A crafted response from an upstream server the recursor has been configured to forward-recurse to can cause a Denial of Service in the Recursor. The default configuration of the Recursor does not use recursive forwarding and is not affected.

When incoming DNS over HTTPS support is enabled using the nghttp2 provider, and queries are routed to a tcp-only or DNS over TLS backend, an attacker can trigger an assertion failure in DNSdist by sending a request for a zone transfer (AXFR or IXFR) over DNS over HTTPS, causing the process to stop and thus leading to a Denial of Service. DNS over HTTPS is not enabled by default, and backends are using plain DNS (Do53) by default.

An issue has been found in PowerDNS Authoritative Server before 3.4.11 and 4.0.2 allowing a remote, unauthenticated attacker to cause a denial of service by opening a large number of TCP connections to the web server. If the web server runs out of file descriptors, it triggers an exception and terminates the whole PowerDNS process. While it's more complicated for an unauthorized attacker to make the web server run out of file descriptors since its connection will be closed just after being accepted, it might still be possible.

An issue has been found in dnsdist before 1.2.0 in the way EDNS0 OPT records are handled when parsing responses from a backend. When dnsdist is configured to add EDNS Client Subnet to a query, the response may contain an EDNS0 OPT record that has to be removed before forwarding the response to the initial client. On a 32-bit system, the pointer arithmetic used when parsing the received response to remove that record might trigger an undefined behavior leading to a crash.

An issue has been found in PowerDNS before 3.4.11 and 4.0.2, and PowerDNS recursor before 4.0.4, allowing an attacker in position of man-in-the-middle to alter the content of an AXFR because of insufficient validation of TSIG signatures. A missing check that the TSIG record is the last one, leading to the possibility of parsing records that are not covered by the TSIG signature.

An attacker can publish a zone containing specific Resource Record Sets. Repeatedly processing and caching results for these sets can lead to a denial of service.

PowerDNS Authoritative Server before 2.9.21.1 drops malformed queries, which might make it easier for remote attackers to poison DNS caches of other products running on other servers, a different issue than CVE-2008-1447 and CVE-2008-3217.

PowerDNS (aka pdns) Authoritative Server 3.4.4 before 3.4.7 allows remote attackers to cause a denial of service (assertion failure and server crash) via crafted query packets.

The DNS packet parsing/generation code in PowerDNS (aka pdns) Authoritative Server 3.4.x before 3.4.6 allows remote attackers to cause a denial of service (crash) via crafted query packets.

An issue has been found in PowerDNS before 3.4.11 and 4.0.2, and PowerDNS recursor before 4.0.4, allowing an attacker in position of man-in-the-middle to alter the content of an AXFR because of insufficient validation of TSIG signatures. A missing check of the TSIG time and fudge values was found in AXFRRetriever, leading to a possible replay attack.

A vulnerability was found in PowerDNS Authoritative Server before 4.0.7 and before 4.1.7. An insufficient validation of data coming from the user when building a HTTP request from a DNS query in the HTTP Connector of the Remote backend, allowing a remote user to cause a denial of service by making the server connect to an invalid endpoint, or possibly information disclosure by making the server connect to an internal endpoint and somehow extracting meaningful information about the response

An issue has been found in PowerDNS before 3.4.11 and 4.0.2, and PowerDNS recursor before 3.7.4 and 4.0.4, allowing a remote, unauthenticated attacker to cause an abnormal CPU usage load on the PowerDNS server by sending crafted DNS queries, which might result in a partial denial of service if the system becomes overloaded. This issue is based on the fact that the PowerDNS server parses all records present in a query regardless of whether they are needed or even legitimate. A specially crafted query containing a large number of records can be used to take advantage of that behaviour.

An issue has been found in PowerDNS Recursor from 4.0.0 up to and including 4.1.4. A remote attacker sending a DNS query for a meta-type like OPT can lead to a zone being wrongly cached as failing DNSSEC validation. It only arises if the parent zone is signed, and all the authoritative servers for that parent zone answer with FORMERR to a query for at least one of the meta-types. As a result, subsequent queries from clients requesting DNSSEC validation will be answered with a ServFail.

An issue has been found in PowerDNS DNSDist before 1.3.3 allowing a remote attacker to craft a DNS query with trailing data such that the addition of a record by dnsdist, for example an OPT record when adding EDNS Client Subnet, might result in the trailing data being smuggled to the backend as a valid record while not seen by dnsdist. This is an issue when dnsdist is deployed as a DNS Firewall and used to filter some records that should not be received by the backend. This issue occurs only when either the 'useClientSubnet' or the experimental 'addXPF' parameters are used when declaring a new backend.

Improper input validation bugs in DNSSEC validators components in PowerDNS version 4.1.0 allow attacker in man-in-the-middle position to deny existence of some data in DNS via packet replay.

The transwiki import functionality in MediaWiki before 1.16.3 does not properly check privileges, which allows remote authenticated users to perform imports from any wgImportSources wiki via a crafted POST request.

Drupal 6.x before 6.16 and 5.x before version 5.22 does not properly block users under certain circumstances. A user with an open session that was blocked could maintain their session on the Drupal site despite being blocked.

When SSL/TLS Forward Proxy Decryption mode has been configured to decrypt the web transactions, the PAN-OS URL filtering feature inspects the HTTP Host and URL path headers for policy enforcement on the decrypted HTTPS web transactions but does not consider Server Name Indication (SNI) field within the TLS Client Hello handshake. This allows a compromised host in a protected network to evade any security policy that uses URL filtering on a firewall configured with SSL Decryption in the Forward Proxy mode. A malicious actor can then use this technique to evade detection of communication on the TLS handshake phase between a compromised host and a remote malicious server. This technique does not increase the risk of a host being compromised in the network. It does not impact the confidentiality or availability of a firewall. This is considered to have a low impact on the integrity of the firewall because the firewall fails to enforce a policy on certain traffic that should have been blocked. This issue does not impact the URL filtering policy enforcement on clear text or encrypted web transactions. This technique can be used only after a malicious actor has compromised a host in the protected network and the TLS/SSL Decryption feature is enabled for the traffic that the attacker controls. Palo Alto Networks is not aware of any malware that uses this technique to exfiltrate data. This issue is applicable to all current versions of PAN-OS. This issue does not impact Panorama or WF-500 appliances.

IBM Doors Web Access 9.5 and 9.6 could allow a remote attacker to hijack the clicking action of the victim. By persuading a victim to visit a malicious Web site, a remote attacker could exploit this vulnerability to hijack the victim's click actions and possibly launch further attacks against the victim. IBM X-Force ID: 129826.

IBM InfoSphere Master Data Management Server 10.1. 11.0. 11.3, 11.4, 11.5, and 11.6 could allow a remote attacker to hijack the clicking action of the victim. By persuading a victim to visit a malicious Web site, a remote attacker could exploit this vulnerability to hijack the victim's click actions and possibly launch further attacks against the victim. IBM X-Force ID: 119733.

A remote HTTP parameter Pollution vulnerability in HPE Matrix Operating Environment version 7.6 was found.

IBM Spectrum Control (formerly Tivoli Storage Productivity Center) 5.2.x before 5.2.11 allows remote authenticated users to conduct clickjacking attacks via a crafted web site.

IBM Algorithmics One-Algo Risk Application (ARA) 4.9.1 through 5.1.0 allows remote authenticated users to conduct clickjacking attacks via unspecified vectors. IBM X-Force ID: 109399.

IBM InfoSphere Master Data Management Collaborative Edition 9.1, 10.1, 11.0, 11.3, and 11.4 before FP03 allows remote authenticated users to conduct clickjacking attacks via unspecified vectors.

Jazz Team Server in Jazz Foundation in IBM Rational Collaborative Lifecycle Management (CLM) 3.x and 4.x before 4.0.7 IF9, 5.x before 5.0.2 IF11, and 6.x before 6.0.0 IF4; Rational Quality Manager (RQM) 3.x before 3.0.1.6 IF7, 4.x before 4.0.7 IF9, 5.x before 5.0.2 IF11, and 6.0 before 6.0.0 IF4; Rational Team Concert (RTC) 3.x before 3.0.1.6 IF7, 4.x before 4.0.7 IF9, 5.x before 5.0.2 IF11, and 6.0 before 6.0.0 IF4; Rational Requirements Composer (RRC) 3.x before 3.0.1.6 IF7 and 4.x before 4.0.7 IF9; Rational DOORS Next Generation (RDNG) 4.x before 4.0.7 IF9, 5.x before 5.0.2 IF11, and 6.0 before 6.0.0 IF4; Rational Engineering Lifecycle Manager (RELM) 4.0.3 through 4.0.7, 5.0 through 5.0.2, and 6.0.0; Rational Rhapsody Design Manager (DM) 4.0 through 4.0.7, 5.0 through 5.0.2, and 6.0.0; and Rational Software Architect Design Manager (DM) 4.0 through 4.0.7, 5.0 through 5.0.2, and 6.0.0 allows remote authenticated users to conduct clickjacking attacks via a crafted web site.

Sydent is a reference matrix identity server. A malicious user could abuse Sydent to send out arbitrary emails from the Sydent email address. This could be used to construct plausible phishing emails, for example. This issue has been fixed in 4469d1d.

CRLF injection vulnerability in IBM Tivoli Integrated Portal (TIP) 2.2.x allows remote authenticated users to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via unspecified vectors.

A spoofing vulnerability exists in Microsoft Power BI Report Server in the way it validates the content-type of uploaded attachments, aka 'Microsoft Power BI Report Server Spoofing Vulnerability'.

A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker needs valid administrator credentials.

The GDS component in IBM InfoSphere Master Data Management - Collaborative Edition 10.0 through 11.0 and InfoSphere Master Data Management Server for Product Information Management 9.0 and 9.1 does not properly handle FRAME elements, which makes it easier for remote authenticated users to conduct phishing attacks via a crafted web site.

Improper input validation vulnerability in E-mail of Cybozu Garoon 4.0.0 to 5.0.2 allows a remote attacker with an administrative privilege to alter the data of E-mail without the appropriate privilege.

Outlook Web App (OWA) in Microsoft Exchange Server 2013 SP1 and Cumulative Update 6 does not properly validate redirection tokens, which allows remote attackers to redirect users to arbitrary web sites and spoof the origin of e-mail messages via unspecified vectors, aka "Exchange URL Redirection Vulnerability."

The GDS component in IBM InfoSphere Master Data Management - Collaborative Edition 10.x and 11.x before 11.0 FP4 and InfoSphere Master Data Management Server for Product Information Management 9.0 and 9.1 allows remote authenticated users to inject links via unspecified vectors.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

The Subscriptions feature in Open-Xchange Server before 6.20.7 rev14, 6.22.0 before rev13, and 6.22.1 before rev14 does not properly validate the publication-source URL, which allows remote authenticated users to trigger arbitrary outbound TCP traffic via a crafted Source field, as demonstrated by (1) an ftp: URL, (2) a gopher: URL, or (3) an http://127.0.0.1/ URL, related to a "Server-side request forging (SSRF)" issue.

IBM API Connect 5.0.0.0 through 5.0.8.3 could allow a remote attacker to hijack the clicking action of the victim. By persuading a victim to visit a malicious Web site, a remote attacker could exploit this vulnerability to hijack the victim's click actions and possibly launch further attacks against the victim. IBM X-Force ID: 143744.

Improper input validation vulnerability in SmartTagPlugin prior to version 1.2.15-6 allows privileged attackers to trigger a XSS on a victim's devices.

Absolute path traversal vulnerability in Alt-N Technologies WebAdmin 2.0.0 through 2.0.2 allows remote attackers with administrator privileges to (1) determine the installation path by reading the contents of the Name parameter in a link, and (2) read arbitrary files via an absolute path in the Name parameter.

Cross Site Scripting (XSS) vulnerability exists in VMware vRealize Log Insight prior to 8.1.0 due to improper Input validation.

vulnerability within the Multimedia Viewer feature of Cisco Webex Meetings could allow an authenticated, remote attacker to bypass security protections. The vulnerability is due to missing security warning dialog boxes when a room host views shared multimedia files. An authenticated, remote attacker could exploit this vulnerability by using the host role to share files within the Multimedia sharing feature and convincing a former room host to view that file. A warning dialog normally appears cautioning users before the file is displayed; however, the former host would not see that warning dialog, and any shared multimedia would be rendered within the user's browser. The attacker could leverage this behavior to conduct additional attacks by including malicious files within a targeted room host's browser window.

A vulnerability in web UI input field of GateManager allows authenticated attacker to enter script tags that could cause XSS. This issue affects: GateManager all versions prior to 9.3.

IBM Sterling B2B Integrator 5.2 before 5020500_8 allows remote authenticated users to conduct clickjacking attacks via unspecified vectors.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 Admin console is vulnerable to a Client-side HTTP parameter pollution vulnerability. IBM X-Force ID: 160243.

Lack of adequate input/output validation for ABB eSOMS versions 4.0 to 6.0.2 might allow an attacker to attack such as stored cross-site scripting by storing malicious content in the database.

A vulnerability in the web-based management interface of Cisco Prime Service Catalog could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based interface. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by adding specific strings to multiple configuration fields. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information.

Windows DNS Server in Microsoft Windows 2000 SP4, Server 2003 SP1 and SP2, and Server 2008, when dynamic updates are enabled, does not restrict registration of the "wpad" hostname, which allows remote authenticated users to hijack the Web Proxy Auto-Discovery (WPAD) feature, and conduct man-in-the-middle attacks by spoofing a proxy server, via a Dynamic Update request for this hostname, aka "DNS Server Vulnerability in WPAD Registration Vulnerability," a related issue to CVE-2007-1692.

IBM Jazz Foundation (IBM Rational Collaborative Lifecycle Management 5.0 through 6.0.6) is vulnerable to HTTP header injection, caused by improper validation of input. By persuading a victim to visit a specially-crafted Web page, a remote attacker could exploit this vulnerability to inject arbitrary HTTP headers, which will allow the attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. IBM X-Force ID: 144884.

Mermaid is a Javascript based diagramming and charting tool that uses Markdown-inspired text definitions and a renderer to create and modify complex diagrams. Prior to version 8.13.8, malicious diagrams can run javascript code at diagram readers' machines. Users should upgrade to version 8.13.8 to receive a patch. There are no known workarounds aside from upgrading.