Overlayfs did not properly perform permission checking when copying up files in an overlayfs and could be exploited from within a user namespace, if, for example, unprivileged user namespaces were allowed. It was possible to have a file not readable by an unprivileged user to be copied to a mountpoint controlled by the user, like a removable device. This was introduced in kernel version 4.19 by commit d1d04ef ("ovl: stack file ops"). This was fixed in kernel version 5.8 by commits 56230d9 ("ovl: verify permissions in ovl_path_open()"), 48bd024 ("ovl: switch to mounter creds in readdir") and 05acefb ("ovl: check permission to open real file"). Additionally, commits 130fdbc ("ovl: pass correct flags for opening real directory") and 292f902 ("ovl: call secutiry hook in ovl_real_ioctl()") in kernel 5.8 might also be desired or necessary. These additional commits introduced a regression in overlay mounts within user namespaces which prevented access to files with ownership outside of the user namespace. This regression was mitigated by subsequent commit b6650da ("ovl: do not fail because of O_NOATIMEi") in kernel 5.11.

An issue was discovered in slc_bump in drivers/net/can/slcan.c in the Linux kernel 3.16 through 5.6.2. It allows attackers to read uninitialized can_frame data, potentially containing sensitive information from kernel stack memory, if the configuration lacks CONFIG_INIT_STACK_ALL, aka CID-b9258a2cece4.

Directory traversal vulnerability in CIFS in Linux 2.6.16 and earlier allows local users to escape chroot restrictions for an SMB-mounted filesystem via "..\\" sequences, a similar vulnerability to CVE-2006-1864.

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35739.

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35739.

net/ipv4/af_inet.c in Linux kernel 2.4 does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the (1) getsockname, (2) getpeername, and (3) accept functions, which allows local users to obtain portions of potentially sensitive memory.

The Linux kernel before 2.6.16.9 and the FreeBSD kernel, when running on AMD64 and other 7th and 8th generation AuthenticAMD processors, only save/restore the FOP, FIP, and FDP x87 registers in FXSAVE/FXRSTOR when an exception is pending, which allows one process to determine portions of the state of floating point instructions of other processes, which can be leveraged to obtain sensitive information such as cryptographic keys. NOTE: this is the documented behavior of AMD64 processors, but it is inconsistent with Intel processors in a security-relevant fashion that was not addressed by the kernels.

net/ipv4/netfilter/ip_conntrack_core.c in Linux kernel 2.4 and 2.6, and possibly net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c in 2.6, does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the getsockopt function with SO_ORIGINAL_DST, which allows local users to obtain portions of potentially sensitive memory.

The procfs code (proc_misc.c) in Linux 2.6.14.3 and other versions before 2.6.15 allows attackers to read sensitive kernel memory via unspecified vectors in which a signed value is added to an unsigned value.

dm-crypt in Linux kernel 2.6.15 and earlier does not clear a structure before it is freed, which leads to a memory disclosure that could allow local users to obtain sensitive information about a cryptographic key.

Sensitive information disclosure due to cleartext storage of sensitive information. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 35979.

The wanxl_ioctl function in drivers/net/wan/wanxl.c in the Linux kernel before 3.11.7 does not properly initialize a certain data structure, which allows local users to obtain sensitive information from kernel memory via an ioctl call.

drm.c in Linux kernel 2.6.10 to 2.6.13 creates a debug file in sysfs with world-readable and world-writable permissions, which allows local users to enable DRM debugging and obtain sensitive information.

A stack information leak flaw was found in s390/s390x in the Linux kernel’s memory manager functionality, where it incorrectly writes to the /proc/sys/vm/cmm_timeout file. This flaw allows a local user to see the kernel data.

A memory disclosure flaw was found in the Linux kernel's versions before 4.18.0-193.el8 in the sysctl subsystem when reading the /proc/sys/kernel/rh_features file. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality.

A logic bug flaw was found in Linux kernel before 5.8-rc1 in the implementation of SSBD. A bug in the logic handling allows an attacker with a local account to disable SSBD protection during a context switch when additional speculative execution mitigations are in place. This issue was introduced when the per task/process conditional STIPB switching was added on top of the existing SSBD switching. The highest threat from this vulnerability is to confidentiality.

A flaw was found in the Linux Kernel before 5.8-rc1 in the prctl() function, where it can be used to enable indirect branch speculation after it has been disabled. This call incorrectly reports it as being 'force disabled' when it is not and opens the system to Spectre v2 attacks. The highest threat from this vulnerability is to confidentiality.

Signedness error in the copy_from_read_buf function in n_tty.c for Linux kernel 2.6.10 and 2.6.11rc1 allows local users to read kernel memory via a negative argument.

The ext2_make_empty function call in the Linux kernel before 2.6.11.6 does not properly initialize memory when creating a block for a new directory entry, which allows local users to obtain potentially sensitive information by reading the block.

dm-crypt on Linux kernel 2.6.x, when used on certain file systems with a block size 1024 or greater, has certain "IV computation" weaknesses that allow watermarked files to be detected without decryption.

An information leak flaw was found due to uninitialized memory in the Linux kernel's TIPC protocol subsystem, in the way a user sends a TIPC datagram to one or more destinations. This flaw allows a local user to read some kernel memory. This issue is limited to no more than 7 bytes, and the user cannot control what is read. This flaw affects the Linux kernel versions prior to 5.17-rc1.

The mincore() implementation in mm/mincore.c in the Linux kernel through 4.19.13 allowed local attackers to observe page cache access patterns of other processes on the same system, potentially allowing sniffing of secret information. (Fixing this affects the output of the fincore program.) Limited remote exploitation may be possible, as demonstrated by latency differences in accessing public files from an Apache HTTP Server.

The open_exec function in the execve functionality (exec.c) in Linux kernel 2.4.x up to 2.4.27, and 2.6.x up to 2.6.8, allows local users to read non-readable ELF binaries by using the interpreter (PT_INTERP) functionality.

Floating point information leak in the context switch code for Linux 2.4.x only checks the MFH bit but does not verify the FPH owner, which allows local users to read register values of other processes by setting the MFH bit.

The e1000 driver for Linux kernel 2.4.26 and earlier does not properly initialize memory before using it, which allows local users to read portions of kernel memory. NOTE: this issue was originally incorrectly reported as a "buffer overflow" by some sources.

ifconfig, when used on the Linux kernel 2.2 and later, does not report when the network interface is in promiscuous mode if it was put in promiscuous mode using PACKET_MR_PROMISC, which could allow attackers to sniff the network without detection, as demonstrated using libpcap.

The XFS file system code in Linux 2.4.x has an information leak in which in-memory data is written to the device for the XFS file system, which allows local users to obtain sensitive information by reading the raw device.

A "potential" buffer overflow exists in the panic() function in Linux 2.4.x, although it may not be exploitable due to the functionality of panic.

The JFS file system code in Linux 2.4.x has an information leak in which in-memory data is written to the device for the JFS file system, which allows local users to obtain sensitive information by reading the raw device.

The execve system call in Linux 2.4.x records the file descriptor of the executable process in the file table of the calling process, which allows local users to gain read access to restricted file descriptors.

The linux 2.4 kernel before 2.4.19 assumes that the fninit instruction clears all registers, which could lead to an information leak on processors that do not clear all relevant SSE registers.

cryptoloop on Linux kernel 2.6.x, when used on certain file systems with a block size 1024 or greater, has certain "IV computation" weaknesses that allow watermarked files to be detected without decryption.

The crypto_report_one function in crypto/crypto_user.c in the report API in the crypto user configuration API in the Linux kernel through 3.8.2 does not initialize certain structure members, which allows local users to obtain sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability.

Linux kernel 2.6.10 and 2.6.11rc1-bk6 uses different size types for offset arguments to the proc_file_read and locks_read_proc functions, which leads to a heap-based buffer overflow when a signed comparison causes negative integers to be used in a positive context.

Linux kernel does not properly convert 64-bit file offset pointers to 32 bits, which allows local users to access portions of kernel memory.

The sys_get_thread_area function in process.c in Linux 2.6 before 2.6.12.4 and 2.6.13 does not clear a data structure before copying it to userspace, which might allow a user process to obtain sensitive information.

In the Linux kernel before 5.2.9, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_fd.c driver, aka CID-30a8beeb3042.

The /proc filesystem in Linux allows local users to obtain sensitive information by opening various entries in /proc/self before executing a setuid program, which causes the program to fail to change the ownership and permissions of those entries.

The setsockopt function in the L2CAP and HCI Bluetooth support in the Linux kernel before 2.4.34.3 allows context-dependent attackers to read kernel memory and obtain sensitive information via unspecified vectors involving the copy_from_user function accessing an uninitialized stack buffer.

The fill_event_metadata function in fs/notify/fanotify/fanotify_user.c in the Linux kernel through 3.9.4 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory via a read operation on the fanotify descriptor.

The timer_create syscall implementation in kernel/time/posix-timers.c in the Linux kernel before 4.14.8 doesn't properly validate the sigevent->sigev_notify field, which leads to out-of-bounds access in the show_timer function (called when /proc/$PID/timers is read). This allows userspace applications to read arbitrary kernel memory (on a kernel built with CONFIG_POSIX_TIMERS and CONFIG_CHECKPOINT_RESTORE).

The (1) key_notify_sa_flush and (2) key_notify_policy_flush functions in net/key/af_key.c in the Linux kernel before 3.10 do not initialize certain structure members, which allows local users to obtain sensitive information from kernel heap memory by reading a broadcast message from the notify interface of an IPSec key_socket.

The HP Smart Array controller disk-array driver and Compaq SMART2 controller disk-array driver in the Linux kernel through 3.9.4 do not initialize certain data structures, which allows local users to obtain sensitive information from kernel memory via (1) a crafted IDAGETPCIINFO command for a /dev/ida device, related to the ida_locked_ioctl function in drivers/block/cpqarray.c or (2) a crafted CCISS_PASSTHRU32 command for a /dev/cciss device, related to the cciss_ioctl32_passthru function in drivers/block/cciss.c.

The crypto_report_one function in crypto/crypto_user.c in the report API in the crypto user configuration API in the Linux kernel through 3.8.2 uses an incorrect length value during a copy operation, which allows local users to obtain sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability.

In the Linux kernel through 5.4.6, there are information leaks of uninitialized memory to a USB device in the drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c driver, aka CID-da2311a6385c.

The report API in the crypto user configuration API in the Linux kernel through 3.8.2 uses an incorrect C library function for copying strings, which allows local users to obtain sensitive information from kernel stack memory by leveraging the CAP_NET_ADMIN capability.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 131853.

The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 ("Double-Hash Port Selection Algorithm") of RFC 6056.

An issue was discovered in the Linux kernel before 5.16.12. drivers/net/usb/sr9700.c allows attackers to obtain sensitive information from heap memory via crafted frame lengths from a device.

An issue was discovered in drivers/usb/gadget/function/rndis.c in the Linux kernel before 5.16.10. The RNDIS USB gadget lacks validation of the size of the RNDIS_MSG_SET command. Attackers can obtain sensitive information from kernel memory.