A local information disclosure issue was found in dracut before 045 when generating initramfs images with world-readable permissions when 'early cpio' is used, such as when including microcode updates. Local attacker can use this to obtain sensitive information from these files, such as encryption keys or credentials.

An elevation of privilege vulnerability exists when NTFS improperly checks access, aka "NTFS Elevation of Privilege Vulnerability." This affects Windows 7, Windows Server 2012 R2, Windows RT 8.1, Windows Server 2008, Windows Server 2019, Windows Server 2012, Windows 8.1, Windows Server 2016, Windows Server 2008 R2, Windows 10, Windows 10 Servers.

\ProgramData\WebLog Expert\WebServer\WebServer.cfg in WebLog Expert Web Server Enterprise 9.4 has weak permissions (BUILTIN\Users:(ID)C), which allows local users to set a cleartext password and login as admin.

Anne-AL00 Huawei phones with versions earlier than 8.0.0.151(C00) have an information leak vulnerability. Due to improper permission settings for specific commands, attackers who can connect to a mobile phone via the USB interface may exploit this vulnerability to obtain specific device information of the mobile phone.

An issue was discovered in an npm 5.7.0 2018-02-21 pre-release (marked as "next: 5.7.0" and therefore automatically installed by an "npm upgrade -g npm" command, and also announced in the vendor's blog without mention of pre-release status). It might allow local users to bypass intended filesystem access restrictions because ownerships of /etc and /usr directories are being changed unexpectedly, related to a "correctMkdir" issue.

An issue was discovered in MalwareFox AntiMalware 2.74.0.150. Improper access control in zam32.sys and zam64.sys allows a non-privileged process to register itself with the driver by sending IOCTL 0x80002010 and then using IOCTL 0x8000204C to \\.\ZemanaAntiMalware to elevate privileges.

A vulnerability has been found in Heimdal PRO v2.2.190, but it is most likely also present in Heimdal FREE and Heimdal CORP. Faulty permissions on the directory "C:\ProgramData\Heimdal Security\Heimdal Agent" allow BUILTIN\Users to write new files to the directory. On startup, the process Heimdal.MonitorServices.exe running as SYSTEM will attempt to load version.dll from this directory. Placing a malicious version.dll in this directory will result in privilege escalation. NOTE: any affected Heimdal products are completely unrelated to the Heimdal vendor of a Kerberos 5 product on the h5l.org web site.

Voltronic Power ViewPower Incorrect Permission Assignment Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Voltronic Power ViewPower. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the product installer. The issue results from incorrect permissions set on folders. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-22025.

On F5 BIG-IP 13.0.0-13.0.1, 12.1.0-12.1.3.3, 11.6.0-11.6.3.1, or 11.5.1-11.5.6, Enterprise Manager 3.1.1, BIG-IQ Centralized Management 5.0.0-5.1.0, BIG-IQ Cloud and Orchestration 1.0.0, or F5 iWorkflow 2.1.0-2.3.0 the big3d process does not irrevocably minimize group privileges at start up.

NVIDIA Jetson TX2 contains a vulnerability in the kernel driver where input/output control (IOCTL) handling for user mode requests could create a non-trusted pointer dereference, which may lead to information disclosure, denial of service, escalation of privileges, or code execution. The updates apply to all versions prior to R28.3.

A permissions issue existed in which execute permission was incorrectly granted. This issue was addressed with improved permission validation. This issue affected versions prior to macOS High Sierra 10.13.4.

In Medtronic Valleylab FT10 Energy Platform (VLFT10GEN) version 2.1.0 and lower and version 2.0.3 and lower, and Valleylab LS10 Energy Platform (VLLS10GEN—not available in the United States) version 1.20.2 and lower, the RFID security mechanism does not apply read protection, allowing for full read access of the RFID security mechanism data.

Improper directory permissions in the installer for the Intel Parallel Studio before 2019 Gold may allow authenticated users to potentially enable an escalation of privilege via local access.

extenua SilverSHielD 6.x fails to secure its ProgramData folder, leading to a Local Privilege Escalation to SYSTEM. The attacker must replace SilverShield.config.sqlite with a version containing an additional user account, and then use SSH and port forwarding to reach a 127.0.0.1 service.

cPanel before 71.9980.37 allows arbitrary file-read operations during pkgacct custom template handling (SEC-435).

An issue was discovered in Microvirt MEmu 6.0.6. The MemuService.exe service binary is vulnerable to local privilege escalation through binary planting due to insecure permissions set at install time. This allows code to be run as NT AUTHORITY/SYSTEM.

cPanel before 68.0.27 allows attackers to read the SRS secret via exim.conf (SEC-308).

The Code42 app before 6.8.4, as used in Code42 for Enterprise, on Linux installs with overly permissive permissions on the /usr/local/crashplan/log directory. This allows a user to manipulate symbolic links to escalate privileges, or show the contents of sensitive files that a regular user would not have access to.

Improper sanitization of incoming intent in SecSettings prior to SMR MAY-2021 Release 1 allows local attackers to get permissions to access system uid data.

iBall Baton iB-WRB302N20122017 devices have improper access control over the UART interface, allowing physical attackers to discover Wi-Fi credentials (plain text) and the web-console password (base64) via the debugging console.

IBM Spectrum Protect 7.1 and 8.1 is affected by a password exposure vulnerability caused by insecure file permissions. IBM X-Force ID: 148872.

Crossroads 2.81 does not properly handle the /tmp directory during a build of xr. A local attacker can first create a world-writable subdirectory in a certain location under the /tmp directory, wait until a user process copies xr there, and then replace the entire contents of this subdirectory to include a Trojan horse xr.

Improper file permissions in the installer for Intel VTune Amplifier 2018 Update 3 and before may allow unprivileged user to potentially gain privileged access via local access.

Improper directory permissions in installer for Intel(R) Media SDK before 2018 R2.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

Improper directory permissions in Intel Solid State Drive Toolbox before 3.5.7 may allow an authenticated user to potentially enable escalation of privilege via local access.

KioWare Server version 4.9.6 and older installs by default to "C:\kioware_com" with weak folder permissions granting any user full permission "Everyone: (F)" to the contents of the directory and it's sub-folders. In addition, the program installs a service called "KWSService" which runs as "Localsystem", this will allow any user to escalate privileges to "NT AUTHORITY\SYSTEM" by substituting the service's binary with a malicious one.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. /mnt/mtd/boot.sh has 0777 permissions, allowing local users to control the commands executed at system start-up.

A vulnerability in the storage of proxy server credentials of Cisco Firepower Management Center (FMC) could allow an authenticated, local attacker to view credentials for a configured proxy server. The vulnerability is due to clear-text storage and weak permissions of related configuration files. An attacker could exploit this vulnerability by accessing the CLI of the affected software and viewing the contents of the affected files. A successful exploit could allow the attacker to view the credentials that are used to access the proxy server.

Privilege escalation can occur in the SUSE useradd.c code in useradd, as distributed in the SUSE shadow package through 4.2.1-27.9.1 for SUSE Linux Enterprise 12 (SLE-12) and through 4.5-5.39 for SUSE Linux Enterprise 15 (SLE-15). Non-existing intermediate directories are created with mode 0777 during user creation. Given that they are world-writable, local attackers might use this for privilege escalation and other unspecified attacks. NOTE: this would affect non-SUSE users who took useradd.c code from a 2014-04-02 upstream pull request; however, no non-SUSE distribution is known to be affected.

Ingenico Telium 2 POS Telium2 OS allow bypass of file-reading restrictions via the NTPT3 protocol. This is fixed in Telium 2 SDK v9.32.03 patch N.

Seqrite End Point Security v7.4 has "Everyone: (F)" permission for %PROGRAMFILES%\Seqrite\Seqrite, which allows local users to gain privileges by replacing an executable file with a Trojan horse.

A postinstall script in the dovecot rpm allows local users to read the contents of newly created SSL/TLS key files.

An issue was discovered in the Self Service Portal in Zoho ManageEngine Desktop Central before 10.0.282. A clickable company logo in a window running as SYSTEM can be abused to escalate privileges. In cloud, the issue is fixed in 10.0.470 agent version.

A permissions flaw was found in redis, which sets weak permissions on certain files and directories that could potentially contain sensitive information. A local, unprivileged user could possibly use this flaw to access unauthorized system information.

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop Parallels Desktop 17.1.1. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the update machanism. The product sets incorrect permissions on sensitive files. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-16395.

The Microsoft Windows Installer for Atlassian Fisheye and Crucible before version 4.6.1 allows local attackers to escalate privileges because of weak permissions on the installation directory.

In Apache Hadoop versions 2.6.1 to 2.6.5, 2.7.0 to 2.7.3, and 3.0.0-alpha1, if a file in an encryption zone with access permissions that make it world readable is localized via YARN's localization mechanism, that file will be stored in a world-readable location and can be shared freely with any application that requests to localize that file.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Exposing the hashed content in /etc/passwd may lead to security issue.

A vulnerability has been identified in SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V10, V11, V12 (All versions), SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V13 (All versions < V13 SP2 Update 2), SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V14 (All versions < V14 SP1 Update 6), SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V15 (All versions < V15 Update 2). Improper file permissions in the default installation of TIA Portal may allow an attacker with local file system access to insert specially crafted files which may prevent TIA Portal startup (Denial-of-Service) or lead to local code execution. No special privileges are required, but the victim needs to attempt to start TIA Portal after the manipulation.

A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The macOS binary openvpn_launcher.64 is setuid root. This binary creates /tmp/pia_upscript.sh when executed. Because the file creation mask (umask) is not reset, the umask value is inherited from the calling process. This value can be manipulated to cause the privileged binary to create files with world writable permissions. A local unprivileged user can modify /tmp/pia_upscript.sh during the connect process to execute arbitrary code as the root user.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /cache/ which presents a potential issue.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /persist/ which presents a potential issue.

Incorrect Permission Assignment on the /var/www/xms/cleanzip.sh shell script run periodically in Dialogic PowerMedia XMS through 3.5 allows local users to execute code as the root user.

This vulnerability allows local attackers to escalate privileges on vulnerable installations of ABB MicroSCADA 9.3 with FP 1-2-3. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the configuration of the access controls for the installed product files. The installation procedure leaves critical files open to manipulation by any authenticated user. An attacker can leverage this vulnerability to escalate privileges to SYSTEM. Was ZDI-CAN-5097.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /data/ which presents a potential issue.

Privilege escalation in file permissions in Intel Driver and Support Assistant before 3.5.0.1 may allow an authenticated user to potentially execute code as administrator via local access.

Insufficient access control in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables a privileged user to read device configuration information via local access.

Directory permissions in the Intel OpenVINO Toolkit for Windows before version 2018.1.265 may allow an authenticated user to potentially execute code using default directory permissions via local access.

Privilege escalation in file permissions in Intel Computing Improvement Program before version 2.2.0.03942 may allow an authenticated user to potentially execute code as administrator via local access.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper configuration of dev nodes may lead to potential security issue.