Untrusted search path vulnerability in dbmsrv in SAP MaxDB 7.6.03.15 on Linux allows local users to gain privileges via a modified PATH environment variable.

The Named Pipe File System in Windows 10 version 1709 and Windows Server, version 1709 allows an elevation of privilege vulnerability due to the way the Named Pipe File System handles objects, aka "Named Pipe File System Elevation of Privilege Vulnerability".

Windows Storage Services in Windows 10 versions 1511, 1607, 1703 and 1709, Windows Server 2016 and Windows Server, version 1709 allows an elevation of privilege vulnerability due to the way objects are handled in memory, aka "Windows Storage Services Elevation of Privilege Vulnerability".

A vulnerability in the folder permissions of Cisco Webex Meetings client for Windows could allow an authenticated, local attacker to modify locally stored files and execute code on a targeted device with the privilege level of the user. The vulnerability is due to folder permissions that grant a user the permission to read, write, and execute files in the Webex folders. An attacker could exploit this vulnerability to write malicious files to the Webex client directory, affecting all other users of the targeted device. A successful exploit could allow a user to execute commands with elevated privileges. Attacks on single-user systems are less likely to occur, as the attack must be carried out by the user on the user's own system. Multiuser systems have a higher risk of exploitation because folder permissions have an impact on all users of the device. For an attacker to exploit this vulnerability successfully, a second user must execute the locally installed malicious file to allow remote code execution to occur.

Windows Subsystem for Linux in Windows 10 version 1703, Windows 10 version 1709, and Windows Server, version 1709 allows an elevation of privilege vulnerability due to the way objects are handled in memory, aka "Windows Subsystem for Linux Elevation of Privilege Vulnerability".

The (1) sparc_mmap_check function in arch/sparc/kernel/sys_sparc.c and the (2) sparc64_mmap_check function in arch/sparc64/kernel/sys_sparc.c, in the Linux kernel 2.4 before 2.4.36.5 and 2.6 before 2.6.25.3, omit some virtual-address range (aka span) checks when the mmap MAP_FIXED bit is not set, which allows local users to cause a denial of service (panic) via unspecified mmap calls.

An untrusted search path in AMD Radeon settings Installer may lead to a privilege escalation or unauthorized code execution.

A signal access-control issue was discovered in the Linux kernel before 5.6.5, aka CID-7395ea4e65c2. Because exec_id in include/linux/sched.h is only 32 bits, an integer overflow can interfere with a do_notify_parent protection mechanism. A child process can send an arbitrary signal to a parent process in a different security domain. Exploitation limitations include the amount of elapsed time before an integer overflow occurs, and the lack of scenarios where signals to a parent process present a substantial operational threat.

A race condition was discovered in ext4_write_inline_data_end in fs/ext4/inline.c in the ext4 subsystem in the Linux kernel through 5.13.13.

Windows Error Reporting (WER) in Microsoft Windows 10 Gold, 1511, and 1607, and Windows Server 2016 allows an attacker to gain greater access to sensitive information and system functionality, due to the way that WER handles and executes files, aka "Windows Elevation of Privilege Vulnerability".

The Microsoft Windows Storage component on Microsoft Windows 8.1, Windows Server 2012 R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, and 1703, and Windows Server 2016 allows a security feature bypass vulnerability when it fails to validate an integrity-level check, aka "Windows Storage Security Feature Bypass Vulnerability".

With MariaDB running on Windows, when local clients connect to the server over named pipes, it's possible for an unprivileged user with an ability to run code on the server machine to intercept the named pipe connection and act as a man-in-the-middle, gaining access to all the data passed between the client and the server, and getting the ability to run SQL commands on behalf of the connected user. This occurs because of an incorrect security descriptor. This affects MariaDB Server before 10.1.48, 10.2.x before 10.2.35, 10.3.x before 10.3.26, 10.4.x before 10.4.16, and 10.5.x before 10.5.7. NOTE: this issue exists because certain details of the MariaDB CVE-2019-2503 fix did not comprehensively address attack variants against MariaDB. This situation is specific to MariaDB, and thus CVE-2020-28912 does NOT apply to other vendors that were originally affected by CVE-2019-2503.

In Akamai EAA (Enterprise Application Access) Client before 2.3.1, 2.4.x before 2.4.1, and 2.5.x before 2.5.3, an unquoted path may allow an attacker to hijack the flow of execution.

IBM MQ on HPE NonStop 8.0.4 and 8.1.0 is vulnerable to a privilege escalation attack when SharedBindingsUserId is set to effective. IBM X-ForceID: 211404.

An issue was discovered in Foxit Reader and PhantomPDF before 10.1.4. It allows DLL hijacking, aka CNVD-C-2021-68000 and CNVD-C-2021-68502.

Acronis Cyber Protect 15 for Windows prior to build 27009 and Acronis Agent for Windows prior to build 26226 allowed local privilege escalation via DLL hijacking.

Adobe Flash Player 9.x up to 9.0.48.0, 8.x up to 8.0.35.0, and 7.x up to 7.0.70.0, when running on Linux, uses insecure permissions for memory, which might allow local users to gain privileges.

The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be outside of the extraction target directory is not extracted. This is, in part, accomplished by sanitizing absolute paths of entries within the archive, skipping archive entries that contain `..` path portions, and resolving the sanitized paths against the extraction target directory. This logic was insufficient on Windows systems when extracting tar files that contained a path that was not an absolute path, but specified a drive letter different from the extraction target, such as `C:some\path`. If the drive letter does not match the extraction target, for example `D:\extraction\dir`, then the result of `path.resolve(extractionDirectory, entryPath)` would resolve against the current working directory on the `C:` drive, rather than the extraction target directory. Additionally, a `..` portion of the path could occur immediately after the drive letter, such as `C:../foo`, and was not properly sanitized by the logic that checked for `..` within the normalized and split portions of the path. This only affects users of `node-tar` on Windows systems. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves.

There is a use-after-free in kernel versions before 5.5 due to a race condition between the release of ptp_clock and cdev while resource deallocation. When a (high privileged) process allocates a ptp device file (like /dev/ptpX) and voluntarily goes to sleep. During this time if the underlying device is removed, it can cause an exploitable condition as the process wakes up to terminate and clean all attached files. The system crashes due to the cdev structure being invalid (as already freed) which is pointed to by the inode.

The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with names containing unicode values that normalized to the same value. Additionally, on Windows systems, long path portions would resolve to the same file system entities as their 8.3 "short path" counterparts. A specially crafted tar archive could thus include a directory with one form of the path, followed by a symbolic link with a different string that resolves to the same file system entity, followed by a file using the first form. By first creating a directory, and then replacing that directory with a symlink that had a different apparent name that resolved to the same entry in the filesystem, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-qq89-hq3f-393p.

hso_free_net_device in drivers/net/usb/hso.c in the Linux kernel through 5.13.4 calls unregister_netdev without checking for the NETREG_REGISTERED state, leading to a use-after-free and a double free.

OpenVPN before version 2.5.3 on Windows allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (openvpn.exe).

The CIFS filesystem in the Linux kernel before 2.6.22, when Unix extension support is enabled, does not honor the umask of a process, which allows local users to gain privileges.

Unspecified vulnerability in the Core RDBMS component for Oracle Database 9.0.1.5+, 9.2.0.7, and 10.1.0.4 on Windows systems has unknown impact and attack vectors, aka DB03. NOTE: as of 20070424, Oracle has not disputed reliable claims that DB03 occurs because RDBMS uses a NULL Discretionary Access Control List (DACL) for the Oracle process and certain shared memory sections, which allows local users to inject threads and execute arbitrary code via the OpenProcess, OpenThread, and SetThreadContext functions (DB03).

Certain setuid DB2 binaries in IBM DB2 before 9 Fix Pack 2 for Linux and Unix allow local users to overwrite arbitrary files via a symlink attack on the DB2DIAG.LOG temporary file.

Goverlan Reach Console before 9.50, Goverlan Reach Server before 3.50, and Goverlan Client Agent before 9.20.50 have an Untrusted Search Path that leads to Command Injection and Local Privilege Escalation via DLL hijacking.

Mathcad 12 through 13.1 allows local users to bypass the security features by directly accessing or editing the XML representation of the worksheet with a text editor or other program, which allows attackers to (1) bypass password protection by replacing the password field with a hash of a known password, (2) modify timestamps to avoid detection of modifications, (3) remove locks by removing the "is-locked" attribute, and (4) view locked data, which is stored in plaintext.

Microsoft Windows XP has weak permissions (FILE_WRITE_DATA and FILE_READ_DATA for Everyone) for %WINDIR%\pchealth\ERRORREP\QHEADLES, which allows local users to write and read files in this folder, as demonstrated by an ASP shell that has write access by IWAM_machine and read access by IUSR_Machine.

dandavison delta before 0.8.3 on Windows resolves an executable's pathname as a relative path from the current directory.

Acrobat Reader DC versions 2021.005.20060 (and earlier), 2020.004.30006 (and earlier) and 2017.011.30199 (and earlier) are affected by an Uncontrolled Search Path Element vulnerability. A local attacker with non-administrative privileges can plant a malicious DLL to achieve arbitrary code execution in the context of the current user via DLL hijacking. Exploitation of this issue requires user interaction.

TeamViewer before 14.7.48644 on Windows loads untrusted DLLs in certain situations.

Windows COM in Microsoft Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, and 1703, and Windows Server 2016 allows an elevation privilege vulnerability when Windows fails to properly validate input before loading type libraries, aka "Windows COM Elevation of Privilege Vulnerability". This CVE ID is unique from CVE-2017-0213.

A DCOM object in Helppane.exe in Microsoft Windows 7 SP1; Windows Server 2008 R2; Windows 8.1; Windows Server 2012 Gold and R2; Windows RT 8.1; Windows 10 Gold, 1511, and 1607; and Windows Server 2016 allows local users to gain privileges via a crafted application, aka "Windows HelpPane Elevation of Privilege Vulnerability."

A DCOM object in Helppane.exe in Microsoft Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, 1703, and Windows Server 2016, when configured to run as the interactive user, allows an authenticated attacker to run arbitrary code in another user's session, aka "Windows COM Session Elevation of Privilege Vulnerability."

IBM Tivoli Storage Manager FastBack installer could allow a remote attacker to execute arbitrary code on the system. By placing a specially-crafted DLL in the victim's path, an attacker could exploit this vulnerability when the installer is executed to run arbitrary code on the system with privileges of the victim.

Unquoted Windows search path vulnerability in Adobe Creative Cloud Desktop Application before 3.7.0.272 on Windows allows local users to gain privileges via a Trojan horse executable file in the %SYSTEMDRIVE% directory.

Multiple integer overflows in Sbus PROM driver (drivers/sbus/char/openprom.c) for the Linux kernel 2.4.x up to 2.4.27, 2.6.x up to 2.6.7, and possibly later versions, allow local users to execute arbitrary code by specifying (1) a small buffer size to the copyin_string function or (2) a negative buffer size to the copyin function.

The kernel-mode drivers in Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, and Windows 10 Gold and 1511 allow local users to gain privileges via a crafted application, aka "Win32k Elevation of Privilege Vulnerability," a different vulnerability than CVE-2016-3252, CVE-2016-3254, and CVE-2016-3286.

Race condition in arch/x86/mm/tlb.c in the Linux kernel before 4.4.1 allows local users to gain privileges by triggering access to a paging structure by a different CPU.

An issue was discovered in drivers/net/ethernet/arc/emac_main.c in the Linux kernel before 4.5. A use-after-free is caused by a race condition between the functions arc_emac_tx and arc_emac_tx_clean.

Untrusted search path vulnerability in The installer of Windows 10 Fall Creators Update Modify module for Security Measures tool allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

A vulnerability in the loading mechanism of specific dynamic link libraries in Cisco Webex Teams for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of the resources loaded by the application at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. The malicious DLL file would execute when the vulnerable application is launched. A successful exploit could allow the attacker to execute arbitrary code on the target machine with the privileges of another user account.

Adobe Animate CC versions 19.2.1 and earlier have an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to privilege escalation.

Race condition in the smb_send_rqst function in fs/cifs/transport.c in the Linux kernel before 3.7.2 allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via vectors involving a reconnection event.

Adobe Illustrator CC versions 23.1 and earlier have an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to privilege escalation.

The kernel-mode drivers in Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, and Windows 10 Gold, 1511, and 1607 allow local users to gain privileges via a crafted application, aka "Win32k Elevation of Privilege Vulnerability." a different vulnerability than CVE-2016-3266, CVE-2016-3376, and CVE-2016-7185.

VMware Workstation (15.x prior to 15.5.1) and Horizon View Agent (7.10.x prior to 7.10.1 and 7.5.x prior to 7.5.4) contain a DLL hijacking vulnerability due to insecure loading of a DLL by Cortado Thinprint. Successful exploitation of this issue may allow attackers with normal user privileges to escalate their privileges to administrator on a Windows machine where Workstation or View Agent is installed.