An issue was discovered in Icinga 2.x through 2.8.1. By editing the init.conf file, Icinga 2 can be run as root. Following this the program can be used to run arbitrary code as root. This was fixed by no longer using init.conf to determine account information for any root-executed code (a larger issue than CVE-2017-16933).

An issue was discovered in Icinga2 before v2.12.0-rc1. The prepare-dirs script (run as part of the icinga2 systemd service) executes chmod 2750 /run/icinga2/cmd. /run/icinga2 is under control of an unprivileged user by default. If /run/icinga2/cmd is a symlink, then it will by followed and arbitrary files can be changed to mode 2750 by the unprivileged icinga2 user.

An issue was discovered in Icinga 2.x through 2.8.1. The daemon creates an icinga2.pid file after dropping privileges to a non-root account, which might allow local users to kill arbitrary processes by leveraging access to this non-root account for icinga2.pid modification before a root script executes a "kill `cat /pathname/icinga2.pid`" command, as demonstrated by icinga2.init.d.cmake.

etc/initsystem/prepare-dirs in Icinga 2.x through 2.8.1 has a chown call for a filename in a user-writable directory, which allows local users to gain privileges by leveraging access to the $ICINGA2_USER account for creation of a link.

A Local Privilege Escalation in libqcocoa.dylib in Foxit Reader 3.1.0.0111 on macOS has been discovered due to an incorrect permission set.

Dovecot 1.2.x before 1.2.8 sets 0777 permissions during creation of certain directories at installation time, which allows local users to access arbitrary user accounts by replacing the auth socket, related to the parent directories of the base_dir directory, and possibly the base_dir directory itself.

Wrong permissions in configuration file can lead to unauthorized permission in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9150, MDM9607, MDM9650, MSM8909W, MSM8996AU, QCS405, QCS605, SD 210/SD 212/SD 205, SD 615/16/SD 415, SD 636, SD 712 / SD 710 / SD 670, SD 820, SD 820A, SD 855, SDA660, SDM660, SDX20, SDX24

Anaconda Anaconda3 (Anaconda Distribution) through 2021.11.0.0 and Miniconda3 through 4.11.0.0 can create a world-writable directory under %PROGRAMDATA% and place that directory into the system PATH environment variable. Thus, for example, local users can gain privileges by placing a Trojan horse file into that directory. (This problem can only happen in a non-default installation. The person who installs the product must specify that it is being installed for all users. Also, the person who installs the product must specify that the system PATH should be changed.

In IXP EasyInstall 6.2.13723, there is Lateral Movement (using the Agent Service) against other users on a client system. An authenticated attacker can, by modifying %SYSTEMDRIVE%\IXP\SW\[PACKAGE_CODE]\EveryLogon.bat, achieve this movement and execute code in the context of other users.

Max Secure Anti Virus Plus 19.0.4.020 has Insecure Permissions on the installation directory. Local attackers can replace a .exe or .dll file to achieve privilege escalation.

Insecure inherited permissions in Intel(R) PROSet/Wireless WiFi products before version 21.70 on Windows 10 may allow an authenticated user to potentially enable escalation of privilege via local access.

Insecure inherited permissions in some Intel(R) PROSet/Wireless WiFi products on Windows* 7 and 8.1 before version 21.40.5.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

Scanguard through 2019-11-12 on Windows has Insecure Permissions for the installation directory, leading to privilege escalation via a Trojan horse executable file.

GNU Guix 1.0.1 allows local users to gain access to an arbitrary user's account because the parent directory of the user-profile directories is world writable, a similar issue to CVE-2019-17365.

A vulnerability in the filesystem management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker with administrator rights to gain elevated privileges as the root user on an affected device. The vulnerability is due to overly permissive file permissions of specific system files. An attacker could exploit this vulnerability by authenticating to an affected device, creating a crafted command string, and writing this crafted string to a specific file location. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid administrator credentials for the device.

A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level to root. The attacker must authenticate with valid user credentials. The vulnerability is due to incorrect permissions of a system executable. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level to root. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

In the Activity Manager service, there is a possible permission bypass due to incorrect permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: AndroidVersions: Android-10Android ID: A-124539196

3CX Phone 15 on Windows has insecure permissions on the "%PROGRAMDATA%\3CXPhone for Windows\PhoneApp" installation directory, allowing Full Control access for Everyone, and leading to privilege escalation because of a StartUp link.

In Total Defense Anti-virus 9.0.0.773, insecure access control for the directory %PROGRAMDATA%\TotalDefense\Consumer\ISS\9\bd\TDUpdate2\ used by AMRT.exe allows local attackers to hijack bdcore.dll, which leads to privilege escalation when the AMRT service loads the DLL.

Synaman v5.1 and below was discovered to contain weak file permissions which allows authenticated attackers to escalate privileges.

An issue was discovered on the ENTTEC Datagate MK2, Storm 24, Pixelator, and E-Streamer MK2 with firmware 70044_update_05032019-482. They replace secure and protected directory permissions (set as default by the underlying operating system) with highly insecure read, write, and execute directory permissions for all users. By default, /usr/local and all of its subdirectories should have permissions set to only allow non-privileged users to read and execute from the tree structure, and to deny users from creating or editing files in this location. The ENTTEC firmware startup script permits all users to read, write, and execute (rwxrwxrwx) from the /usr, /usr/local, /usr/local/dmxis, and /usr/local/bin/ directories.

In Firejail before 0.9.60, seccomp filters are writable inside the jail, leading to a lack of intended seccomp restrictions for a process that is joined to the jail after a filter has been modified by an attacker.

extenua SilverSHielD 6.x fails to secure its ProgramData folder, leading to a Local Privilege Escalation to SYSTEM. The attacker must replace SilverShield.config.sqlite with a version containing an additional user account, and then use SSH and port forwarding to reach a 127.0.0.1 service.

A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The macOS binary openvpn_launcher.64 is setuid root. This binary creates /tmp/pia_upscript.sh when executed. Because the file creation mask (umask) is not reset, the umask value is inherited from the calling process. This value can be manipulated to cause the privileged binary to create files with world writable permissions. A local unprivileged user can modify /tmp/pia_upscript.sh during the connect process to execute arbitrary code as the root user.

Moby is an open-source project created by Docker to enable and accelerate software containerization. A bug was found in Moby (Docker Engine) prior to version 20.10.14 where containers were incorrectly started with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during `execve(2)`. Normally, when executable programs have specified permitted file capabilities, otherwise unprivileged users and processes can execute those programs and gain the specified file capabilities up to the bounding set. Due to this bug, containers which included executable programs with inheritable file capabilities allowed otherwise unprivileged users and processes to additionally gain these inheritable file capabilities up to the container's bounding set. Containers which use Linux users and groups to perform privilege separation inside the container are most directly impacted. This bug did not affect the container security sandbox as the inheritable set never contained more capabilities than were included in the container's bounding set. This bug has been fixed in Moby (Docker Engine) 20.10.14. Running containers should be stopped, deleted, and recreated for the inheritable capabilities to be reset. This fix changes Moby (Docker Engine) behavior such that containers are started with a more typical Linux environment. As a workaround, the entry point of a container can be modified to use a utility like `capsh(1)` to drop inheritable capabilities prior to the primary process starting.

Improper file permissions in the installer for the Intel(R) Media SDK for Windows before version 2019 R1 may allow an authenticated user to potentially enable escalation of privilege via local access.

Improper file permission in software installer for Intel(R) Smart Connect Technology for Intel(R) NUC may allow an authenticated user to potentially enable escalation of privilege via local access.

Improper directory permissions in the installer for Intel(R) Quartus(R) software may allow an authenticated user to potentially enable escalation of privilege via local access.

Insufficient access control vulnerability in Dynamic Application Loader software for Intel(R) CSME before versions 11.8.65, 11.11.65, 11.22.65, 12.0.35 and Intel(R) TXE 3.1.65, 4.0.15 may allow an unprivileged user to potentially enable escalation of privilege via local access.

Improper directory permissions in Intel(R) ACU Wizard version 12.0.0.129 and earlier may allow an authenticated user to potentially enable escalation of privilege via local access.

An elevation of privilege vulnerability exists when NTFS improperly checks access, aka "NTFS Elevation of Privilege Vulnerability." This affects Windows 7, Windows Server 2012 R2, Windows RT 8.1, Windows Server 2008, Windows Server 2019, Windows Server 2012, Windows 8.1, Windows Server 2016, Windows Server 2008 R2, Windows 10, Windows 10 Servers.

\ProgramData\WebLog Expert\WebServer\WebServer.cfg in WebLog Expert Web Server Enterprise 9.4 has weak permissions (BUILTIN\Users:(ID)C), which allows local users to set a cleartext password and login as admin.

An issue was discovered in an npm 5.7.0 2018-02-21 pre-release (marked as "next: 5.7.0" and therefore automatically installed by an "npm upgrade -g npm" command, and also announced in the vendor's blog without mention of pre-release status). It might allow local users to bypass intended filesystem access restrictions because ownerships of /etc and /usr directories are being changed unexpectedly, related to a "correctMkdir" issue.

NVIDIA Jetson TX2 contains a vulnerability in the kernel driver where input/output control (IOCTL) handling for user mode requests could create a non-trusted pointer dereference, which may lead to information disclosure, denial of service, escalation of privileges, or code execution. The updates apply to all versions prior to R28.3.

An issue was discovered in MalwareFox AntiMalware 2.74.0.150. Improper access control in zam32.sys and zam64.sys allows a non-privileged process to register itself with the driver by sending IOCTL 0x80002010 and then using IOCTL 0x8000204C to \\.\ZemanaAntiMalware to elevate privileges.

A Incorrect Permission Assignment for Critical Resource vulnerability in the sudoers configuration in cscreen of openSUSE Factory allows any local users to gain the privileges of the tty and dialout groups and access and manipulate any running cscreen seesion. This issue affects: openSUSE Factory cscreen version 1.2-1.3 and prior versions.

In ServiceManager::add function in the hardware service manager, there is an insecure permissions check based on the PID of the caller. This could allow an app to add or replace a HAL service with its own service, gaining code execution in a privileged process.Product: AndroidVersions: Android-8.0 Android-8.1 Android-9Android ID: A-121035042Upstream kernel

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis VSS Doctor (Windows) before build 53

A vulnerability allows local attackers to escalate privilege on Rapid Scada 5.5.0 because of weak C:\SCADA permissions. The specific flaw exists within the access control that is set and modified during the installation of the product. The product sets weak access control restrictions. An attacker can leverage this vulnerability to execute arbitrary code under the context of Administrator, the IUSR account, or SYSTEM.

An issue was discovered in Ricoh (including Savin and Lanier) Windows printer drivers prior to 2020 that allows attackers local privilege escalation. Affected drivers and versions are: PCL6 Driver for Universal Print - Version 4.0 or later PS Driver for Universal Print - Version 4.0 or later PC FAX Generic Driver - All versions Generic PCL5 Driver - All versions RPCS Driver - All versions PostScript3 Driver - All versions PCL6 (PCL XL) Driver - All versions RPCS Raster Driver - All version

A vulnerability has been found in Heimdal PRO v2.2.190, but it is most likely also present in Heimdal FREE and Heimdal CORP. Faulty permissions on the directory "C:\ProgramData\Heimdal Security\Heimdal Agent" allow BUILTIN\Users to write new files to the directory. On startup, the process Heimdal.MonitorServices.exe running as SYSTEM will attempt to load version.dll from this directory. Placing a malicious version.dll in this directory will result in privilege escalation. NOTE: any affected Heimdal products are completely unrelated to the Heimdal vendor of a Kerberos 5 product on the h5l.org web site.

ovirt-engine 3.2 running on Linux kernel 3.1 and newer creates certain files world-writeable due to an upstream kernel change which impacted how python's os.chmod() works when passed a mode of '-1'.

The ruby_parser-legacy (aka legacy) gem 1.0.0 for Ruby allows local privilege escalation because of world-writable files. For example, if the brakeman gem (which has a legacy dependency) 4.5.0 through 4.7.0 is used, a local user can insert malicious code into the ruby_parser-legacy-1.0.0/lib/ruby_parser/legacy/ruby_parser.rb file.

A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

Improper permissions in the installer for the ITE Tech* Consumer Infrared Driver for Windows 10 versions before 5.4.3.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

Valve Steam Client for Windows through 2019-08-16 allows privilege escalation (to NT AUTHORITY\SYSTEM) because local users can replace the current versions of SteamService.exe and SteamService.dll with older versions that lack the CVE-2019-14743 patch.

Improper directory permissions in the installer for the Intel Parallel Studio before 2019 Gold may allow authenticated users to potentially enable an escalation of privilege via local access.

Realtek Waves MaxxAudio driver 1.6.2.0, as used on Dell laptops, installs with incorrect file permissions. As a result, a local attacker can escalate to SYSTEM.

Improper directory permissions in the installer for the Intel(R) SSD Data Center Tool for Windows before v3.0.17 may allow authenticated users to potentially enable an escalation of privilege via local access.

In Total Defense Anti-virus 9.0.0.773, insecure access control for the directory %PROGRAMDATA%\TotalDefense\Consumer\ISS\9\ used by ccschedulersvc.exe allows local attackers to hijack dotnetproxy.exe, which leads to privilege escalation when the ccSchedulerSVC service runs the executable.