In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org

loop_rw_iter in fs/io_uring.c in the Linux kernel 5.10 through 5.14.6 allows local users to gain privileges by using IORING_OP_PROVIDE_BUFFERS to trigger a free of a kernel buffer, as demonstrated by using /proc/<pid>/maps for exploitation.

In the Linux kernel, the following vulnerability has been resolved: habanalabs: fix UAF in export_dmabuf() As soon as we'd inserted a file reference into descriptor table, another thread could close it. That's fine for the case when all we are doing is returning that descriptor to userland (it's a race, but it's a userland race and there's nothing the kernel can do about it). However, if we follow fd_install() with any kind of access to objects that would be destroyed on close (be it the struct file itself or anything destroyed by its ->release()), we have a UAF. dma_buf_fd() is a combination of reserving a descriptor and fd_install(). habanalabs export_dmabuf() calls it and then proceeds to access the objects destroyed on close. In particular, it grabs an extra reference to another struct file that will be dropped as part of ->release() for ours; that "will be" is actually "might have already been". Fix that by reserving descriptor before anything else and do fd_install() only when everything had been set up. As a side benefit, we no longer have the failure exit with file already created, but reference to underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet; unlike dma_buf_fd(), fd_install() can't fail.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix potential use-after-free in airoha_npu_get() np->name was being used after calling of_node_put(np), which releases the node and can lead to a use-after-free bug. Previously, of_node_put(np) was called unconditionally after of_find_device_by_node(np), which could result in a use-after-free if pdev is NULL. This patch moves of_node_put(np) after the error check to ensure the node is only released after both the error and success cases are handled appropriately, preventing potential resource issues.

A use-after-free flaw was found in cgroup1_parse_param in kernel/cgroup/cgroup-v1.c in the Linux kernel's cgroup v1 parser. A local attacker with a user privilege could cause a privilege escalation by exploiting the fsconfig syscall parameter leading to a container breakout and a denial of service on the system.

In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: nbpfaxi: Fix memory corruption in probe() The nbpf->chan[] array is allocated earlier in the nbpf_probe() function and it has "num_channels" elements. These three loops iterate one element farther than they should and corrupt memory. The changes to the second loop are more involved. In this case, we're copying data from the irqbuf[] array into the nbpf->chan[] array. If the data in irqbuf[i] is the error IRQ then we skip it, so the iterators are not in sync. I added a check to ensure that we don't go beyond the end of the irqbuf[] array. I'm pretty sure this can't happen, but it seemed harmless to add a check. On the other hand, after the loop has ended there is a check to ensure that the "chan" iterator is where we expect it to be. In the original code we went one element beyond the end of the array so the iterator wasn't in the correct place and it would always return -EINVAL. However, now it will always be in the correct place. I deleted the check since we know the result.

In the Linux kernel, the following vulnerability has been resolved: net: atm: add lec_mutex syzbot found its way in net/atm/lec.c, and found an error path in lecd_attach() could leave a dangling pointer in dev_lec[]. Add a mutex to protect dev_lecp[] uses from lecd_attach(), lec_vcc_attach() and lec_mcast_attach(). Following patch will use this mutex for /proc/net/atm/lec. BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline] BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142 CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xcd/0x680 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 lecd_attach net/atm/lec.c:751 [inline] lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4328 [inline] __kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015 alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711 lecd_attach net/atm/lec.c:737 [inline] lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x2b4/0x4d0 mm/slub.c:4842 free_netdev+0x6c5/0x910 net/core/dev.c:11892 lecd_attach net/atm/lec.c:744 [inline] lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893

In the Linux kernel, the following vulnerability has been resolved: jfs: upper bound check of tree index in dbAllocAG When computing the tree index in dbAllocAG, we never check if we are out of bounds realative to the size of the stree. This could happen in a scenario where the filesystem metadata are corrupted.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix UAF in panthor_gem_create_with_handle() debugfs code The object is potentially already gone after the drm_gem_object_put(). In general the object should be fully constructed before calling drm_gem_handle_create(), except the debugfs tracking uses a separate lock and list and separate flag to denotate whether the object is actually initialized. Since I'm touching this all anyway simplify this by only adding the object to the debugfs when it's ready for that, which allows us to delete that separate flag. panthor_gem_debugfs_bo_rm() already checks whether we've actually been added to the list or this is some error path cleanup. v2: Fix build issues for !CONFIG_DEBUGFS (Adrián) v3: Add linebreak and remove outdated comment (Liviu)

In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent potential UAF If we hit the error path, the previous fence (if there is one) has already been put() prior to this, so doing a fence_wait could lead to UAF. Tweak the flow to do to the put() until after we do the wait. (cherry picked from commit 9b7ca35ed28fe5fad86e9d9c24ebd1271e4c9c3e)

In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid __bpf_prog_ret0_warn when jit fails syzkaller reported an issue: WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Modules linked in: CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39 RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105 ... When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable. This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog, but jit failed due to FAULT_INJECTION. As a result, incorrectly treats the program as valid, when the program runs it calls `__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).

prealloc_elems_and_freelist in kernel/bpf/stackmap.c in the Linux kernel before 5.14.12 allows unprivileged users to trigger an eBPF multiplication integer overflow with a resultant out-of-bounds write.

In the Linux kernel, the following vulnerability has been resolved: comedi: Make insn_rw_emulate_bits() do insn->n samples The `insn_rw_emulate_bits()` function is used as a default handler for `INSN_READ` instructions for subdevices that have a handler for `INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default handler for `INSN_WRITE` instructions for subdevices that have a handler for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the `INSN_READ` or `INSN_WRITE` instruction handling with a constructed `INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE` instructions are supposed to be able read or write multiple samples, indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently only handles a single sample. For `INSN_READ`, the comedi core will copy `insn->n` samples back to user-space. (That triggered KASAN kernel-infoleak errors when `insn->n` was greater than 1, but that is being fixed more generally elsewhere in the comedi core.) Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return an error, to conform to the general expectation for `INSN_READ` and `INSN_WRITE` handlers.

In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix the using of Rx buffer DMA The wx_rx_buffer structure contained two DMA address fields: 'dma' and 'page_dma'. However, only 'page_dma' was actually initialized and used to program the Rx descriptor. But 'dma' was uninitialized and used in some paths. This could lead to undefined behavior, including DMA errors or use-after-free, if the uninitialized 'dma' was used. Althrough such error has not yet occurred, it is worth fixing in the code.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Avoid overflow with array index The variable index is modified and reused as array index when modify register EIOINTC_ENABLE. There will be array index overflow problem.

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix memory corruption of input_handler_list In appletb_kbd_probe an input handler is initialised and then registered with input core through input_register_handler(). When this happens input core will add the input handler (specifically its node) to the global input_handler_list. The input_handler_list is central to the functionality of input core and is traversed in various places in input core. An example of this is when a new input device is plugged in and gets registered with input core. The input_handler in probe is allocated as device managed memory. If a probe failure occurs after input_register_handler() the input_handler memory is freed, yet it will remain in the input_handler_list. This effectively means the input_handler_list contains a dangling pointer to data belonging to a freed input handler. This causes an issue when any other input device is plugged in - in my case I had an old PixArt HP USB optical mouse and I decided to plug it in after a failure occurred after input_register_handler(). This lead to the registration of this input device via input_register_device which involves traversing over every handler in the corrupted input_handler_list and calling input_attach_handler(), giving each handler a chance to bind to newly registered device. The core of this bug is a UAF which causes memory corruption of input_handler_list and to fix it we must ensure the input handler is unregistered from input core, this is done through input_unregister_handler(). [ 63.191597] ================================================================== [ 63.192094] BUG: KASAN: slab-use-after-free in input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] Read of size 8 at addr ffff888105ea7c80 by task kworker/0:2/54 [ 63.192094] [ 63.192094] CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.16.0-rc2-00321-g2aa6621d [ 63.192094] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.164 [ 63.192094] Workqueue: usb_hub_wq hub_event [ 63.192094] Call Trace: [ 63.192094] <TASK> [ 63.192094] dump_stack_lvl+0x53/0x70 [ 63.192094] print_report+0xce/0x670 [ 63.192094] kasan_report+0xce/0x100 [ 63.192094] input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] input_register_device+0x76c/0xd00 [ 63.192094] hidinput_connect+0x686d/0xad60 [ 63.192094] hid_connect+0xf20/0x1b10 [ 63.192094] hid_hw_start+0x83/0x100 [ 63.192094] hid_device_probe+0x2d1/0x680 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] hid_add_device+0x30b/0x910 [ 63.192094] usbhid_probe+0x920/0xe00 [ 63.192094] usb_probe_interface+0x363/0x9a0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_set_configuration+0xd14/0x1880 [ 63.192094] usb_generic_driver_probe+0x78/0xb0 [ 63.192094] usb_probe_device+0xaa/0x2e0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_new_device+0x7b4/0x1000 [ 63.192094] hub_event+0x234d/0x3 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing TCA_MQPRIO_TC_ENTRY_INDEX is validated using NLA_POLICY_MAX(NLA_U32, TC_QOPT_MAX_QUEUE), which allows the value TC_QOPT_MAX_QUEUE (16). This leads to a 4-byte out-of-bounds stack write in the fp[] array, which only has room for 16 elements (0–15). Fix this by changing the policy to allow only up to TC_QOPT_MAX_QUEUE - 1.

In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access In the preparation stage of CPU online, if the corresponding the rdp's->nocb_cb_kthread does not exist, will be created, there is a situation where the rdp's rcuop kthreads creation fails, and then de-offload this CPU's rdp, does not assign this CPU's rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and rdp's->rdp_gp->nocb_gp_kthread is still valid. This will cause the subsequent re-offload operation of this offline CPU, which will pass the conditional check and the kthread_unpark() will access invalid rdp's->nocb_cb_kthread pointer. This commit therefore use rdp's->nocb_gp_kthread instead of rdp_gp's->nocb_gp_kthread for safety check.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb and 64 Kb respectively. Adjust max size definitions and return correct EEPROM length based on device. Also prevent out-of-bound read/write.

In the Linux kernel, the following vulnerability has been resolved: fs/buffer: fix use-after-free when call bh_read() helper There's issue as follows: BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110 Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0 CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_address_description.constprop.0+0x2c/0x390 print_report+0xb4/0x270 kasan_report+0xb8/0xf0 end_buffer_read_sync+0xe3/0x110 end_bio_bh_io_sync+0x56/0x80 blk_update_request+0x30a/0x720 scsi_end_request+0x51/0x2b0 scsi_io_completion+0xe3/0x480 ? scsi_device_unbusy+0x11e/0x160 blk_complete_reqs+0x7b/0x90 handle_softirqs+0xef/0x370 irq_exit_rcu+0xa5/0xd0 sysvec_apic_timer_interrupt+0x6e/0x90 </IRQ> Above issue happens when do ntfs3 filesystem mount, issue may happens as follows: mount IRQ ntfs_fill_super read_cache_page do_read_cache_folio filemap_read_folio mpage_read_folio do_mpage_readpage ntfs_get_block_vbo bh_read submit_bh wait_on_buffer(bh); blk_complete_reqs scsi_io_completion scsi_end_request blk_update_request end_bio_bh_io_sync end_buffer_read_sync __end_buffer_read_notouch unlock_buffer wait_on_buffer(bh);--> return will return to caller put_bh --> trigger stack-out-of-bounds In the mpage_read_folio() function, the stack variable 'map_bh' is passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and wait_on_buffer() returns to continue processing, the stack variable is likely to be reclaimed. Consequently, during the end_buffer_read_sync() process, calling put_bh() may result in stack overrun. If the bh is not allocated on the stack, it belongs to a folio. Freeing a buffer head which belongs to a folio is done by drop_buffers() which will fail to free buffers which are still locked. So it is safe to call put_bh() before __end_buffer_read_notouch().

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF on smcsk after smc_listen_out() BPF CI testing report a UAF issue: [ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0 [ 16.447134] #PF: supervisor read access in kernel mod e [ 16.447516] #PF: error_code(0x0000) - not-present pag e [ 16.447878] PGD 0 P4D 0 [ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I [ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2 [ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E [ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4 [ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k [ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0 [ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6 [ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0 [ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0 [ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5 [ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0 [ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0 [ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0 [ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3 [ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0 [ 16.456459] PKRU: 5555555 4 [ 16.456654] Call Trace : [ 16.456832] <TASK > [ 16.456989] ? __die+0x23/0x7 0 [ 16.457215] ? page_fault_oops+0x180/0x4c 0 [ 16.457508] ? __lock_acquire+0x3e6/0x249 0 [ 16.457801] ? exc_page_fault+0x68/0x20 0 [ 16.458080] ? asm_exc_page_fault+0x26/0x3 0 [ 16.458389] ? smc_listen_work+0xc02/0x159 0 [ 16.458689] ? smc_listen_work+0xc02/0x159 0 [ 16.458987] ? lock_is_held_type+0x8f/0x10 0 [ 16.459284] process_one_work+0x1ea/0x6d 0 [ 16.459570] worker_thread+0x1c3/0x38 0 [ 16.459839] ? __pfx_worker_thread+0x10/0x1 0 [ 16.460144] kthread+0xe0/0x11 0 [ 16.460372] ? __pfx_kthread+0x10/0x1 0 [ 16.460640] ret_from_fork+0x31/0x5 0 [ 16.460896] ? __pfx_kthread+0x10/0x1 0 [ 16.461166] ret_from_fork_asm+0x1a/0x3 0 [ 16.461453] </TASK > [ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ] [ 16.462134] CR2: 000000000000003 0 [ 16.462380] ---[ end trace 0000000000000000 ]--- [ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590 The direct cause of this issue is that after smc_listen_out_connected(), newclcsock->sk may be NULL since it will releases the smcsk. Therefore, if the application closes the socket immediately after accept, newclcsock->sk can be NULL. A possible execution order could be as follows: smc_listen_work | userspace ----------------------------------------------------------------- lock_sock(sk) | smc_listen_out_connected() | | \- smc_listen_out | | | \- release_sock | | |- sk->sk_data_ready() | | fd = accept(); | close(fd); | \- socket->sk = NULL; /* newclcsock->sk is NULL now */ SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk)) Since smc_listen_out_connected() will not fail, simply swapping the order of the code can easily fix this issue.

In the Linux kernel, the following vulnerability has been resolved: zloop: fix KASAN use-after-free of tag set When a zoned loop device, or zloop device, is removed, KASAN enabled kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The BUG happens because zloop_ctl_remove() calls put_disk(), which invokes zloop_free_disk(). The zloop_free_disk() frees the memory allocated for the zlo pointer. However, after the memory is freed, zloop_ctl_remove() calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo. Hence the KASAN use-after-free. zloop_ctl_remove() put_disk(zlo->disk) put_device() kobject_put() ... zloop_free_disk() kvfree(zlo) blk_mq_free_tag_set(&zlo->tag_set) To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set) from zloop_ctl_remove() into zloop_free_disk(). This ensures that the tag_set is freed before the call to kvfree(zlo).

In the Linux kernel, the following vulnerability has been resolved: bpf: Do not include stack ptr register in precision backtracking bookkeeping Yi Lai reported an issue ([1]) where the following warning appears in kernel dmesg: [ 60.643604] verifier backtracking bug [ 60.643635] WARNING: CPU: 10 PID: 2315 at kernel/bpf/verifier.c:4302 __mark_chain_precision+0x3a6c/0x3e10 [ 60.648428] Modules linked in: bpf_testmod(OE) [ 60.650471] CPU: 10 UID: 0 PID: 2315 Comm: test_progs Tainted: G OE 6.15.0-rc4-gef11287f8289-dirty #327 PREEMPT(full) [ 60.654385] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 60.656682] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 60.660475] RIP: 0010:__mark_chain_precision+0x3a6c/0x3e10 [ 60.662814] Code: 5a 30 84 89 ea e8 c4 d9 01 00 80 3d 3e 7d d8 04 00 0f 85 60 fa ff ff c6 05 31 7d d8 04 01 48 c7 c7 00 58 30 84 e8 c4 06 a5 ff <0f> 0b e9 46 fa ff ff 48 ... [ 60.668720] RSP: 0018:ffff888116cc7298 EFLAGS: 00010246 [ 60.671075] RAX: 54d70e82dfd31900 RBX: ffff888115b65e20 RCX: 0000000000000000 [ 60.673659] RDX: 0000000000000001 RSI: 0000000000000004 RDI: 00000000ffffffff [ 60.676241] RBP: 0000000000000400 R08: ffff8881f6f23bd3 R09: 1ffff1103ede477a [ 60.678787] R10: dffffc0000000000 R11: ffffed103ede477b R12: ffff888115b60ae8 [ 60.681420] R13: 1ffff11022b6cbc4 R14: 00000000fffffff2 R15: 0000000000000001 [ 60.684030] FS: 00007fc2aedd80c0(0000) GS:ffff88826fa8a000(0000) knlGS:0000000000000000 [ 60.686837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 60.689027] CR2: 000056325369e000 CR3: 000000011088b002 CR4: 0000000000370ef0 [ 60.691623] Call Trace: [ 60.692821] <TASK> [ 60.693960] ? __pfx_verbose+0x10/0x10 [ 60.695656] ? __pfx_disasm_kfunc_name+0x10/0x10 [ 60.697495] check_cond_jmp_op+0x16f7/0x39b0 [ 60.699237] do_check+0x58fa/0xab10 ... Further analysis shows the warning is at line 4302 as below: 4294 /* static subprog call instruction, which 4295 * means that we are exiting current subprog, 4296 * so only r1-r5 could be still requested as 4297 * precise, r0 and r6-r10 or any stack slot in 4298 * the current frame should be zero by now 4299 */ 4300 if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) { 4301 verbose(env, "BUG regs %x\n", bt_reg_mask(bt)); 4302 WARN_ONCE(1, "verifier backtracking bug"); 4303 return -EFAULT; 4304 } With the below test (also in the next patch): __used __naked static void __bpf_jmp_r10(void) { asm volatile ( "r2 = 2314885393468386424 ll;" "goto +0;" "if r2 <= r10 goto +3;" "if r1 >= -1835016 goto +0;" "if r2 <= 8 goto +0;" "if r3 <= 0 goto +0;" "exit;" ::: __clobber_all); } SEC("?raw_tp") __naked void bpf_jmp_r10(void) { asm volatile ( "r3 = 0 ll;" "call __bpf_jmp_r10;" "r0 = 0;" "exit;" ::: __clobber_all); } The following is the verifier failure log: 0: (18) r3 = 0x0 ; R3_w=0 2: (85) call pc+2 caller: R10=fp0 callee: frame1: R1=ctx() R3_w=0 R10=fp0 5: frame1: R1=ctx() R3_w=0 R10=fp0 ; asm volatile (" \ @ verifier_precision.c:184 5: (18) r2 = 0x20202000256c6c78 ; frame1: R2_w=0x20202000256c6c78 7: (05) goto pc+0 8: (bd) if r2 <= r10 goto pc+3 ; frame1: R2_w=0x20202000256c6c78 R10=fp0 9: (35) if r1 >= 0xffe3fff8 goto pc+0 ; frame1: R1=ctx() 10: (b5) if r2 <= 0x8 goto pc+0 mark_precise: frame1: last_idx 10 first_idx 0 subseq_idx -1 mark_precise: frame1: regs=r2 stack= before 9: (35) if r1 >= 0xffe3fff8 goto pc+0 mark_precise: frame1: regs=r2 stack= before 8: (bd) if r2 <= r10 goto pc+3 mark_preci ---truncated---

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: unlink NAPIs from queues on error to open CI hit a UaF in fbnic in the AF_XDP portion of the queues.py test. The UaF is in the __sk_mark_napi_id_once() call in xsk_bind(), NAPI has been freed. Looks like the device failed to open earlier, and we lack clearing the NAPI pointer from the queue.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Check validity of "num_cpu" from user space The maximum supported cpu number is EIOINTC_ROUTE_MAX_VCPUS about irqchip EIOINTC, here add validation about cpu number to avoid array pointer overflow.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9375: Fix double free of regulator supplies Driver gets regulator supplies in probe path with devm_regulator_bulk_get(), so should not call regulator_bulk_free() in error and remove paths to avoid double free.

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: uart: Set tty->disc_data only in success path Setting tty->disc_data before opening the NCI device means we need to clean it up on error paths. This also opens some short window if device starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded (broken hardware?). Close the window by exposing tty->disc_data only on the success path, when opening of the NCI device and try_module_get() succeeds. The code differs in error path in one aspect: tty->disc_data won't be ever assigned thus NULL-ified. This however should not be relevant difference, because of "tty->disc_data=NULL" in nci_uart_tty_open().

In the Linux kernel, the following vulnerability has been resolved: perf/core: Prevent VMA split of buffer mappings The perf mmap code is careful about mmap()'ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping.

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated via devm_kzalloc() to store touch bar keyboard related data. Later on if backlight_device_get_by_name() finds a backlight device with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup with appletb_inactivity_timer() and the timer is armed to run after appletb_tb_dim_timeout (60) seconds. A use-after-free is triggered when failure occurs after the timer is armed. This ultimately means probe failure occurs and as a result the "struct appletb_kbd *kbd" which is device managed memory is freed. After 60 seconds the timer will have expired and __run_timers will attempt to access the timer (kbd->inactivity_timer) however the kdb structure has been freed causing a use-after free. [ 71.636938] ================================================================== [ 71.637915] BUG: KASAN: slab-use-after-free in __run_timers+0x7ad/0x890 [ 71.637915] Write of size 8 at addr ffff8881178c5958 by task swapper/1/0 [ 71.637915] [ 71.637915] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.16.0-rc2-00318-g739a6c93cc75-dirty #12 PREEMPT(voluntary) [ 71.637915] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 71.637915] Call Trace: [ 71.637915] <IRQ> [ 71.637915] dump_stack_lvl+0x53/0x70 [ 71.637915] print_report+0xce/0x670 [ 71.637915] ? __run_timers+0x7ad/0x890 [ 71.637915] kasan_report+0xce/0x100 [ 71.637915] ? __run_timers+0x7ad/0x890 [ 71.637915] __run_timers+0x7ad/0x890 [ 71.637915] ? __pfx___run_timers+0x10/0x10 [ 71.637915] ? update_process_times+0xfc/0x190 [ 71.637915] ? __pfx_update_process_times+0x10/0x10 [ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0 [ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0 [ 71.637915] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 71.637915] run_timer_softirq+0x141/0x240 [ 71.637915] ? __pfx_run_timer_softirq+0x10/0x10 [ 71.637915] ? __pfx___hrtimer_run_queues+0x10/0x10 [ 71.637915] ? kvm_clock_get_cycles+0x18/0x30 [ 71.637915] ? ktime_get+0x60/0x140 [ 71.637915] handle_softirqs+0x1b8/0x5c0 [ 71.637915] ? __pfx_handle_softirqs+0x10/0x10 [ 71.637915] irq_exit_rcu+0xaf/0xe0 [ 71.637915] sysvec_apic_timer_interrupt+0x6c/0x80 [ 71.637915] </IRQ> [ 71.637915] [ 71.637915] Allocated by task 39: [ 71.637915] kasan_save_stack+0x33/0x60 [ 71.637915] kasan_save_track+0x14/0x30 [ 71.637915] __kasan_kmalloc+0x8f/0xa0 [ 71.637915] __kmalloc_node_track_caller_noprof+0x195/0x420 [ 71.637915] devm_kmalloc+0x74/0x1e0 [ 71.637915] appletb_kbd_probe+0x37/0x3c0 [ 71.637915] hid_device_probe+0x2d1/0x680 [ 71.637915] really_probe+0x1c3/0x690 [ 71.637915] __driver_probe_device+0x247/0x300 [ 71.637915] driver_probe_device+0x49/0x210 [...] [ 71.637915] [ 71.637915] Freed by task 39: [ 71.637915] kasan_save_stack+0x33/0x60 [ 71.637915] kasan_save_track+0x14/0x30 [ 71.637915] kasan_save_free_info+0x3b/0x60 [ 71.637915] __kasan_slab_free+0x37/0x50 [ 71.637915] kfree+0xcf/0x360 [ 71.637915] devres_release_group+0x1f8/0x3c0 [ 71.637915] hid_device_probe+0x315/0x680 [ 71.637915] really_probe+0x1c3/0x690 [ 71.637915] __driver_probe_device+0x247/0x300 [ 71.637915] driver_probe_device+0x49/0x210 [...] The root cause of the issue is that the timer is not disarmed on failure paths leading to it remaining active and accessing freed memory. To fix this call timer_delete_sync() to deactivate the timer. Another small issue is that timer_delete_sync is called unconditionally in appletb_kbd_remove(), fix this by checking for a valid kbd->backlight_dev before calling timer_delete_sync.

In the Linux kernel, the following vulnerability has been resolved: ext4: ignore xattrs past end Once inside 'ext4_xattr_inode_dec_ref_all' we should ignore xattrs entries past the 'end' entry. This fixes the following KASAN reported issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 Read of size 4 at addr ffff888012c120c4 by task repro/2065 CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1fd/0x300 ? tcp_gro_dev_warn+0x260/0x260 ? _printk+0xc0/0x100 ? read_lock_is_recursive+0x10/0x10 ? irq_work_queue+0x72/0xf0 ? __virt_addr_valid+0x17b/0x4b0 print_address_description+0x78/0x390 print_report+0x107/0x1f0 ? __virt_addr_valid+0x17b/0x4b0 ? __virt_addr_valid+0x3ff/0x4b0 ? __phys_addr+0xb5/0x160 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 kasan_report+0xcc/0x100 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ? ext4_xattr_delete_inode+0xd30/0xd30 ? __ext4_journal_ensure_credits+0x5f0/0x5f0 ? __ext4_journal_ensure_credits+0x2b/0x5f0 ? inode_update_timestamps+0x410/0x410 ext4_xattr_delete_inode+0xb64/0xd30 ? ext4_truncate+0xb70/0xdc0 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20 ? __ext4_mark_inode_dirty+0x670/0x670 ? ext4_journal_check_start+0x16f/0x240 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0 ext4_evict_inode+0xc8c/0xff0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 ? do_raw_spin_unlock+0x53/0x8a0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 evict+0x4ac/0x950 ? proc_nr_inodes+0x310/0x310 ? trace_ext4_drop_inode+0xa2/0x220 ? _raw_spin_unlock+0x1a/0x30 ? iput+0x4cb/0x7e0 do_unlinkat+0x495/0x7c0 ? try_break_deleg+0x120/0x120 ? 0xffffffff81000000 ? __check_object_size+0x15a/0x210 ? strncpy_from_user+0x13e/0x250 ? getname_flags+0x1dc/0x530 __x64_sys_unlinkat+0xc8/0xf0 do_syscall_64+0x65/0x110 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x434ffd Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107 RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001 </TASK> The buggy address belongs to the object at ffff888012c12000 which belongs to the cache filp of size 360 The buggy address is located 196 bytes inside of freed 360-byte region [ffff888012c12000, ffff888012c12168) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x40(head|node=0|zone=0) page_type: f5(slab) raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888012c12180: fc fc fc fc fc fc fc fc fc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix sc7280 lpass potential buffer overflow Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: fix PM resume warning Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nan ---truncated---

In the Linux kernel, the following vulnerability has been resolved: parisc: Fix double SIGFPE crash Camm noticed that on parisc a SIGFPE exception will crash an application with a second SIGFPE in the signal handler. Dave analyzed it, and it happens because glibc uses a double-word floating-point store to atomically update function descriptors. As a result of lazy binding, we hit a floating-point store in fpe_func almost immediately. When the T bit is set, an assist exception trap occurs when when the co-processor encounters *any* floating-point instruction except for a double store of register %fr0. The latter cancels all pending traps. Let's fix this by clearing the Trap (T) bit in the FP status register before returning to the signal handler in userspace. The issue can be reproduced with this test program: root@parisc:~# cat fpe.c static void fpe_func(int sig, siginfo_t *i, void *v) { sigset_t set; sigemptyset(&set); sigaddset(&set, SIGFPE); sigprocmask(SIG_UNBLOCK, &set, NULL); printf("GOT signal %d with si_code %ld\n", sig, i->si_code); } int main() { struct sigaction action = { .sa_sigaction = fpe_func, .sa_flags = SA_RESTART|SA_SIGINFO }; sigaction(SIGFPE, &action, 0); feenableexcept(FE_OVERFLOW); return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308); } root@parisc:~# gcc fpe.c -lm root@parisc:~# ./a.out Floating point exception root@parisc:~# strace -f ./a.out execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 ... rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} --- --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} --- +++ killed by SIGFPE +++ Floating point exception

In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning: UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25 load of value 255 is not a valid value for type '_Bool' This is because playback_only is uninitialized and is not written to, as the playback-only property is absent.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mode1 reset crash issue If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal user space to abort the processes. After process abort exit, user queues still use the GPU to access system memory before h/w is reset while KFD cleanup worker free system memory and free VRAM. There is use-after-free race bug that KFD allocate and reuse the freed system memory, and user queue write to the same system memory to corrupt the data structure and cause driver crash. To fix this race, KFD cleanup worker terminate user queues, then flush reset_domain wq to wait for any GPU ongoing reset complete, and then free outstanding BOs.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue When the task management thread processes reply queues while the reset thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as unrecoverable.

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix potential out-of-bound write If the caller wrote more characters, count is truncated to the max available space in "simple_write_to_buffer". Check that the input size does not exceed the buffer size. Write a zero termination afterwards.

Buffer overflow in i40e driver for Intel(R) Ethernet 700 Series Controllers versions before 7.0 may allow an authenticated user to potentially enable an escalation of privilege via local access.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to avoid crashes like bellow: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406 Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341 CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406 hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x711/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 5987: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252 mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279 remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 sock_write_iter+0x258/0x330 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x548/0xa90 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5989: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2380 [inline] slab_free mm/slub.c:4642 [inline] kfree+0x18e/0x440 mm/slub.c:4841 mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242 mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366 hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314 __sys_bind_socket net/socket.c:1810 [inline] __sys_bind+0x2c3/0x3e0 net/socket.c:1841 __do_sys_bind net/socket.c:1846 [inline] __se_sys_bind net/socket.c:1844 [inline] __x64_sys_bind+0x7a/0x90 net/socket.c:1844 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use local fence in error path of xe_migrate_clear The intent of the error path in xe_migrate_clear is to wait on locally generated fence and then return. The code is waiting on m->fence which could be the local fence but this is only stable under the job mutex leading to a possible UAF. Fix code to wait on local fence. (cherry picked from commit 762b7e95362170b3e13a8704f38d5e47eca4ba74)

In the Linux kernel, the following vulnerability has been resolved: crypto: lzo - Fix compression buffer overrun Unlike the decompression code, the compression code in LZO never checked for output overruns. It instead assumes that the caller always provides enough buffer space, disregarding the buffer length provided by the caller. Add a safe compression interface that checks for the end of buffer before each write. Use the safe interface in crypto/lzo.

In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Protect mgmt_pending list with its own lock This uses a mutex to protect from concurrent access of mgmt_pending list which can cause crashes like: ================================================================== BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91 Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318 CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 print_address_description+0xa8/0x254 mm/kasan/report.c:408 print_report+0x68/0x84 mm/kasan/report.c:521 kasan_report+0xb0/0x110 mm/kasan/report.c:634 __asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379 hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91 mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223 pending_find net/bluetooth/mgmt.c:947 [inline] remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445 hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x25c/0x378 net/socket.c:1131 new_sync_write fs/read_write.c:591 [inline] vfs_write+0x62c/0x97c fs/read_write.c:684 ksys_write+0x120/0x210 fs/read_write.c:736 __do_sys_write fs/read_write.c:747 [inline] __se_sys_write fs/read_write.c:744 [inline] __arm64_sys_write+0x7c/0x90 fs/read_write.c:744 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Allocated by task 7037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4327 [inline] __kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198 sk_alloc+0x44/0x3ac net/core/sock.c:2254 bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148 hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202 bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132 __sock_create+0x43c/0x91c net/socket.c:1541 sock_create net/socket.c:1599 [inline] __sys_socket_create net/socket.c:1636 [inline] __sys_socket+0xd4/0x1c0 net/socket.c:1683 __do_sys_socket net/socket.c:1697 [inline] __se_sys_socket net/socket.c:1695 [inline] __arm64_sys_socket+0x7c/0x94 net/socket.c:1695 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Freed by task 6607: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x68/0x88 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Abort software beacon handling if disabled A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices The driver only offloads neighbors that are constructed on top of net devices registered by it or their uppers (which are all Ethernet). The device supports GRE encapsulation and decapsulation of forwarded traffic, but the driver will not offload dummy neighbors constructed on top of GRE net devices as they are not uppers of its net devices: # ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1 # ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1 $ ip neigh show dev gre1 nud noarp 0.0.0.0 lladdr 0.0.0.0 NOARP (Note that the neighbor is not marked with 'offload') When the driver is reloaded and the existing configuration is replayed, the driver does not perform the same check regarding existing neighbors and offloads the previously added one: # devlink dev reload pci/0000:01:00.0 $ ip neigh show dev gre1 nud noarp 0.0.0.0 lladdr 0.0.0.0 offload NOARP If the neighbor is later deleted, the driver will ignore the notification (given the GRE net device is not its upper) and will therefore keep referencing freed memory, resulting in a use-after-free [1] when the net device is deleted: # ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1 # ip link del dev gre1 Fix by skipping neighbor replay if the net device for which the replay is performed is not our upper. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200 Read of size 8 at addr ffff888155b0e420 by task ip/2282 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 mlxsw_sp_neigh_entry_update+0x1ea/0x200 mlxsw_sp_router_rif_gone_sync+0x2a8/0x440 mlxsw_sp_rif_destroy+0x1e9/0x750 mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0 mlxsw_sp_router_netdevice_event+0x3ac/0x15e0 notifier_call_chain+0xca/0x150 call_netdevice_notifiers_info+0x7f/0x100 unregister_netdevice_many_notify+0xc8c/0x1d90 rtnl_dellink+0x34e/0xa50 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: mm, slab: clean up slab->obj_exts always When memory allocation profiling is disabled at runtime or due to an error, shutdown_mem_profiling() is called: slab->obj_exts which previously allocated remains. It won't be cleared by unaccount_slab() because of mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts should always be cleaned up in unaccount_slab() to avoid following error: [...]BUG: Bad page state in process... .. [...]page dumped because: page still charged to cgroup [andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user]