libclamav/untar.c in ClamAV before 0.95 allows remote attackers to cause a denial of service (infinite loop) via a crafted TAR file that causes (1) clamd and (2) clamscan to hang.
GDSDB infinite loop in Wireshark 4.0.0 to 4.0.5 and 3.6.0 to 3.6.13 allows denial of service via packet injection or crafted capture file
An issue was discovered in Exempi before 2.4.4. Integer overflow in the Chunk class in XMPFiles/source/FormatSupport/RIFF.cpp allows remote attackers to cause a denial of service (infinite loop) via crafted XMP data in a .avi file.
In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated---
QEMU (aka Quick Emulator) built with the ColdFire Fast Ethernet Controller emulator support is vulnerable to an infinite loop issue. It could occur while receiving packets in 'mcf_fec_receive'. A privileged user/process inside guest could use this issue to crash the QEMU process on the host leading to DoS.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-dcm.c had an infinite loop that was addressed by checking for integer wraparound.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-reload.c had an infinite loop that was addressed by validating a length.
In MuPDF 1.12.0, there is an infinite loop vulnerability and application hang in the pdf_parse_array function (pdf/pdf-parse.c) because EOF is not considered. Remote attackers could leverage this vulnerability to cause a denial of service via a crafted pdf file.
In Long Range Zip (aka lrzip) 0.631, there is an infinite loop and application hang in the get_fileinfo function (lrzip.c). Remote attackers could leverage this vulnerability to cause a denial of service via a crafted lrz file.
An error within the "parse_rollei()" function (internal/dcraw_common.cpp) within LibRaw versions prior to 0.19.1 can be exploited to trigger an infinite loop.
The Quagga BGP daemon (bgpd) prior to version 1.2.3 has a bug in its parsing of "Capabilities" in BGP OPEN messages, in the bgp_packet.c:bgp_capability_msg_parse function. The parser can enter an infinite loop on invalid capabilities if a Multi-Protocol capability does not have a recognized AFI/SAFI, causing a denial of service.
A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.
A flaw was found in the way HAProxy processed HTTP responses containing the "Set-Cookie2" header. This flaw could allow an attacker to send crafted HTTP response packets which lead to an infinite loop, eventually resulting in a denial of service condition. The highest threat from this vulnerability is availability.
An infinite loop in SMLLexer in Pygments versions 1.5 to 2.7.3 may lead to denial of service when performing syntax highlighting of a Standard ML (SML) source file, as demonstrated by input that only contains the "exception" keyword.
In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.
QEMU (aka Quick Emulator) built with the e1000 NIC emulation support is vulnerable to an infinite loop issue. It could occur while processing data via transmit or receive descriptors, provided the initial receive/transmit descriptor head (TDH/RDH) is set outside the allocated descriptor buffer. A privileged user inside guest could use this flaw to crash the QEMU instance resulting in DoS.
In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the phar uncompressor code would recursively uncompress "quines" gzip files, resulting in an infinite loop.
Infinite loop in the BitTorrent DHT dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file
TinyXML through 2.6.2 has an infinite loop in TiXmlParsingData::Stamp in tinyxmlparser.cpp via the TIXML_UTF_LEAD_0 case. It can be triggered by a crafted XML message and leads to a denial of service.
A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.
hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
An issue was discovered in ApiPageSet.php in MediaWiki before 1.35.12, 1.36.x through 1.39.x before 1.39.5, and 1.40.x before 1.40.1. It allows attackers to cause a denial of service (unbounded loop and RequestTimeoutException) when querying pages redirected to other variants with redirects and converttitles set.
hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop.
In Wireshark through 3.2.7, the Facebook Zero Protocol (aka FBZERO) dissector could enter an infinite loop. This was addressed in epan/dissectors/packet-fbzero.c by correcting the implementation of offset advancement.
ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (infinite loop or crash) by pointing the key file at the log file.
In coders/bmp.c in ImageMagick before 7.0.8-16, an input file can result in an infinite loop and hang, with high CPU and memory consumption. Remote attackers could leverage this vulnerability to cause a denial of service via a crafted file.
The process_tx_desc function in hw/net/e1000.c in QEMU before 2.4.0.1 does not properly process transmit descriptor data when sending a network packet, which allows attackers to cause a denial of service (infinite loop and guest crash) via unspecified vectors.
Infinite Loop in zziplib v0.13.69 allows remote attackers to cause a denial of service via the return value "zzip_file_read" in the function "unzzip_cat_file".
The ne2000_receive function in hw/net/ne2000.c in QEMU before 2.4.0.1 allows attackers to cause a denial of service (infinite loop and instance crash) or possibly execute arbitrary code via vectors related to receiving packets.
Integer overflow in the VNC display driver in QEMU before 2.1.0 allows attachers to cause a denial of service (process crash) via a CLIENT_CUT_TEXT message, which triggers an infinite loop.
Designate does not enforce the DNS protocol limit concerning record set sizes
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-rpki-rtr.c had an infinite loop that was addressed by validating a length field.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-ber.c had an infinite loop that was addressed by validating a length.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-sccp.c had an infinite loop that was addressed by using a correct integer data type.
In GraphicsMagick 1.3.27, there is an infinite loop and application hang in the ReadBMPImage function (coders/bmp.c). Remote attackers could leverage this vulnerability to cause a denial of service via an image file with a crafted bit-field mask value.
gd_gif_in.c in the GD Graphics Library (aka libgd), as used in PHP before 5.6.33, 7.0.x before 7.0.27, 7.1.x before 7.1.13, and 7.2.x before 7.2.1, has an integer signedness error that leads to an infinite loop via a crafted GIF file, as demonstrated by a call to the imagecreatefromgif or imagecreatefromstring PHP function. This is related to GetCode_ and gdImageCreateFromGifCtx.
libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.
Crash in DNP dissector in Wireshark 3.4.0 to 3.4.6 and 3.2.0 to 3.2.14 allows denial of service via packet injection or crafted capture file
Infinite loop in DVB-S2-BB dissector in Wireshark 3.4.0 to 3.4.5 allows denial of service via packet injection or crafted capture file
imagemagick 6.8.9.6 has remote DOS via infinite loop
GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user's process (e.g., a system backup running as root).
A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
In Artifex MuPDF 1.14.0, there is an infinite loop in the function svg_dev_end_tile in fitz/svg-device.c, as demonstrated by mutool.
An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
In Wireshark 2.6.0 to 2.6.4 and 2.4.0 to 2.4.10, the MMSE dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-mmse.c by preventing length overflows.
In Wireshark 3.2.0 to 3.2.7, the GQUIC dissector could crash. This was addressed in epan/dissectors/packet-gquic.c by correcting the implementation of offset advancement.
In Exiv2 0.26, Exiv2::PsdImage::readMetadata in psdimage.cpp in the PSD image reader may suffer from a denial of service (infinite loop) caused by an integer overflow via a crafted PSD image file.
xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.
PJSIP is a free and open source multimedia communication library written in the C language. Versions 2.12 and prior contain a denial-of-service vulnerability that affects PJSIP users that consume PJSIP's XML parsing in their apps. Users are advised to update. There are no known workarounds.
PyPDF2 is an open source python PDF library capable of splitting, merging, cropping, and transforming the pages of PDF files. In versions prior to 1.27.5 an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop if the PyPDF2 if the code attempts to get the content stream. The reason is that the last while-loop in `ContentStream._readInlineImage` only terminates when it finds the `EI` token, but never actually checks if the stream has already ended. This issue has been resolved in version `1.27.5`. Users unable to upgrade should validate and PDFs prior to iterating over their content stream.