Buffer overflow in the back-end component in Huawei UTPS 1.0 allows local users to gain privileges via a long IDS_PLUGIN_NAME string in a plug-in configuration file.

The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en.

There is a vulnerability when configuring permission isolation in smartphones. Successful exploitation of this vulnerability may cause out-of-bounds access.

The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en.

Buffer overflow in the Smart DNS functionality in the Huawei NGFW Module and Secospace USG6300, USG6500, USG6600, and USG9500 firewalls with software before V500R001C20SPC100 allows remote attackers to cause a denial of service or execute arbitrary code via a crafted packet, related to "illegitimate parameters."

Buffer overflow in the Application Specific Packet Filtering (ASPF) functionality in the Huawei IPS Module, NGFW Module, NIP6300, NIP6600, Secospace USG6300, USG6500, USG6600, USG9500, and AntiDDoS8000 devices with software before V500R001C20SPC100 allows remote attackers to cause a denial of service or execute arbitrary code via a crafted packet, related to "illegitimate parameters."

Buffer overflow in Huawei Mate8 NXT-AL before NXT-AL10C00B182, NXT-CL before NXT-CL00C92B182, NXT-DL before NXT-DL00C17B182, and NXT-TL before NXT-TL00C01B182 allows attackers to cause a denial of service (system crash) via a crafted app.

Buffer overflow in the Wi-Fi driver in Huawei Mate 8 NXT-AL before NXT-AL10C00B182, NXT-CL before NXT-CL00C92B182, NXT-DL before NXT-DL00C17B182, and NXT-TL before NXT-TL00C01B182 allows attackers to cause a denial of service (crash) or possibly gain privileges via a crafted application, aka HWPSIRT-2016-03021.

The boot loaders of P10 and P10 Plus Huawei mobile phones with software the versions before Victoria-L09AC605B162, the versions before Victoria-L29AC605B162, the versions before Vicky-L29AC605B162 have an out-of-bounds memory access vulnerability due to the lack of parameter validation. An attacker with the root privilege of an Android system may trick a user into installing a malicious APP. the APP can modify specific data to cause buffer overflow in the next system reboot, causing out-of-bounds memory read which can continuous system reboot.

There is a memory address out of bounds in smartphones. Successful exploitation of this vulnerability may cause malicious code to be executed.

Electronic Numbers to URI Mapping (ENUM) module in some Huawei products DP300 V500R002C00, RP200 V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have a buffer error vulnerability. An unauthenticated, remote attacker has to control the peer device and send specially crafted ENUM packets to the affected products. Due to insufficient verification of some values in the packets, successful exploit may cause buffer error and some services abnormal.

The inputhub driver of HUAWEI P9 Lite mobile phones with Versions earlier than VNS-L21C02B341, Versions earlier than VNS-L21C22B380, Versions earlier than VNS-L31C02B341, Versions earlier than VNS-L31C440B390, Versions earlier than VNS-L31C636B396 has a buffer overflow vulnerability due to the lack of parameter validation. An attacker tricks a user into installing a malicious APP and the APP may sends specific data to the inputhub driver to exploit this vulnerability, successful exploit could cause the system reboot.

Heap-based buffer overflow in the HIFI driver in Huawei P8 smartphones with software GRA-TL00 before GRA-TL00C01B230, GRA-CL00 before GRA-CL00C92B230, GRA-CL10 before GRA-CL10C92B230, GRA-UL00 before GRA-UL00C00B230, and GRA-UL10 before GRA-UL10C00B230, and Mate S smartphones with software CRR-TL00 before CRR-TL00C01B160SP01, CRR-UL00 before CRR-UL00C00B160, and CRR-CL00 before CRR-CL00C92B161 allows attackers to cause a denial of service (system crash) or gain privileges via a crafted application, a different vulnerability than CVE-2015-8319.

Buffer overflow in the HIFI driver in Huawei P8 phones with software GRA-TL00 before GRA-TL00C01B230, GRA-CL00 before GRA-CL00C92B230, GRA-CL10 before GRA-CL10C92B230, GRA-UL00 before GRA-UL00C00B230, and GRA-UL10 before GRA-UL10C00B230 allows attackers to cause a denial of service (system crash) or execute arbitrary code via an unspecified parameter.

Heap-based buffer overflow in the HIFI driver in Huawei Mate 7 phones with software MT7-UL00 before MT7-UL00C17B354, MT7-TL10 before MT7-TL10C00B354, MT7-TL00 before MT7-TL00C01B354, and MT7-CL00 before MT7-CL00C92B354 and P8 phones with software GRA-TL00 before GRA-TL00C01B220SP01, GRA-CL00 before GRA-CL00C92B220, GRA-CL10 before GRA-CL10C92B220, GRA-UL00 before GRA-UL00C00B220, and GRA-UL10 before GRA-UL10C00B220 allows attackers to cause a denial of service (reboot) or execute arbitrary code via a crafted application.

Some Huawei smart speakers have a memory overflow vulnerability. Successful exploitation of this vulnerability may cause certain functions to fail.

Buffer overflow in Huawei VP9660, VP9650, and VP9630 multipoint control unit devices with software before V500R002C00SPC200 and RSE6500 videoconference devices with software before V500R002C00SPC100, when an unspecified service is enabled, allows remote attackers to execute arbitrary code via a crafted packet, aka HWPSIRT-2016-05054.

The camerafs driver in Mate 9 Versions earlier than MHA-AL00BC00B173 has buffer overflow vulnerability. An attacker tricks a user into installing a malicious application which has the system privilege of the Android system and sends a specific parameter to the driver of the smart phone, causing a system crash or privilege escalation.

The eSpace Meeting ActiveX control (eSpaceStatusCtrl.dll) in Huawei eSpace Desktop before V200R001C03 allows local users to cause a denial of service (memory overflow) via unspecified vectors.

Integer overflow in the graphics drivers in Huawei Mate S smartphones with software CRR-TL00 before CRR-TL00C01B160SP01, CRR-UL00 before CRR-UL00C00B160, and CRR-CL00 before CRR-CL00C92B161 allows attackers to cause a denial of service (system crash) or gain privileges via a crafted application, which triggers a heap-based buffer overflow.

Mdapt Driver of Huawei MediaPad M3 BTV-W09C128B353CUSTC128D001; Mate 9 Pro versions earlier than 8.0.0.356(C00); P10 Plus versions earlier than 8.0.0.357(C00) has a buffer overflow vulnerability. The driver does not sufficiently validate the input, an attacker could trick the user to install a malicious application which would send crafted parameters to the driver. Successful exploit could cause a denial of service condition.

Stack-based buffer overflow on Huawei AR 150, 200, 1200, 2200, and 3200 routers, when SNMPv3 debugging is enabled, allows remote attackers to execute arbitrary code via malformed SNMPv3 requests.

SIP module in Huawei DP300 V500R002C00; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC400; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; RP200 V500R002C00SPC200; V600R006C00; V600R006C00SPC200; RSE6500 V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC300T; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC700; V500R002C00T; TE30 V100R001C10; V100R001C10SPC100; V100R001C10SPC200B010; V100R001C10SPC300; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700B010; V100R001C10SPC800; V500R002C00SPC200; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; TE40 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; TE50 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; TE60 V100R001C01SPC100; V100R001C01SPC107TB010; V100R001C10; V100R001C10SPC300; V100R001C10SPC400; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700; V100R001C10SPC800; V100R001C10SPC900; V500R002C00; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; V500R002C00SPCb00; V500R002C00SPCd00; V600R006C00; V600R006C00SPC100; V600R006C00SPC200; V600R006C00SPC300; TP3106 V100R002C00; V100R002C00SPC200; V100R002C00SPC400; V100R002C00SPC600; V100R002C00SPC700; V100R002C00SPC800; TP3206 V100R002C00; V100R002C00SPC200; V100R002C00SPC400; V100R002C00SPC600; V100R002C00SPC700; V100R002C10; ViewPoint 9030 V100R011C02SPC100; V100R011C03B012SP15; V100R011C03B012SP16; V100R011C03B015SP03; V100R011C03LGWL01SPC100; V100R011C03SPC100; V100R011C03SPC200; V100R011C03SPC300; V100R011C03SPC400; V100R011C03SPC500; eSpace U1960 V200R003C30SPC200; eSpace U1981 V100R001C20SPC700; V200R003C20SPCa00 has an overflow vulnerability that attacker can exploit by sending a specially crafted SIP message leading to a process reboot at random.

There is a vulnerability with buffer access with incorrect length value in some Huawei Smartphone.Unauthorized users may trigger code execution when a buffer overflow occurs.

Huawei CloudEngine 5800 with software before V200R001C00SPC700, CloudEngine 6800 with software before V200R001C00SPC700, CloudEngine 7800 with software before V200R001C00SPC700, CloudEngine 8800 with software before V200R001C00SPC700, CloudEngine 12800 with software before V200R001C00SPC700 could allow the attacker to exploit a buffer overflow vulnerability by sending crafted packets to the affected system to cause a main control board reboot.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Losant Arduino MQTT Client prior to V2.7. User interaction is not required to exploit this vulnerability. The specific flaw exists within the parsing of MQTT PUBLISH packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-6436.

Buffer overflow in dhd_bus_flow_ring_flush_response in drivers/net/wireless/bcmdhd4358/dhd_pcie.c in the bcmdhd4358 Wi-Fi driver on the Samsung Galaxy S6 allow an attacker (who has obtained code execution on the Wi-Fi chip) to cause the device driver to perform invalid memory accesses. The Samsung ID is SVE-2018-11785.

DeltaV Versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, and R5 is vulnerable to a buffer overflow exploit through an open communication port to allow arbitrary code execution.

Out-of-bounds array access in dhd_rx_frame in drivers/net/wireless/bcmdhd4358/dhd_linux.c in the bcmdhd4358 Wi-Fi driver on the Samsung Galaxy S6 SM-G920F G920FXXU5EQH7 allows an attacker (who has obtained code execution on the Wi-Fi chip) to cause invalid accesses to operating system memory due to improper validation of the network interface index provided by the Wi-Fi chip's firmware.

Buffer overflow in PTP (Picture Transfer Protocol) of EOS series digital cameras (EOS-1D X firmware version 2.1.0 and earlier, EOS-1D X MKII firmware version 1.1.6 and earlier, EOS-1D C firmware version 1.4.1 and earlier, EOS 5D MARK III firmware version 1.3.5 and earlier, EOS 5D MARK IV firmware version 1.2.0 and earlier, EOS 5DS firmware version 1.1.2 and earlier, EOS 5DS R firmware version 1.1.2 and earlier, EOS 6D firmware version 1.1.8 and earlier, EOS 6D MARK II firmware version 1.0.4 and earlier, EOS 7D MARK II firmware version 1.1.2 and earlier, EOS 70 D firmware version 1.1.2 and earlier, EOS 80 D firmware version 1.0.2 and earlier, EOS KISS X7I / EOS D REBEL T5I / EOS 700D firmware version 1.1.5 and earlier, EOS KISS X8I / EOS D REBEL T6I / EOS 750D firmware version 1.0.0 and earlier, EOS KISS X9I / EOS D REBEL T7I / EOS 800D firmware version 1.0.1 and earlier, EOS KISS X7 / EOS D REBEL SL1 / EOS 100D firmware version 1.0.1 and earlier, EOS KISS X9 / EOS D REBEL SL2 / EOS 200D firmware version 1.0.1 and earlier, EOS KISS X10 / EOS D REBEL SL3 / EOS 200D / EOS 250D firmware version 1.0.1 and earlier, EOS 8000D / EOS D REBEL T6S / EOS 760D firmware version 1.0.0 and earlier, EOS 9000D / EOS 77D firmware version 1.0.2 and earlier, EOS KISS X70 / EOS D REBEL T5 / EOS 1200D firmware version 1.0.2 and earlier, EOS D REBEL T5 RE / EOS 1200D MG / EOS HI firmware version 1.0.2 and earlier, EOS KISS X80 / EOS D REBEL T6 / EOS 1300D firmware version 1.1.0 and earlier, EOS KISS X90 / EOS D REBEL T7 / EOS 1500D / EOS 2000D firmware version 1.0.0 and earlier, EOS D REBEL T100 / EOS 3000D / EOS 4000D firmware version 1.0.0 and earlier, EOS R firmware version 1.3.0 and earlier, EOS RP firmware version 1.2.0 and earlier, EOS RP GOLD firmware version 1.2.0 and earlier, EOS M2 firmware version 1.0.3 and earlier, EOS M3 firmware version 1.2.0 and earlier, EOS M5 firmware version 1.0.1 and earlier, EOS M6 firmware version 1.0.1 and earlier, EOS M6(China) firmware version 5.0.0 and earlier, EOS M10 firmware version 1.1.0 and earlier, EOS M100 firmware version 1.0.0 and earlier, EOS KISS M / EOS M50 firmware version 1.0.2 and earlier) and PowerShot SX740 HS firmware version 1.0.1 and earlier, PowerShot SX70 HS firmware version 1.1.0 and earlier, and PowerShot G5Xmark II firmware version 1.0.1 and earlier allows an attacker on the same network segment to trigger the affected product being unresponsive or to execute arbitrary code on the affected product via SendObjectInfo command.

Lack of check of input size can make device memory get corrupted because of buffer overflow in snapdragon automobile, snapdragon mobile and snapdragon wear in versions MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8909W, MSM8996AU, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 615/16/SD 415, SD 625, SD 636, SD 650/52, SD 712 / SD 710 / SD 670, SD 810, SD 820, SD 820A, SD 835, SD 845 / SD 850, SDA660, SDM439, SDM630, SDM660, SDX20, Snapdragon_High_Med_2016, SXR1130

A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167.

A vulnerability in the Internet Group Management Protocol (IGMP) Snooping feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the IGMP Snooping subsystem. An attacker could exploit this vulnerability by sending crafted IGMP packets to an affected system. An exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCuv79620, CSCvg71263.

An Improper Restriction of Operations within the Bounds of a Memory Buffer issue was discovered in the Continental AG Infineon S-Gold 2 (PMB 8876) chipset on BMW several models produced between 2009-2010, Ford a limited number of P-HEV vehicles, Infiniti 2013 JX35, Infiniti 2014-2016 QX60, Infiniti 2014-2016 QX60 Hybrid, Infiniti 2014-2015 QX50, Infiniti 2014-2015 QX50 Hybrid, Infiniti 2013 M37/M56, Infiniti 2014-2016 Q70, Infiniti 2014-2016 Q70L, Infiniti 2015-2016 Q70 Hybrid, Infiniti 2013 QX56, Infiniti 2014-2016 QX 80, and Nissan 2011-2015 Leaf. A vulnerability in the temporary mobile subscriber identity (TMSI) may allow an attacker to access and control memory. This may allow remote code execution on the baseband radio processor of the TCU.

Buffer overflow in TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Improper input validation for GATT data packet received in Bluetooth Controller function can lead to possible memory corruption in Snapdragon Mobile in version QCA9379, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 820, SD 835, SD 845, SD 850, SDM630, SDM636, SDM660, SDM710, Snapdragon_High_Med_2016.

Stack-based buffer overflow in lib/snmpagent.c in bsnmpd, as used in FreeBSD 8.3 through 10.0, allows remote attackers to cause a denial of service (daemon crash) and possibly execute arbitrary code via a crafted GETBULK PDU request.

A heap overflow vulnerability was found in bluez in versions prior to 5.63. An attacker with local network access could pass specially crafted files causing an application to halt or crash, leading to a denial of service.

Buffer overflow in the gif_read_lzw function in CUPS 1.3.6 allows remote attackers to have an unknown impact via a GIF file with a large code_size value, a similar issue to CVE-2006-4484.

A vulnerability was found in D-Link DI-8100 up to 20250523. It has been classified as critical. Affected is the function httpd_get_parm of the file /login.cgi of the component jhttpd. The manipulation of the argument notify leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used.

In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while processing a 802.11 management frame, a buffer overflow may potentially occur.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom binary called mp4ts under the /var/www/video folder. It seems that this binary dumps the HTTP VERB in the system logs. As a part of doing that it retrieves the HTTP VERB sent by the user and uses a vulnerable sprintf function at address 0x0000C3D4 in the function sub_C210 to copy the value into a string and then into a log file. Since there is no bounds check being performed on the environment variable at address 0x0000C360 this results in a stack overflow and overwrites the PC register allowing an attacker to execute buffer overflow or even a command injection attack.

Buffer overflow in the dissect_tlv function in epan/dissectors/packet-ldp.c in the LDP dissector in Wireshark 1.8.x before 1.8.3 allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a malformed packet.

Buffer overflow in Corega CG-WGR1200 firmware 2.20 and earlier allows an attacker to execute arbitrary code via unspecified vectors.

Buffer overflow in the channelised_fill_sdh_g707_format function in epan/dissectors/packet-erf.c in the ERF dissector in Wireshark 1.8.x before 1.8.2 allows remote attackers to execute arbitrary code via a large speed (aka rate) value.

Buffer overflow in Corega CG-WGR1200 firmware 2.20 and earlier allows an attacker to execute arbitrary commands via unspecified vectors.

Buffer overflow in HOME SPOT CUBE2 firmware V101 and earlier allows an attacker to execute arbitrary code via WebUI.