The Dynamic Host Configuration Protocol (DHCP) relay subsystem of Cisco IOS and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system.
Apply updates per vendor instructions.
A vulnerability in the content scanning and message filtering features of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to overwrite arbitrary files on the underlying operating system. This vulnerability is due to improper handling of email attachments when file analysis and content filters are enabled. An attacker could exploit this vulnerability by sending an email that contains a crafted attachment through an affected device. A successful exploit could allow the attacker to replace any file on the underlying file system. The attacker could then perform any of the following actions: add users with root privileges, modify the device configuration, execute arbitrary code, or cause a permanent denial of service (DoS) condition on the affected device. Note: Manual intervention is required to recover from the DoS condition. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system with root privileges. These vulnerabilities exist because incoming HTTP packets are not properly checked for errors, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to overflow an internal buffer and execute arbitrary commands at the root privilege level.
A privilege escalation issue in Cisco Unified IP Conference Station 7937G 1-4-4-0 through 1-4-5-7 allows attackers to reset the credentials for the SSH administrative console to arbitrary values. Note: We cannot prove this vulnerability exists. Out of an abundance of caution, this CVE is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. For more information on this, and how to upgrade, refer to the CVE’s reference information
A vulnerability in Cisco Smart Licensing Utility (CSLU) could allow an unauthenticated, remote attacker to log into an affected system by using a static administrative credential. This vulnerability is due to an undocumented static user credential for an administrative account. An attacker could exploit this vulnerability by using the static credentials to login to the affected system. A successful exploit could allow the attacker to login to the affected system with administrative rights over the CSLU application API.
A vulnerability in the web-based management interface of Cisco Unity Connection could allow an unauthenticated, remote attacker to upload arbitrary files to an affected system and execute commands on the underlying operating system. This vulnerability is due to a lack of authentication in a specific API and improper validation of user-supplied data. An attacker could exploit this vulnerability by uploading arbitrary files to an affected system. A successful exploit could allow the attacker to store malicious files on the system, execute arbitrary commands on the operating system, and elevate privileges to root.
Cisco Small Business 220 devices with firmware before 1.0.1.1 have a hardcoded SNMP community, which allows remote attackers to read or modify SNMP objects by leveraging knowledge of this community, aka Bug ID CSCuz76216.
The Tomcat Web Management feature in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 does not properly configure Tomcat components, which allows remote attackers to execute arbitrary code via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCub38384.
Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.
Cisco UCS Invicta C3124SA Appliance 4.3.1 through 5.0.1, UCS Invicta Scaling System and Appliance, and Whiptail Racerunner improperly store a default SSH private key, which allows remote attackers to obtain root access via unspecified vectors, aka Bug ID CSCun71294.
The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.
SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.
Cisco Network Admission Control (NAC) Appliance 3.5.x, 3.6.x before 3.6.4.4, 4.0.x before 4.0.6, and 4.1.x before 4.1.2 allows remote attackers to obtain the shared secret for the Clean Access Server (CAS) and Clean Access Manager (CAM) by sniffing error logs.
Cisco Application Velocity System (AVS) before 5.1.0 is installed with default passwords for some system accounts, which allows remote attackers to gain privileges.
Cisco Modular Encoding Platform D9036 Software before 02.04.70 has hardcoded (1) root and (2) guest passwords, which makes it easier for remote attackers to obtain access via an SSH session, aka Bug ID CSCut88070.
A vulnerability in the container management subsystem of Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and gain elevated privileges. This vulnerability is due to an insecure default configuration of the Kubernetes container management subsystem within DNA Center. An attacker who has the ability to access the Kubernetes service port could execute commands with elevated privileges within provisioned containers. A successful exploit could result in a complete compromise of affected containers. This vulnerability affects Cisco DNA Center Software Releases 1.1.3 and prior. Cisco Bug IDs: CSCvi47253.
SQL injection vulnerability in the web-based management interface on Cisco RV220W devices allows remote attackers to execute arbitrary SQL commands via a crafted header in an HTTP request, aka Bug ID CSCuv29574.
The Admin portal in Cisco Identity Services Engine (ISE) 1.1.x, 1.2.0 before patch 17, 1.2.1 before patch 8, 1.3 before patch 5, and 1.4 before patch 4 allows remote attackers to obtain administrative access via unspecified vectors, aka Bug ID CSCuw34253.
Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.
An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.
A vulnerability in the Cisco Prime File Upload servlet affecting multiple Cisco products could allow a remote attacker to upload arbitrary files to any directory of a vulnerable device (aka Path Traversal) and execute those files. This vulnerability affects the following products: Cisco Prime Data Center Network Manager (DCNM) Version 10.0 and later, and Cisco Prime Infrastructure (PI) All versions. Cisco Bug IDs: CSCvf32411, CSCvf81727.
The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.
The password-change feature in Cisco Unified MeetingPlace Web Conferencing before 8.5(5) MR3 and 8.6 before 8.6(2) does not check the session ID or require entry of the current password, which allows remote attackers to reset arbitrary passwords via a crafted HTTP request, aka Bug ID CSCuu51839.
The conversion utility for converting CiscoWorks Wireless LAN Solution Engine (WLSE) 4.1.91.0 and earlier to Cisco Wireless Control System (WCS) creates administrator accounts with default usernames and passwords, which allows remote attackers to gain privileges.
A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. A successful exploit could allow the attacker to cause a buffer overflow and possibly execute arbitrary commands with root-level privileges, or cause the device to reload, which could result in a denial of service condition.
A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.
A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.
The management interface in Cisco TelePresence Video Communication Server (VCS) and Cisco Expressway before X7.2.4, X8 before X8.1.2, and X8.2 before X8.2.2 and Cisco TelePresence Conductor before X2.3.1 and XC2.4 before XC2.4.1 allows remote attackers to bypass authentication via crafted login parameters, aka Bug IDs CSCur02680 and CSCur05556.
Buffer overflow in ldcconn in Hewlett-Packard (HP) Controller for Cisco Local Director on HP-UX 11.11i allows remote attackers to execute arbitrary code via a long string to TCP port 17781.
The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.
A vulnerability classified as problematic has been found in OpenDNS OpenResolve. This affects an unknown part of the file resolverapi/endpoints.py. The manipulation leads to improper output neutralization for logs. The identifier of the patch is 9eba6ba5abd89d0e36a008921eb307fcef8c5311. It is recommended to apply a patch to fix this issue. The identifier VDB-217197 was assigned to this vulnerability.
Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 before 7.2(2)8, when using Layer 2 Tunneling Protocol (L2TP) or Remote Management Access, allows remote attackers to bypass LDAP authentication and gain privileges via unknown vectors.
Cisco Network Services (CNS) NetFlow Collection Engine (NFC) before 6.0 has an nfcuser account with the default password nfcuser, which allows remote attackers to modify the product configuration and, when installed on Linux, obtain login access to the host operating system.
The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time
The SSH server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G, with firmware 8.0(4)SR1 and earlier, uses a hard-coded username and password, which allows remote attackers to access the device.
Cisco IOS 9.x, 10.x, 11.x, and 12.x and IOS XR 2.0.x, 3.0.x, and 3.2.x allows remote attackers to cause a denial of service or execute arbitrary code via a crafted IP option in the IP header in a (1) ICMP, (2) PIMv2, (3) PGM, or (4) URD packet.
Cisco Clean Access (CCA) 3.6.x through 3.6.4.2 and 4.0.x through 4.0.3.2 does not properly configure or allow modification of a shared secret authentication key, which causes all devices to have the same shared sercet and allows remote attackers to gain unauthorized access.
Cisco ONS15454 and ONS15327 running ONS before 3.4 have an account for the VxWorks Operating System in the TCC, TCC+ and XTC that cannot be changed or disabled, which allows remote attackers to gain privileges by connecting to the account via Telnet.
Cisco 2700 Series Wireless Location Appliances before 2.1.34.0 have a default administrator username "root" and password "password," which allows remote attackers to obtain administrative privileges, aka Bug ID CSCsb92893.
Integer overflow in the Real-Time Information Server (RIS) Data Collector service (RisDC.exe) in Cisco Unified Communications Manager (CUCM, formerly CallManager) before 20070711 allow remote attackers to execute arbitrary code via crafted packets, resulting in a heap-based buffer overflow.
Cisco IOS 12.2 through 12.4 before 20060920, as used by Cisco IAD2430, IAD2431, and IAD2432 Integrated Access Devices, the VG224 Analog Phone Gateway, and the MWR 1900 and 1941 Mobile Wireless Edge Routers, is incorrectly identified as supporting DOCSIS, which allows remote attackers to gain read-write access via a hard-coded cable-docsis community string and read or modify arbitrary SNMP variables.
Stack-based buffer overflow in the CSRadius service in Cisco Secure Access Control Server (ACS) for Windows before 4.1 and ACS Solution Engine before 4.1 allows remote attackers to execute arbitrary code via a crafted RADIUS Accounting-Request packet.
The Cisco Unified SIP Phone 3905 with firmware before 9.4(1) allows remote attackers to obtain root access via a session on the test interface on TCP port 7870, aka Bug ID CSCuh75574.
The web management interface on the Cisco RV110W firewall with firmware 1.2.0.9 and earlier, RV215W router with firmware 1.1.0.5 and earlier, and CVR100W router with firmware 1.0.1.19 and earlier does not prevent replaying of modified authentication requests, which allows remote attackers to obtain administrative access by leveraging the ability to intercept requests, aka Bug IDs CSCul94527, CSCum86264, and CSCum86275.
Buffer overflow in CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to cause a denial of service and possibly execute arbitrary commands via a large TACACS+ packet.
Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access
Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.
Cisco Unified Communications Domain Manager (CDM) in Unified CDM Platform Software before 4.4.2 has a hardcoded SSH private key, which makes it easier for remote attackers to obtain access to the support and root accounts by extracting this key from a binary file found in a different installation of the product, aka Bug ID CSCud41130.
Cisco Wireless LAN Controller (WLC) devices 7.4 before 7.4.110.0 distribute Aironet IOS software with a race condition in the status of the administrative HTTP server, which allows remote attackers to bypass intended access restrictions by connecting to an Aironet access point on which this server had been disabled ineffectively, aka Bug ID CSCuf66202.
The Cisco WAP4410N access point with firmware through 2.0.6.1, WRVS4400N router with firmware 1.x through 1.1.13 and 2.x through 2.0.2.1, and RVS4000 router with firmware through 2.0.3.2 allow remote attackers to read credential and configuration data, and execute arbitrary commands, via requests to the test interface on TCP port 32764, aka Bug IDs CSCum37566, CSCum43693, CSCum43700, and CSCum43685.