Active Template Library Elevation of Privilege Vulnerability

Diagnostics Hub Standard Collector Elevation of Privilege Vulnerability

Racom's MIDGE Firmware 4.4.40.105 contains an issue that allows for privilege escalation via configd.

A vulnerability in the user account management system of Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an authenticated, local attacker to elevate their privileges to root. This vulnerability is due to a procedural flaw in the password generation algorithm. An attacker could exploit this vulnerability by enabling specific Administrator-only features and connecting to the appliance through the CLI with elevated privileges. A successful exploit could allow the attacker to execute arbitrary commands as root and access the underlying operating system. To exploit this vulnerability, the attacker must have valid Administrator credentials.

gksu-polkit-0.0.3-6.fc18 was reported as fixing the issue in CVE-2012-5617 but the patch was improperly applied and it did not fixed the security issue.

An issue was discovered in the MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 software in all versions through 2.6.1. There is a local privilege escalation from the www-data account to the root account.

An issue was discovered in TitanHQ WebTitan before 5.18. It has a sudoers file that enables low-privilege users to execute a vast number of commands as root, including mv, chown, and chmod. This can be trivially exploited to gain root privileges by an attacker with access.

Windows Event Logging Service Elevation of Privilege Vulnerability

A vulnerability in the role-based access control of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker with read-only privileges to obtain administrative privileges by using the console port when the device is in the default SD-WAN configuration. This vulnerability occurs because the default configuration is applied for console authentication and authorization. An attacker could exploit this vulnerability by connecting to the console port and authenticating as a read-only user. A successful exploit could allow a user with read-only permissions to access administrative privileges.

A local privilege escalation vulnerability in ethtraceroute of Juniper Networks Junos OS may allow a locally authenticated user with shell access to escalate privileges and write to the local filesystem as root. ethtraceroute is shipped with setuid permissions enabled and is owned by the root user, allowing local users to run ethtraceroute with root privileges. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D240; 17.3 versions prior to 17.3R3-S11, 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1.

In getContentProviderImpl of ActivityManagerService.java, there is a possible permission bypass due to non-restored binder identities. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-9 Android-10 Android-11 Android-8.1Android ID: A-172935267

A sensitive information disclosure vulnerability in delta-export configuration utility (dexp) of Juniper Networks Junos OS may allow a locally authenticated shell user the ability to create and read database files generated by the dexp utility, including password hashes of local users. Since dexp is shipped with setuid permissions enabled and is owned by the root user, this vulnerability may allow a local privileged user the ability to run dexp with root privileges and access sensitive information in the dexp database. This issue affects Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D34; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.

Vulnerabilities in the Mint WorkBench allow a low privileged attacker to create and write to a file anywhere on the file system as SYSTEM with arbitrary content as long as the file does not already exist. The Mint WorkBench installer file allows a low-privileged user to run a "repair" operation on the product

oVirt Node: Lock screen accepts F2 to drop to shell causing privilege escalation

Soapbox through 0.3.1: Sandbox bypass - runs a second instance of Soapbox within a sandboxed Soapbox.

Juniper Junos OS 13.2 before 13.2R5, 13.2X51, 13.2X52, and 13.3 before 13.3R3 allow local users to bypass intended restrictions and execute arbitrary Python code via vectors involving shell access.

FusionCompute versions 6.3.0, 6.3.1, 6.5.0, 6.5.1 and 8.0.0 have a privilege escalation vulnerability. Due to improper privilege management, an attacker with common privilege may access some specific files and get the administrator privilege in the affected products. Successful exploit will cause privilege escalation.

A privilege escalation vulnerability was reported in LenovoBatteryGaugePackage for Lenovo System Interface Foundation bundled in Lenovo Vantage prior to version 10.2003.10.0 that could allow an authenticated user to execute code with elevated privileges.

A Privilege Escalation vulnerability exists in the SDBagent service in Safend Data Protector Agent 3.4.5586.9772, which could let a local malicious user obtain privileges.

A Privilege Escalation vulnerability exists in the unquoted Service Binary in SDPAgent or SDBAgent in Safend Data Protector Agent 3.4.5586.9772, which could let a local malicious user obtain privileges.

Pritunl Client through 1.2.3019.52 on Windows allows local privilege escalation, related to an ACL entry for CREATOR OWNER in platform_windows.go.

UltraVNC is a free and open source remote pc access software. A vulnerability has been found in versions prior to 1.3.8.0 in which the DSM plugin module, which allows a local authenticated user to achieve local privilege escalation (LPE) on a vulnerable system. The vulnerability has been fixed to allow loading of plugins from the installed directory. Affected users should upgrade their UltraVNC to 1.3.8.1. Users unable to upgrade should not install and run UltraVNC server as a service. It is advisable to create a scheduled task on a low privilege account to launch WinVNC.exe instead. There are no known workarounds if winvnc needs to be started as a service.

In FreeBSD 12.2-STABLE before r365767, 11.4-STABLE before r365769, 12.1-RELEASE before p10, 11.4-RELEASE before p4 and 11.3-RELEASE before p14 a number of AMD virtualization instructions operate on host physical addresses, are not subject to nested page table translation, and guest use of these instructions was not trapped.

A CWE-269 Improper Privilege Management vulnerability exists in EcoStruxureª Operator Terminal Expert runtime (Vijeo XD) that could cause privilege escalation on the workstation when interacting directly with a driver installed by the runtime software of EcoStruxureª Operator Terminal Expert.

VMware Fusion (11.x before 11.5.2), VMware Remote Console for Mac (11.x and prior before 11.0.1) and Horizon Client for Mac (5.x and prior before 5.4.0) contain a privilege escalation vulnerability due to improper use of setuid binaries. Successful exploitation of this issue may allow attackers with normal user privileges to escalate their privileges to root on the system where Fusion, VMRC or Horizon Client is installed.

smss.exe debugging subsystem in Windows NT and Windows 2000 does not properly authenticate programs that connect to other programs, which allows local users to gain administrator or SYSTEM privileges by duplicating a handle to a privileged process, as demonstrated by DebPloit.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root group on the underlying operating system. The vulnerability is due to incorrect permissions being set when the affected command is executed. An attacker could exploit this vulnerability by executing the affected command on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient security controls on the CLI. An attacker could exploit this vulnerability by using an affected CLI utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to a utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by providing crafted options to a specific command. A successful exploit could allow the attacker to gain root privileges.

A vulnerability classified as critical was found in GE Voluson S8. Affected is the underlying Windows XP operating system. Missing patches might introduce an excessive attack surface. Access to the local network is required for this attack to succeed.

A vulnerability in the CLI of the Cisco SD-WAN Solution vManage software could allow an authenticated, local attacker to elevate privileges to root-level privileges on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted file to the affected system. An exploit could allow the attacker to elevate privileges to root-level privileges.

An issue was discovered in ProlinOS through 2.4.161.8859R. An attacker with local code execution privileges as a normal user (MAINAPP) can escalate to root privileges by exploiting the setuid installation of the xtables-multi binary and leveraging the ip6tables --modprobe switch.

Exim 4 before 4.94.2 allows Execution with Unnecessary Privileges. Because Exim operates as root in the spool directory (owned by a non-root user), an attacker can write to a /var/spool/exim4/input spool header file, in which a crafted recipient address can indirectly lead to command execution.

All versions of Windscribe VPN for Mac and Windows <= v2.02.10 contain a local privilege escalation vulnerability in the WindscribeService component. A low privilege user could leverage several openvpn options to execute code as root/SYSTEM.

Sympa through 6.2.57b.2 allows a local privilege escalation from the sympa user account to full root access by modifying the sympa.conf configuration file (which is owned by sympa) and parsing it through the setuid sympa_newaliases-wrapper executable.

Pritunl Client v1.2.2550.20 contains a local privilege escalation vulnerability in the pritunl-service component. The attack vector is: malicious openvpn config. A local attacker could leverage the log and log-append along with log injection to create or append to privileged script files and execute code as root/SYSTEM.

A vulnerability in the Microsoft Active Directory integration of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to elevate privileges on an affected device. To exploit this vulnerability, an attacker would need to have a valid administrator account on an affected device. The vulnerability is due to incorrect privilege assignment. An attacker could exploit this vulnerability by logging in to the system with a crafted Active Directory account. A successful exploit could allow the attacker to obtain root privileges on an affected device.

FruityWifi through 2.4 has an unsafe Sudo configuration [(ALL : ALL) NOPASSWD: ALL]. This allows an attacker to perform a system-level (root) local privilege escalation, allowing an attacker to gain complete persistent access to the local system.

Certain NFS servers allow users to use mknod to gain privileges by creating a writable kmem device and setting the UID to 0.

Dell EMC Isilon OneFS versions 8.1 and later and Dell EMC PowerScale OneFS version 9.0.0 contain a privilege escalation vulnerability on a SmartLock Compliance mode cluster. The compadmin user connecting using ISI PRIV LOGIN SSH or ISI PRIV LOGIN CONSOLE can elevate privileges to the root user if they have ISI PRIV HARDENING privileges.

An elevation of privilege vulnerability exists in Microsoft Windows when the Windows kernel fails to properly handle parsing of certain symbolic links, aka 'Windows Kernel Elevation of Privilege Vulnerability'.

An elevation of privilege vulnerability exists in the Microsoft Windows Update Client when it does not properly handle privileges, aka 'Microsoft Windows Update Client Elevation of Privilege Vulnerability'.

Universal Robots controller execute URCaps (zip files containing Java-powered applications) without any permission restrictions and a wide API that presents many primitives that can compromise the overall robot operations as demonstrated in our video. In our PoC we demonstrate how a malicious actor could 'cook' a custom URCap that when deployed by the user (intendedly or unintendedly) compromises the system

An elevation of privilege vulnerability exists in Microsoft Windows when Windows fails to properly handle certain symbolic links, aka 'Windows Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2020-0644.

In the FPC TrustZone fingerprint App, there is a possible invalid command handler due to an exposed test feature. This could lead to local escalation of privilege in the TEE, with System execution privileges required. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-131252923

An elevation of privilege vulnerability exists in the Windows Installer when MSI packages process symbolic links, aka 'Windows Installer Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2020-0683.

A vulnerability has been identified in License Management Utility (LMU) (All versions < V2.4). The lmgrd service of the affected application is executed with local SYSTEM privileges on the server while its configuration can be modified by local users. The vulnerability could allow a local authenticated attacker to execute arbitrary commands on the server with local SYSTEM privileges.

In verifyIntentFiltersIfNeeded of PackageManagerService.java, there is a possible settings bypass allowing an app to become the default handler for arbitrary domains. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-8.0 Android-8.1 Android-9 Android-10Android ID: A-146204120

CloudCTI HIP Integrator Recognition Configuration Tool allows privilege escalation via its EXQUISE integration. This tool communicates with a service (Recognition Update Client Service) via an insecure communication channel (Named Pipe). The data (JSON) sent via this channel is used to import data from CRM software using plugins (.dll files). The plugin to import data from the EXQUISE software (DatasourceExquiseExporter.dll) can be persuaded to start arbitrary programs (including batch files) that are executed using the same privileges as Recognition Update Client Service (NT AUTHORITY\SYSTEM), thus elevating privileges. This occurs because a higher-privileged process executes scripts from a directory writable by a lower-privileged user.