A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to retrieve memory contents, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks in the part of the code that handles CAPWAP keepalive requests. An attacker could exploit this vulnerability by sending a crafted CAPWAP keepalive packet to a vulnerable Cisco WLC device. A successful exploit could allow the attacker to retrieve the contents of device memory, which could lead to the disclosure of confidential information.

On the OSNEXUS QuantaStor v4 virtual appliance before 4.3.1, a flaw was found with the error message sent as a response for users that don't exist on the system. An attacker could leverage this information to fine-tune and enumerate valid accounts on the system by searching for common usernames.

ClanSphere 2010.0 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by mods/board/attachment.php.

baserCMS (baserCMS 4.1.0.1 and earlier versions, baserCMS 3.0.15 and earlier versions) allows remote attackers to bypass access restriction in mail form to view a file which is uploaded by a site user via unspecified vectors.

Hesk 2.2 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by inc/footer.inc.php and certain other files.

kPlaylist 1.8.502 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by getid3/getid3/write.id3v1.php and certain other files.

Android SQLite Journal before 4.0.1 has an information disclosure vulnerability.

Freeway 1.5 Alpha allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by templates/Freeway/boxes/last_product.php and certain other files.

ka-Map 1.0-20070205 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by test.php and certain other files.

Cisco Content Delivery System Manager Software 3.2 on Videoscape Distribution Suite Service Manager allows remote attackers to obtain sensitive information via crafted URLs in REST API requests, aka Bug ID CSCuv86960.

Trend Micro Internet Security 8 and 10 allows remote attackers to read arbitrary files via unspecified vectors.

CA Identity Manager r12.6 to r12.6 SP8, 14.0, and 14.1 allows remote attackers to potentially identify passwords of locked accounts through an exhaustive search.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not include the HTTPOnly flag in a Set-Cookie header for administration applications, which makes it easier for remote attackers to obtain potentially sensitive information via script access to cookies.

Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows remote attackers to read files via a crafted HTTP request, aka Bug ID CSCux10608.

In SAP Business Objects Business Intelligence Platform, before versions 4.1, 4.2 and 4.3, some dynamic pages (like jsp) are cached, which leads to an attacker can see the sensitive information via cache and can open the dynamic pages even after logout.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not set the secure flag for cookies in an https session to an administration application, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover a CM MAC address by sniffing Wi-Fi traffic and performing simple arithmetic calculations.

WSN Software 6.0.6 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by includes/prestart.php and certain other files.

MantisBT 1.2.4 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by view_all_inc.php and certain other files.

A Disclosure of Sensitive Information vulnerability in HPE SiteScope version v11.2x, v11.3x was found.

Joomla! 1.6.x before 1.6.2 allows remote attackers to obtain sensitive information via an empty Itemid array parameter to index.php, which reveals the installation path in an error message, a different vulnerability than CVE-2011-2488.

IceWarp WebMail in IceWarp Mail Server before 10.3.3 allows remote attackers to obtain configuration information via a direct request to the /server URI, which triggers a call to the phpinfo function.

The web server in Cogent DataHub 7.1.1.63 and earlier allows remote attackers to obtain the source code of executable files via a request with a trailing (1) space or (2) %2e (encoded dot).

A vulnerability in SonicOS where the HTTP server response leaks partial memory by sending a crafted HTTP request, this can potentially lead to an internal sensitive data disclosure vulnerability.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to compute password-of-the-day values via unspecified vectors.

MediaCAST 8 and earlier does not properly handle requests for inventivex/isptools/release/metadata/globalIncludeFolders.txt, which allows remote attackers to obtain sensitive information via unspecified vectors related to the Public/ directory tree.

Debug information disclosure exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. A direct request to cgi-bin/HASync/hasync.cgi?debug=1 shows Master LAN Address, Serial Number, HA Group ID, Virtual IP, and Submitted syncid.

MediaWiki before 1.27.4, 1.28.x before 1.28.3, and 1.29.x before 1.29.2, when a private wiki is configured, provides different error messages for failed login attempts depending on whether the username exists, which allows remote attackers to enumerate account names and conduct brute-force attacks via a series of requests.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices sets the CM MAC address to a value with a two-byte offset from the MTA/VoIP MAC address, which indirectly allows remote attackers to discover hidden Home Security Wi-Fi networks by leveraging the embedding of the MTA/VoIP MAC address into the DNS hostname.

An issue was discovered in Mattermost Server before 3.2.0. The initial_load API disclosed unnecessary personal information.

The mostActiveCommitters.do resource in Atlassian Fisheye and Crucible, before version 4.4.1 allows anonymous remote attackers to access sensitive information, for example email addresses of committers, as it lacked permission checks.

IDM 4.6 Identity Applications prior to 4.6.2.1 may expose sensitive information.

ArubaOS, all versions prior to 6.3.1.25, 6.4 prior to 6.4.4.16, 6.5.x prior to 6.5.1.9, 6.5.2, 6.5.3 prior to 6.5.3.3, 6.5.4 prior to 6.5.4.2, 8.x prior to 8.1.0.4 FIPS and non-FIPS versions of software are both affected equally is vulnerable to unauthenticated arbitrary file access. An unauthenticated user with network access to an Aruba mobility controller on TCP port 8080 or 8081 may be able to access arbitrary files stored on the mobility controller. Ports 8080 and 8081 are used for captive portal functionality and are listening, by default, on all IP interfaces of the mobility controller, including captive portal interfaces. The attacker could access files which could contain passwords, keys, and other sensitive information that could lead to full system compromise.

The ThemeMakers SmartIT Premium Responsive theme through 2015-05-15 for WordPress allows remote attackers to obtain sensitive information (such as user_login, user_pass, and user_email values) via a direct request for the wp-content/uploads/tmm_db_migrate/wp_users.dat URI.

Information disclosure of .esp source code on the Cohu 3960 allows an attacker to view sensitive information such as application logic with a simple web browser.

An information disclosure vulnerability in the BlackBerry Workspaces Server could result in an attacker gaining access to source code for server-side applications by crafting a request for specific files.

Some NetIQ Identity Manager Applications before Identity Manager 4.5.6.1 included the session token in GET URLs, potentially allowing exposure of user sessions to untrusted third parties via proxies, referer urls or similar.

A password management vulnerability in Fortinet FortiPortal versions 4.0.0 and below allows an attacker to carry out information disclosure via the FortiAnalyzer Management View.

An issue was discovered in Personify360 e-Business 7.5.2 through 7.6.1. When going to the /TabId/275 URI, it is possible to read any customer name, master Customer Id, and email address. In other words, anyone can search for users/customers in the system - no authentication is required.

In Joomla! 3.4.0 through 3.6.5 (fixed in 3.7.0), multiple files caused full path disclosures on systems with enabled error reporting.

In Joomla! 1.5.0 through 3.6.5 (fixed in 3.7.0), mail sent using the JMail API leaked the used PHPMailer version in the mail headers.

NetApp OnCommand Unified Manager Core Package 5.x before 5.2.2P1 might allow remote attackers to obtain sensitive information via vectors involving error messages.

Apache OpenMeetings 1.0.0 displays Tomcat version and detailed error stack trace, which is not secure.

Apache Ignite 1.0.0-RC3 to 2.0 uses an update notifier component to update the users about new project releases that include additional functionality, bug fixes and performance improvements. To do that the component communicates to an external PHP server (http://ignite.run) where it needs to send some system properties like Apache Ignite or Java version. Some of the properties might contain user sensitive information.

QNAP Qfinder Pro 6.1.0.0317 and earlier may expose sensitive information contained in NAS devices. If exploited, this may allow attackers to further compromise the device.

Atlassian Confluence 6.x before 6.0.7 allows remote attackers to bypass authentication and read any blog or page via the drafts diff REST resource.

Moxa MXView 2.8 allows remote attackers to read web server's private key file, no access control.

The CFNetwork HTTPProtocol component in Apple iOS before 9 mishandles HSTS state, which allows remote attackers to bypass the Safari private-browsing protection mechanism and track users via a crafted web site.

An issue was discovered in the Cloud Controller API in Cloud Foundry Foundation CAPI-release versions after v1.6.0 and prior to v1.35.0 and cf-release versions after v244 and prior to v268. A carefully crafted CAPI request from a Space Developer can allow them to gain access to files on the Cloud Controller VM for that installation.

NetApp Clustered Data ONTAP before 8.3.2P11, 9.0 before P4, and 9.1 before P5 allow attackers to obtain sensitive password information by leveraging logging of passwords entered non-interactively on the command line.