The FLIC decoder in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (out-of-bounds write and crash) via a crafted series of skip and count pairs.

The flx_decode_chunks function in gst/flx/gstflxdec.c in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (invalid memory read and crash) via a crafted FLIC file.

The gst_decode_chain_free_internal function in the flxdex decoder in gst-plugins-good in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (invalid memory read and crash) via an invalid file, which triggers an incorrect unref call.

Off-by-one error in the gst_h264_parse_set_caps function in GStreamer before 1.10.2 allows remote attackers to have unspecified impact via a crafted file, which triggers an out-of-bounds read.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in gst_wavparse_adtl_chunk within gstwavparse.c. This vulnerability arises due to insufficient validation of the size parameter, which can exceed the bounds of the data buffer. As a result, an OOB read occurs in the following while loop. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_wavparse_smpl_chunk function within gstwavparse.c. This function attempts to read 4 bytes from the data + 12 offset without checking if the size of the data buffer is sufficient. If the buffer is too small, the function reads beyond its bounds. This vulnerability may result in reading 4 bytes out of the boundaries of the data buffer. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in qtdemux_parse_container function within qtdemux.c. In the parent function qtdemux_parse_node, the value of length is not well checked. So, if length is big enough, it causes the pointer end to point beyond the boundaries of buffer. Subsequently, in the qtdemux_parse_container function, the while loop can trigger an OOB-read, accessing memory beyond the bounds of buf. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been detected in the format_channel_mask function in gst-discoverer.c. The vulnerability affects the local array position, which is defined with a fixed size of 64 elements. However, the function gst_discoverer_audio_info_get_channels may return a guint channels value greater than 64. This causes the for loop to attempt access beyond the bounds of the position array, resulting in an OOB-read when an index greater than 63 is used. This vulnerability can result in reading unintended bytes from the stack. Additionally, the dereference of value->value_nick after the OOB-read can lead to further memory corruption or undefined behavior. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been found in the parse_ds64 function within gstwavparse.c. The parse_ds64 function does not check that the buffer buf contains sufficient data before attempting to read from it, doing multiple GST_READ_UINT32_LE operations without performing boundary checks. This can lead to an OOB-read when buf is smaller than expected. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in gst_wavparse_cue_chunk within gstwavparse.c. The vulnerability happens due to a discrepancy between the size of the data buffer and the size value provided to the function. This mismatch causes the comparison if (size < 4 + ncues * 24) to fail in some cases, allowing the subsequent loop to access beyond the bounds of the data buffer. The root cause of this discrepancy stems from a miscalculation when clipping the chunk size based on upstream data size. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_avi_subtitle_parse_gab2_chunk function within gstavisubtitle.c. The function reads the name_length value directly from the input file without checking it properly. Then, the a condition, does not properly handle cases where name_length is greater than 0xFFFFFFFF - 17, causing an integer overflow. In such scenario, the function attempts to access memory beyond the buffer leading to an OOB-read. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in the qtdemux_merge_sample_table function within qtdemux.c. The problem is that the size of the stts buffer isn’t properly checked before reading stts_duration, allowing the program to read 4 bytes beyond the boundaries of stts->data. This vulnerability reads up to 4 bytes past the allocated bounds of the stts array. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been detected in the function qtdemux_parse_samples within qtdemux.c. This issue arises when the function qtdemux_parse_samples reads data beyond the boundaries of the stream->stco buffer. The following code snippet shows the call to qt_atom_parser_get_offset_unchecked, which leads to the OOB-read when parsing the provided GHSL-2024-245_crash1.mp4 file. This issue may lead to read up to 8 bytes out-of-bounds. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in the qtdemux_parse_svq3_stsd_data function within qtdemux.c. In the FOURCC_SMI_ case, seqh_size is read from the input file without proper validation. If seqh_size is greater than the remaining size of the data buffer, it can lead to an OOB-read in the following call to gst_buffer_fill, which internally uses memcpy. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10.

The windows_icon_typefind function in gst-plugins-base in GStreamer before 1.10.2, when G_SLICE is set to always-malloc, allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted ico file.

It is possible for an unauthenticated remote DCOM websocket connection to crash the Command Centre service due to an out-of-bounds buffer access. Affected versions are v8.20 prior to v8.20.1166(MR3), v8.10 prior to v8.10.1211(MR5), v8.00 prior to v8.00.1228(MR6), all versions of 7.90 and earlier.

On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a malformed DHCPv6 packet is received, resulting with the restart of the daemon. This issue only affects DHCPv6, it does not affect DHCPv4. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.2 version 19.2R2 and later versions; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; This issue does not affect Juniper Networks Junos OS prior to 17.4R1.

In FreeRDP before 2.1.0, there is an out-of-bounds read in cliprdr_read_format_list. Clipboard format data read (by client or server) might read data out-of-bounds. This has been fixed in 2.1.0.

IPv6 function in Huawei Quidway S2700 V200R003C00SPC300, Quidway S5300 V200R003C00SPC300, Quidway S5700 V200R003C00SPC300, S2300 V200R003C00, V200R003C00SPC300T, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S2700 V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S5300 V200R003C00, V200R003C00SPC300T, V200R003C00SPC600, V200R003C02, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R005C05, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S5700 V200R003C00, V200R003C00SPC316T, V200R003C00SPC600, V200R003C02, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S600-E V200R008C00, V200R009C00, S6300 V200R003C00, V200R005C00, V200R007C00, V200R008C00, V200R009C00, S6700 V200R003C00, V200R005C00, V200R005C01, V200R005C02, V200R007C00, V200R008C00, V200R009C00 has an out-of-bounds read vulnerability. An unauthenticated attacker may send crafted malformed IPv6 packets to the affected products. Due to insufficient verification of the packets, successful exploit will cause device to reset.

In nDPI through 3.2, the Oracle protocol dissector has a heap-based buffer over-read in ndpi_search_oracle in lib/protocols/oracle.c.

LuaJit through 2.1.0-beta3 has an out-of-bounds read because __gc handler frame traversal is mishandled.

In Tensorflow before version 2.4.0, an attacker can pass an invalid `axis` value to `tf.quantization.quantize_and_dequantize`. This results in accessing a dimension outside the rank of the input tensor in the C++ kernel implementation. However, dim_size only does a DCHECK to validate the argument and then uses it to access the corresponding element of an array. Since in normal builds, `DCHECK`-like macros are no-ops, this results in segfault and access out of bounds of the array. The issue is patched in eccb7ec454e6617738554a255d77f08e60ee0808 and TensorFlow 2.4.0 will be released containing the patch. TensorFlow nightly packages after this commit will also have the issue resolved.

The Server-Server protocol implementation in ngIRCd before 26~rc2 allows an out-of-bounds access, as demonstrated by the IRC_NJOIN() function.

A denial of service vulnerability exists in some Xiaomi models of phones. The vulnerability is caused by out-of-bound read/write and can be exploited by attackers to make denial of service.

An issue was discovered in Contiki through 3.0. An Out-of-Bounds Read vulnerability exists in the uIP TCP/IP Stack component when calculating the checksums for IP packets in upper_layer_chksum in net/ipv4/uip.c.

Google Chrome before 16.0.912.63 does not properly handle PDF documents, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

Buffer over-read while processing NDL attribute if attribute length is larger than expected and then FW is treating it as more number of immutable schedules in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking

Google Chrome before 17.0.963.46 does not properly handle PDF FAX images, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

In Dovecot before 2.3.11.3, sending a specially formatted RPA request will crash the auth service because a length of zero is mishandled.

Google Chrome before 15.0.874.120 does not properly implement the MKV and Vorbis media handlers, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

Google Chrome before 14.0.835.163 does not properly handle Khmer characters, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

In Dovecot before 2.3.11.3, sending a specially formatted NTLM request will crash the auth service because of an out-of-bounds read.

In nDPI through 3.2 Stable, an out-of-bounds read in concat_hash_string in ssh.c can be exploited by a network-positioned attacker that can send malformed SSH protocol messages on a network segment monitored by nDPI's library.

SCCPX module in Huawei DP300 V500R002C00; RP200 V500R002C00; V600R006C00; TE30 V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C10; V500R002C00; V600R006C00 has an out-of-bounds read vulnerability. An unauthenticated, remote attacker crafts malformed packets with specific parameter to the affected products. Due to insufficient validation of packets, successful exploitation may impact availability of product service.

Google Chrome before 14.0.835.163 does not properly handle triangle arrays, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

In FreeRDP less than or equal to 2.0.0, there is an out-of-bounds read in rfx_process_message_tileset. Invalid data fed to RFX decoder results in garbage on screen (as colors). This has been patched in 2.1.0.

Google Chrome before 9.0.597.107 on 64-bit Linux platforms does not properly perform pickle deserialization, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

Google Chrome before 10.0.648.127 on Linux does not properly handle Unicode ranges, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

MediaTek microchips, as used in NETGEAR devices through 2021-11-11 and other devices, mishandle the WPS (Wi-Fi Protected Setup) protocol. (Affected Chipsets MT7603E, MT7610, MT7612, MT7613, MT7615, MT7620, MT7622, MT7628, MT7629, MT7915; Affected Software Versions 7.4.0.0; Out-of-bounds read).

Buffer over-read while parsing RPS due to lack of check of input validation on values received from user side. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile

The WebGL implementation in Google Chrome before 9.0.597.107 allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors, aka Issue 71717.

Google Chrome before 9.0.597.94 does not properly handle plug-ins, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.