PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices contain a hardcoded certificate (and key) that is used by default for web-based services on the device. Impersonation, man-in-the-middle, or passive decryption attacks are possible if the generic certificate is not replaced by a device-specific certificate during installation.
On Phoenix Contact PLCnext Control Devices versions before 2021.0 LTS an attacker can use the knowledge gained by reading the insufficiently protected sensitive information to plan further attacks.
The web server in Phoenix Contact ILC PLCs allows access to read and write PLC variables without authentication.
The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions prior to 1.35 is vulnerable to brute-force attacks, because of Improper Restriction of Excessive Authentication Attempts.
All Phoenix Contact managed FL SWITCH 3xxx, 4xxx, 48xx products running firmware version 1.0 to 1.33 allow reading the configuration file by an unauthenticated user.
An Information Exposure issue was discovered in PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, and 48xxx Series products running firmware Version 1.0 to 1.32. A remote unauthenticated attacker may be able to use Monitor Mode on the device to read diagnostic information.
Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: JCE). Supported versions that are affected are Java SE: 7u141 and 8u131; Java SE Embedded: 8u131; JRockit: R28.3.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Java SE, Java SE Embedded, JRockit accessible data. Note: This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).
Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: JCE). Supported versions that are affected are Java SE: 6u151, 7u141 and 8u131; Java SE Embedded: 8u131; JRockit: R28.3.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Java SE, Java SE Embedded, JRockit accessible data. Note: This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).
The web server in Phoenix Contact ILC PLCs can be accessed without authenticating even if the authentication mechanism is enabled.
The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions 1.0 to 1.34 leaks private information in firmware images.
The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions 1.0 to 1.34 allows for plaintext transmission (HTTP) of user credentials by default.
Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Security). Supported versions that are affected are Java SE: 7u141 and 8u131; Java SE Embedded: 8u131; JRockit: R28.3.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Java SE, Java SE Embedded, JRockit accessible data. Note: This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).
In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.7 the filename parameter is vulnerable to unauthenticated path traversal attacks, enabling read access to arbitrary files on the server.
Encryption key exposure in firmware in iSmartAlarm CubeOne version 2.2.4.8 and earlier allows attackers to decrypt log files via an exposed key.
IBL Online Weather before 4.3.5a allows attackers to obtain sensitive information by reading the IWEBSERVICE_JSONRPC_COOKIE cookie.
A vulnerability has been found in SourceCodester Student Result Management System 1.0. Impacted is an unknown function of the file /login_credentials.txt of the component HTTP GET Request Handler. The manipulation leads to cleartext storage in a file or on disk. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.
TAIWAN SECOM CO., LTD., a Door Access Control and Personnel Attendance Management system, stores users’ information by cleartext in the cookie, which divulges password to attackers.
UltraLog Express device management software stores user’s information in cleartext. Any user can obtain accounts information through a specific page.
Universal Robots control box CB 3.1 across firmware versions (tested on 1.12.1, 1.12, 1.11 and 1.10) does not encrypt or protect in any way the intellectual property artifacts installed from the UR+ platform of hardware and software components (URCaps). These files (*.urcaps) are stored under '/root/.urcaps' as plain zip files containing all the logic to add functionality to the UR3, UR5 and UR10 robots. This flaw allows attackers with access to the robot or the robot network (while in combination with other flaws) to retrieve and easily exfiltrate all installed intellectual property.
SonarQube 8.4.2.36762 allows remote attackers to discover cleartext SMTP, SVN, and GitLab credentials via the api/settings/values URI. NOTE: reportedly, the vendor's position for SMTP and SVN is "it is the administrator's responsibility to configure it.
An issue was discovered in Aviatrix Controller before R5.3.1151. Encrypted key values are stored in a readable file.
An issue was discovered in Xuperchain 3.6.0 that allows for attackers to recover any arbitrary users' private key after obtaining the partial signature in multisignature.
An information disclosure vulnerability exists in the EPA protocol of Dut Computer Control Engineering Co.'s PLC MAC1100.
django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database.
An issue was discovered on Nescomed Multipara Monitor M1000 devices. The internal storage of the underlying Linux system stores data in cleartext, without integrity protection against tampering.
A vulnerability has been identified in Spectrum Power 4 (All versions < V4.70 SP8). Insecure storage of sensitive information in the configuration files could allow the retrieval of user names.
Brocade SANNav before version 2.1.1 contains an information disclosure vulnerability. Successful exploitation of internal server information in the initial login response header.
An issue was discovered in URVE Build 24.03.2020. The password of an integration user account (used for the connection of the MS Office 365 Integration Service) is stored in cleartext in configuration files as well as in the database. The following files contain the password in cleartext: Profiles/urve/files/sql_db.backup, Server/data/pg_wal/000000010000000A000000DD, Server/data/base/16384/18617, and Server/data/base/17202/8708746. This causes the password to be displayed as cleartext in the HTML code as roomsreservationimport_password in /urve/roomsreservationimport/roomsreservationimport/update-HTML5.
D-Link DIR-865L Ax 1.20B01 Beta devices have Cleartext Storage of Sensitive Information.
An issue was discovered in Navigate CMS 2.9 r1433. Sessions, as well as associated information such as CSRF tokens, are stored in cleartext files in the directory /private/sessions. An unauthenticated user could use a brute-force approach to attempt to identify existing sessions, or view the contents of this file to discover details about a session.
An issue was discovered in the stashcat app through 3.9.2 for macOS, Windows, Android, iOS, and possibly other platforms. It stores the client_key, the device_id, and the public key for end-to-end encryption in cleartext, enabling an attacker (by copying or having access to the local storage database file) to login to the system from any other computer, and get unlimited access to all data in the users's context.
Users can lock their notes with a password in Memono version 3.8. Thus, users needs to know a password to read notes. However, these notes are stored in a database without encryption and an attacker can read the password-protected notes without having the password. Notes are stored in the ZENTITY table in the memono.sqlite database.
Unnecessary fields in the OpenTrace/BlueTrace protocol in COVIDSafe through v1.0.17 allow a remote attacker to identify a device model by observing cleartext payload data. This allows re-identification of devices, especially less common phone models or those in low-density situations.
If LibreOffice has an encrypted document open and crashes, that document is auto-saved encrypted. On restart, LibreOffice offers to restore the document and prompts for the password to decrypt it. If the recovery is successful, and if the file format of the recovered document was not LibreOffice's default ODF file format, then affected versions of LibreOffice default that subsequent saves of the document are unencrypted. This may lead to a user accidentally saving a MSOffice file format document unencrypted while believing it to be encrypted. This issue affects: LibreOffice 6-3 series versions prior to 6.3.6; 6-4 series versions prior to 6.4.3.
The DLink Router DIR-895L MFC v1.21b05 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.
IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores sensitive information in cleartext within a resource that might be accessible to another control sphere. IBM X-Force ID: 1610141.
In JetBrains PyCharm 2019.2.5 and 2019.3 on Windows, Apple Notarization Service credentials were included. This is fixed in 2019.2.6 and 2019.3.3.
MiR controllers across firmware versions 2.8.1.1 and before do not encrypt or protect in any way the intellectual property artifacts installed in the robots. This flaw allows attackers with access to the robot or the robot network (while in combination with other flaws) to retrieve and easily exfiltrate all installed intellectual property and data.
The AD Helper component in WatchGuard Fireware before 5.8.5.10317 allows remote attackers to discover cleartext passwords via the /domains/list URI.
TYPO3 is an open source PHP based web content management system. In TYPO3 before versions 9.5.23 and 10.4.10 user session identifiers were stored in cleartext - without processing with additional cryptographic hashing algorithms. This vulnerability cannot be exploited directly and occurs in combination with a chained attack - like for instance SQL injection in any other component of the system. Update to TYPO3 versions 9.5.23 or 10.4.10 that fix the problem described.
In several versions of JetBrains IntelliJ IDEA Ultimate, creating Task Servers configurations leads to saving a cleartext unencrypted record of the server credentials in the IDE configuration files. The issue has been fixed in the following versions: 2019.1, 2018.3.5, 2018.2.8, and 2018.1.8.
In several JetBrains IntelliJ IDEA versions, creating remote run configurations of JavaEE application servers leads to saving a cleartext record of the server credentials in the IDE configuration files. The issue has been fixed in the following versions: 2018.3.5, 2018.2.8, 2018.1.8.
An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. The application's configuration file contains parameters that represent passwords in cleartext.
Cisco Linksys E4200 1.0.05 Build 7 devices store passwords in cleartext allowing remote attackers to obtain sensitive information.
IMail stores usernames and passwords in cleartext in a cookie, which allows remote attackers to obtain sensitive information.
GitLab EE 8.4 through 12.5, 12.4.3, and 12.3.6 stored several tokens in plaintext.
In MobaTek MobaXterm Personal Edition v11.1 Build 3860, the SSH private key and its password can be retrieved from process memory for the lifetime of the process, even after the user disconnects from the remote SSH server. This affects Passwordless Authentication that has a Password Protected SSH Private Key.
On Xerox AltaLink B8045/B8055/B8065/B8075/B8090 and C8030/C8035/C8045/C8055/C8070 multifunction printers with software releases before 101.00x.099.28200, portions of the drive containing executable code were not encrypted thus leaving it open to potential cryptographic information disclosure.
Fronius Solar Inverter devices before 3.14.1 (HM 1.12.1) allow attackers to bypass authentication because the password for the today account is stored in the /tmp/web_users.conf file.