A privileged user inside guest could use this flaw to cause memory leakage on the host or crash the QEMU process instance resulting in DoS issue.

A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the host resulting in DoS scenario.

In QEMU 1:4.1-1, 1:2.1+dfsg-12+deb8u6, 1:2.8+dfsg-6+deb9u8, 1:3.1+dfsg-8~deb10u1, 1:3.1+dfsg-8+deb10u2, and 1:2.1+dfsg-12+deb8u12 (fixed), when executing script in lsi_execute_script(), the LSI scsi adapter emulator advances 's->dsp' index to read next opcode. This can lead to an infinite loop if the next opcode is empty. Move the existing loop exit after 10k iterations so that it covers no-op opcodes as well.

QEMU (aka Quick Emulator) built to use 'address_space_translate' to map an address to a MemoryRegionSection is vulnerable to an OOB r/w access issue. It could occur while doing pci_dma_read/write calls. Affects QEMU versions >= 1.6.0 and <= 2.3.1. A privileged user inside guest could use this flaw to crash the guest instance resulting in DoS.

The eepro100 emulator in QEMU qemu-kvm blank allows local guest users to cause a denial of service (application crash and infinite loop) via vectors involving the command block list.

QEMU (aka Quick Emulator) built with a VMWARE VMXNET3 paravirtual NIC emulator support is vulnerable to crash issue. It could occur while reading Interrupt Mask Registers (IMR). A privileged (CAP_SYS_RAWIO) guest user could use this flaw to crash the QEMU process instance resulting in DoS.

The cpu_physical_memory_write_rom_internal function in exec.c in QEMU (aka Quick Emulator) does not properly skip MMIO regions, which allows local privileged guest users to cause a denial of service (guest crash) via unspecified vectors.

The MSI-X MMIO support in hw/pci/msix.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) by leveraging failure to define the .write method.

The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL dereference) when the command header 'ad->cur_cmd' is null.

QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not checked.

Quick Emulator (aka QEMU), when built with the Cirrus CLGD 54xx VGA Emulator support, allows local guest OS privileged users to cause a denial of service (out-of-bounds access and QEMU process crash) by leveraging incorrect region calculation when updating VGA display.

The vga_draw_text function in Qemu allows local OS guest privileged users to cause a denial of service (out-of-bounds read and QEMU process crash) by leveraging improper memory address validation.

A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while processing read/write ioport commands if the selected floppy drive is not initialized with a block device. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

The intel_hda_xfer function in hw/audio/intel-hda.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via an entry with the same value for buffer length and pointer position.

A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

The rtl8139_cplus_transmit function in hw/net/rtl8139.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) by leveraging failure to limit the ring descriptor count.

Multiple integer overflows in the (1) v9fs_xattr_read and (2) v9fs_xattr_write functions in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local guest OS administrators to cause a denial of service (QEMU process crash) via a crafted offset, which triggers an out-of-bounds access.

Integer overflow in the emulated_apdu_from_guest function in usb/dev-smartcard-reader.c in Quick Emulator (Qemu), when built with the CCID Card device emulator support, allows local users to cause a denial of service (application crash) via a large Application Protocol Data Units (APDU) unit.

The pciej_write function in hw/acpi_piix4.c in the PIIX4 Power Management emulation in qemu-kvm does not check if a device is hotpluggable before unplugging the PCI-ISA bridge, which allows privileged guest users to cause a denial of service (guest crash) and possibly execute arbitrary code by sending a crafted value to the 0xae08 (PCI_EJ_BASE) I/O port, which leads to a use-after-free related to "active qemu timers."

The virtio_net_bad_features function in hw/virtio-net.c in the virtio-net driver in the Linux kernel before 2.6.26, when used on a guest OS in conjunction with qemu-kvm 0.11.0 or KVM 83, allows remote attackers to cause a denial of service (guest OS crash, and an associated qemu-kvm process exit) by sending a large amount of network traffic to a TCP port on the guest OS, related to a virtio-net whitelist that includes an improper implementation of TCP Segment Offloading (TSO).

The set_pixel_format function in ui/vnc.c in QEMU allows remote attackers to cause a denial of service (crash) via a small bytes_per_pixel value.

hw/input/ps2.c in Qemu does not validate 'rptr' and 'count' values during guest migration, leading to out-of-bounds access.

The host_from_stream_offset function in arch_init.c in QEMU, when loading RAM during migration, allows remote attackers to execute arbitrary code via a crafted (1) offset or (2) length value in savevm data.

QEMU before 2.0.0 block drivers for CLOOP, QCOW2 version 2 and various other image formats are vulnerable to potential memory corruptions, integer/buffer overflows or crash caused by missing input validations which could allow a remote user to execute arbitrary code on the host with the privileges of the QEMU process.

hw/net/vmxnet3.c in QEMU 2.0.0-rc0, 1.7.1, and earlier allows local guest users to cause a denial of service or possibly execute arbitrary code via vectors related to (1) RX or (2) TX queue numbers or (3) interrupt indices. NOTE: some of these details are obtained from third party information.

The virtqueue_map_sg function in hw/virtio/virtio.c in QEMU before 1.7.2 allows remote attackers to execute arbitrary files via a crafted savevm image, related to virtio-block or virtio-serial read.

The qemu-nbd server in QEMU (aka Quick Emulator), when built with the Network Block Device (NBD) Server support, allows remote attackers to cause a denial of service (segmentation fault and server crash) by leveraging failure to ensure that all initialization occurs before talking to a client in the nbd_negotiate function.

VNC server implementation in Quick Emulator (QEMU) 2.11.0 and older was found to be vulnerable to an unbounded memory allocation issue, as it did not throttle the framebuffer updates sent to its client. If the client did not consume these updates, VNC server allocates growing memory to hold onto this data. A malicious remote VNC client could use this flaw to cause DoS to the server host.

An assertion-failure flaw was found in Qemu before 2.10.1, in the Network Block Device (NBD) server's initial connection negotiation, where the I/O coroutine was undefined. This could crash the qemu-nbd server if a client sent unexpected data during connection negotiation. A remote user or process could use this flaw to crash the qemu-nbd server resulting in denial of service.

Qemu, as used in Xen 4.0, 4.1 and possibly other products, when emulating certain devices with a virtual console backend, allows local OS guest users to gain privileges via a crafted escape VT100 sequence that triggers the overwrite of a "device model's address space."

lnsfw1.sys 6.0.2900.5512 in Look 'n' Stop Firewall 2.06p4 and 2.07 allows local users to cause a denial of service (crash) via a crafted 0x80000064 IOCTL request that triggers an assertion failure. NOTE: some of these details are obtained from third party information.

A component of the HarmonyOS has a Improper Input Validation vulnerability. Local attackers may exploit this vulnerability to cause out-of-bounds write.

The staprun runtime tool in SystemTap 1.3 does not verify that a module to unload was previously loaded by SystemTap, which allows local users to cause a denial of service (unloading of arbitrary kernel modules).

The pipe_fcntl function in fs/pipe.c in the Linux kernel before 2.6.37 does not properly determine whether a file is a named pipe, which allows local users to cause a denial of service via an F_SETPIPE_SZ fcntl call.

A Denial of Service due to Improper Input Validation vulnerability in the Management Console component of BlackBerry UEM version(s) 12.13.1 QF2 and earlier and 12.12.1a QF6 and earlier could allow an attacker to potentially to prevent any new user connections.

If the attacker manages to create files in the directory used to collect log files in supportutils before version 3.1-5.7.1 (e.g. with CVE-2018-19638) he can kill arbitrary processes on the local machine.

Some ZTE products have an input verification vulnerability in the diagnostic function interface. Due to insufficient verification of some parameters input by users, an attacker with high privileges can cause process exception by repeatedly inputting illegal parameters. This affects:<ZXONE 9700 , ZXONE 8700, ZXONE 19700><V1.40.021.021CP049, V1.0P02B219_@NCPM-RELEASE_2.40R1-20200914.set>

For the Central Licensing Server component used in ABB products ABB Ability™ System 800xA and related system extensions versions 5.1, 6.0 and 6.1, Compact HMI versions 5.1 and 6.0, Control Builder Safe 1.0, 1.1 and 2.0, Symphony Plus -S+ Operations 3.0 to 3.2 Symphony Plus -S+ Engineering 1.1 to 2.2, Composer Harmony 5.1, 6.0 and 6.1, Melody Composer 5.3, 6.1/6.2 and SPE for Melody 1.0SPx (Composer 6.3), Harmony OPC Server (HAOPC) Standalone 6.0, 6.1 and 7.0, ABB Ability™ System 800xA/ Advant® OCS Control Builder A 1.3 and 1.4, Advant® OCS AC100 OPC Server 5.1, 6.0 and 6.1, Composer CTK 6.1 and 6.2, AdvaBuild 3.7 SP1 and SP2, OPCServer for MOD 300 (non-800xA) 1.4, OPC Data Link 2.1 and 2.2, Knowledge Manager 8.0, 9.0 and 9.1, Manufacturing Operations Management 1812 and 1909, ABB AbilityTM SCADAvantage versions 5.1 to 5.6.5, a weakness in validation of input exists that allows an attacker to block license handling by sending specially crafted messages to the CLS web service.