A Missing Release of Memory after Effective Lifetime vulnerability in the routing process daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a malformed BGP Path attribute update which allocates memory used to log the bad path attribute. This memory is not properly freed in all circumstances, leading to a Denial of Service (DoS). Consumed memory can be freed by manually restarting Routing Protocol Daemon (rpd). Memory utilization could be monitored by:  user@host> show system memory or show system monitor memory status This issue affects: Junos OS:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S8, * from 22.2 before 22.2R3-S4,  * from 22.3 before 22.3R3-S3,  * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * from 21.4 before 21.4R3-S8-EVO, * from 22.2 before 22.2R3-S4-EVO, * from 22.3 before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-S3-EVO, * from 23.2 before 23.2R2-S1-EVO, * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

A Missing Release of Resource after Effective Lifetime vulnerability the xinetd process, responsible for spawning SSH daemon (sshd) instances, of Juniper Networks Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial of Service (DoS) by blocking SSH access for legitimate users. Continued receipt of these connections will create a sustained Denial of Service (DoS) condition. The issue is triggered when a high rate of concurrent SSH requests are received and terminated in a specific way, causing xinetd to crash, and leaving defunct sshd processes. Successful exploitation of this vulnerability blocks both SSH access as well as services which rely upon SSH, such as SFTP, and Netconf over SSH. Once the system is in this state, legitimate users will be unable to SSH to the device until service is manually restored.  See WORKAROUND section below. Administrators can monitor an increase in defunct sshd processes by utilizing the CLI command:   > show system processes | match sshd   root   25219 30901 0 Jul16 ?       00:00:00 [sshd] <defunct> This issue affects Juniper Networks Junos OS Evolved: * All versions prior to 21.4R3-S7-EVO * 22.3-EVO versions prior to 22.3R2-S2-EVO, 22.3R3-S2-EVO; * 22.4-EVO versions prior to 22.4R3-EVO; * 23.2-EVO versions prior to 23.2R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved 22.1-EVO nor 22.2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage. This issue affects Junos OS: 21.2 releases from 21.2R3-S5 before 21.2R3-S6. This issue does not affect earlier or later releases.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis management daemon (chassisd) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an attempt is made to access specific sensors on platforms not supporting these sensors, either via GRPC or netconf, chassisd will crash and restart leading to a restart of all FPCs and thereby a complete outage. This issue affects Junos OS: * 21.4 versions from 21.4R3 before 21.4R3-S5, * 22.1 versions from 22.1R3 before 22.1R3-S4, * 22.2 versions from 22.2R2 before 22.2R3, * 22.3 versions from 22.3R1 before 22.3R2-S2, 22.3R3, * 22.4 versions from 22.4R1 before 22.4R2. This issue does not affect Junos OS versions earlier than 21.4.

A Use of Externally-Controlled Format String vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If DNS Domain Generation Algorithm (DGA) detection or tunnel detection, and DNS-filtering traceoptions are configured, and specific valid transit DNS traffic is received this causes a PFE crash and restart, leading to a Denial of Service. This issue affects Junos OS: * All versions before 21.4R3-S6, * 22.2 versions before 22.2R3-S3, * 22.3 versions before 22.3R3-S3, * 22.4 versions before 22.4R3, * 23.2 versions before 23.2R2.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause the RPD process to crash leading to a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, RPD crashes and restarts. Continuous receipt of the malformed BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. This issue affects: Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. Juniper Networks Junos OS Evolved: * All versions earlier than 21.2R3-S7; * 21.3-EVO versions earlier than 21.3R3-S5; * 21.4-EVO versions earlier than 21.4R3-S8; * 22.1-EVO versions earlier than 22.1R3-S4; * 22.2-EVO versions earlier than 22.2R3-S3; * 22.3-EVO versions earlier than 22.3R3-S2; * 22.4-EVO versions earlier than 22.4R3; * 23.2-EVO versions earlier than 23.2R2.

An Improper Validation of Syntactic Correctness of Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series with MPC10/11 or LC9600, MX304, and Junos OS Evolved on ACX Series and PTX Series allows an unauthenticated, network based attacker to cause a Denial-of-Service (DoS). This issue can occur in two scenarios: 1. If a device, which is configured with SFLOW and ECMP, receives specific valid transit traffic, which is subject to sampling, the packetio process crashes, which in turn leads to an evo-aftman crash and causes the FPC to stop working until it is restarted. (This scenario is only applicable to PTX but not to ACX or MX.) 2. If a device receives a malformed CFM packet on an interface configured with CFM, the packetio process crashes, which in turn leads to an evo-aftman crash and causes the FPC to stop working until it is restarted. Please note that the CVSS score is for the formally more severe issue 1. The CVSS score for scenario 2. is: 6.5 (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) This issue affects Junos OS: * All versions before 21.2R3-S4, * 21.4 versions before 21.4R2, * 22.2 versions before 22.2R3-S2;  Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * 21.4 versions before 21.4R2-EVO.

An Improper Handling of Values vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows a network-based, unauthenticated attacker to cause a Denial-of-Service (DoS). If a value is configured for DDoS bandwidth or burst parameters for any protocol in a queue, all protocols which share the same queue will have their bandwidth or burst value changed to the new value. If, for example, OSPF was configured with a certain bandwidth value, ISIS would also be limited to this value. So inadvertently either the control plane is open for a high level of specific traffic which was supposed to be limited to a lower value, or the limit for a certain protocol is so low that chances to succeed with a volumetric DoS attack are significantly increased.  This issue affects Junos OS Evolved on ACX 7000 Series: * All versions before 21.4R3-S7-EVO, * 22.1 versions before 22.1R3-S6-EVO,  * 22.2 versions before 22.2R3-S3-EVO, * 22.3 versions before 22.3R3-S3-EVO,  * 22.4 versions before 22.4R3-S2-EVO, * 23.2 versions before 23.2R2-EVO, * 23.4 versions before 23.4R1-S1-EVO, 23.4R2-EVO.

An Uncontrolled Resource Consumption vulnerability in the H.323 ALG (Application Layer Gateway) of  Juniper Networks Junos OS on SRX Series and MX Series with SPC3 and MS-MPC/MIC, allows an unauthenticated network-based attacker to send specific packets causing traffic loss leading to Denial of Service (DoS).  Continued receipt and processing of these specific packets will sustain the Denial of Service condition. The memory usage can be monitored using the below command.   user@host> show usp memory segment sha data objcache jsf  This issue affects SRX Series and MX Series with SPC3 and MS-MPC/MIC:  *  20.4 before 20.4R3-S10,  *  21.2 before 21.2R3-S6,  *  21.3 before 21.3R3-S5,  *  21.4 before 21.4R3-S6,  *  22.1 before 22.1R3-S4,  *  22.2 before 22.2R3-S2,  *  22.3 before 22.3R3-S1,  *  22.4 before 22.4R3,  *  23.2 before 23.2R2.

An Uncontrolled Resource Consumption vulnerability in the aftmand process of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to consume memory resources, resulting in a Denial of Service (DoS) condition. The processes do not recover on their own and must be manually restarted. This issue affects both IPv4 and IPv6.  Changes in memory usage can be monitored using the following CLI command: user@device> show system memory node <fpc slot> | grep evo-aftmann This issue affects Junos OS Evolved:  * All versions before 21.2R3-S8-EVO,  * 21.3 versions before 21.3R3-S5-EVO,  * 21.4 versions before 21.4R3-S5-EVO,  * 22.1 versions before 22.1R3-S4-EVO,  * 22.2 versions before 22.2R3-S4-EVO, * 22.3 versions before 22.3R3-S3-EVO, * 22.4 versions before 22.4R2-S2-EVO, 22.4R3-EVO,  * 23.2 versions before 23.2R1-S1-EVO, 23.2R2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability combined with Improper Handling of Exceptional Conditions in Juniper Networks Junos OS on QFX Series and PTX Series allows an unauthenticated network based attacker to cause increased FPC CPU utilization by sending specific IP packets which are being VXLAN encapsulated leading to a partial Denial of Service (DoS). Continued receipted of these specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX Series: All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. Juniper Networks Junos OS on PTX Series: All versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.

An Improper Check for Unusual or Exceptional Conditions in packet processing on the MS-MPC/MS-MIC utilized by Juniper Networks Junos OS allows a malicious attacker to send a specific packet, triggering the MS-MPC/MS-MIC to reset, causing a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects specific versions of Juniper Networks Junos OS on MX Series: 17.3R3-S11; 17.4R2-S13; 17.4R3 prior to 17.4R3-S5; 18.1R3-S12; 18.2R2-S8, 18.2R3-S7, 18.2R3-S8; 18.3R3-S4; 18.4R3-S7; 19.1R3-S4, 19.1R3-S5; 19.2R1-S6; 19.3R3-S2; 19.4R2-S4, 19.4R2-S5; 19.4R3-S2; 20.1R2-S1; 20.2R2-S2, 20.2R2-S3, 20.2R3; 20.3R2, 20.3R2-S1; 20.4R1, 20.4R1-S1, 20.4R2; 21.1R1; This issue does not affect any version of Juniper Networks Junos OS prior to 15.1X49-D240;

An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS).  In a scenario where BGP Monitoring Protocol (BMP) is configured with rib-in pre-policy monitoring, receiving a BGP update with a specifically malformed AS PATH attribute over an established BGP session, can cause an RPD crash and restart. This issue affects: Junos OS:  * All versions before 21.2R3-S8, * 21.4 versions before 21.4R3-S8, * 22.2 versions before 22.2R3-S4, * 22.3 versions before 22.3R3-S3, * 22.4 versions before 22.4R3-S2, * 23.2 versions before 23.2R2-S1, * 23.4 versions before 23.4R1-S2, 23.4R2; Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * 21.4 versions before 21.4R3-S8-EVO, * 22.2 versions before 22.2R3-S4-EVO, * 22.3 versions before 22.3R3-S3-EVO, * 22.4 versions before 22.4R3-S2-EVO, * 23.2 versions before 23.2R2-S1-EVO, * 23.4 versions before 23.4R1-S2-EVO, 23.4R2-EVO.

On Juniper Networks Junos OS and Junos OS Evolved devices processing a specially crafted BGP UPDATE or KEEPALIVE message can lead to a routing process daemon (RPD) crash and restart, causing a Denial of Service (DoS). Continued receipt and processing of this message will create a sustained Denial of Service (DoS) condition. This issue affects both IBGP and EBGP deployments over IPv4 or IPv6. This issue affects: Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R1-S4, 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S1, 20.3R2. Juniper Networks Junos OS Evolved: 20.3 versions prior to 20.3R2-EVO.

Unknown vulnerability in ScreenOS in Juniper Networks NetScreen firewall 3.x through 5.x allows remote attackers to cause a denial of service (device reboot or hang) via a crafted SSH v1 packet.

An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). In specific cases the state of TCP sessions that are terminated is not cleared, which over time leads to an exhaustion of resources, preventing new connections to the control plane from being established. A continuously increasing number of connections shown by: user@host > show system connections is indicative of the problem. To recover the respective RE needs to be restarted manually. This issue only affects IPv4 but does not affect IPv6. This issue only affects TCP sessions established in-band (over an interface on an FPC) but not out-of-band (over the management ethernet port on the routing-engine). This issue affects Junos OS Evolved:  * All versions before 21.4R3-S9-EVO, * 22.2 versions before 22.2R3-S4-EVO, * 22.4 version before 22.4R3-S3-EVO, * 23.2 versions before 23.2R2-S1-EVO, * 23.4 versions before 23.4R2-EVO.

TCP, when using a large Window Size, makes it easier for remote attackers to guess sequence numbers and cause a denial of service (connection loss) to persistent TCP connections by repeatedly injecting a TCP RST packet, especially in protocols that use long-lived connections, such as BGP.

Memory leak in Juniper JUNOS Packet Forwarding Engine (PFE) allows remote attackers to cause a denial of service (memory exhaustion and device reboot) via certain IPv6 packets.

Juniper JUNOS 5.x through JUNOS 7.x allows remote attackers to cause a denial of service (routing disabled) via a large number of MPLS packets, which are not filtered or verified before being sent to the Routing Engine, which reduces the speed at which other packets are processed.

A Stack-based Buffer Overflow vulnerability in the Routing Protocol Daemon (RPD) component of Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause an rpd crash, leading to Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, when EVPN is configured, and a specific EVPN type-5 route is received via BGP, rpd crashes and restarts. Continuous receipt of this specific route will lead to a sustained Denial of Service (DoS) condition. This issue affects: Junos OS: * all versions before 21.2R3-S7, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3-S4, * from 22.2 before 22.2R3-S2, * from 22.3 before 22.3R3-S1, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2. Junos OS Evolved: * all versions before 21.4R3-S5-EVO, * from 22.1-EVO before 22.1R3-S4-EVO, * from 22.2-EVO before 22.2R3-S2-EVO, * from 22.3-EVO before 22.3R3-S1-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO.

A Stack-based Buffer Overflow vulnerability in Flow Processing Daemon (flowd) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS MX Series platforms with SPC3 and MS-MPC/-MIC, when URL filtering is enabled and a specific URL request is received and processed, flowd will crash and restart. Continuous reception of the specific URL request will lead to a sustained Denial of Service (DoS) condition. This issue affects: Junos OS: * all versions before 21.2R3-S6, * from 21.3 before 21.3R3-S5, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3-S3, * from 22.2 before 22.2R3-S1, * from 22.3 before 22.3R2-S2, 22.3R3, * from 22.4 before 22.4R2-S1, 22.4R3.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the the Public Key Infrastructure daemon (pkid) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause Denial of Service (DoS). The pkid is responsible for the certificate verification. Upon a failed verification, the pkid uses all CPU resources and becomes unresponsive to future verification attempts. This means that all subsequent VPN negotiations depending on certificate verification will fail. This CPU utilization of pkid can be checked using this command:   root@srx> show system processes extensive | match pkid   xxxxx  root  103  0  846M  136M  CPU1  1 569:00 100.00% pkid This issue affects: Juniper Networks Junos OS * All versions prior to 20.4R3-S10; * 21.2 versions prior to 21.2R3-S7; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S4; * 22.2 versions prior to 22.2R3-S3; * 22.3 versions prior to 22.3R3-S1; * 22.4 versions prior to 22.4R3; * 23.2 versions prior to 23.2R1-S2, 23.2R2.

An Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When a high amount of specific traffic is received on a SRX4600 device, due to an error in internal packet handling, a consistent rise in CPU memory utilization occurs. This results in packet drops in the traffic and eventually the PFE crashes. A manual reboot of the PFE will be required to restore the device to original state. This issue affects Junos OS:   * 21.2 before 21.2R3-S7, * 21.4 before 21.4R3-S6,  * 22.1 before 22.1R3-S5, * 22.2 before 22.2R3-S3, * 22.3 before 22.3R3-S2, * 22.4 before 22.4R3, * 23.2 before 23.2R1-S2, 23.2R2.

The web interface (WebUI) of NetScreen ScreenOS before 2.6.1r8, and certain 2.8.x and 3.0.x versions before 3.0.3r1, allows remote attackers to cause a denial of service (crash) via a long user name.

A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). In a remote access VPN scenario, if a "tcp-encap-profile" is configured and a sequence of specific packets is received, a flowd crash and restart will be observed. This issue affects Juniper Networks Junos OS on SRX Series: * All versions earlier than 20.4R3-S8; * 21.2 versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S3; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3.

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If a specific IPv4 UDP packet is received and sent to the Routing Engine (RE) packetio crashes and restarts which causes a momentary traffic interruption. Continued receipt of such packets will lead to a sustained DoS. This issue does not happen with IPv6 packets. This issue affects Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L: * 21.4-EVO versions earlier than 21.4R3-S6-EVO; * 22.1-EVO versions earlier than 22.1R3-S5-EVO; * 22.2-EVO versions earlier than 22.2R2-S1-EVO, 22.2R3-EVO; * 22.3-EVO versions earlier than 22.3R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions earlier than 21.4R1-EVO.

An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If a high rate of specific valid packets are processed by the routing engine (RE) this will lead to a loss of connectivity of the RE with other components of the chassis and thereby a complete and persistent system outage. Please note that a carefully designed lo0 firewall filter will block or limit these packets which should prevent this issue from occurring. The following log messages can be seen when this issue occurs: <host> kernel: nf_conntrack: nf_conntrack: table full, dropping packet This issue affects Juniper Networks Junos OS Evolved: * All versions earlier than 20.4R3-S7-EVO; * 21.2R1-EVO and later versions; * 21.4-EVO versions earlier than 21.4R3-S5-EVO; * 22.1-EVO versions earlier than 22.1R3-S2-EVO; * 22.2-EVO versions earlier than 22.2R3-EVO; * 22.3-EVO versions earlier than 22.3R2-EVO; * 22.4-EVO versions earlier than 22.4R2-EVO.

A buffer overflow vulnerability in the TCP/IP stack of Juniper Networks Junos OS allows an attacker to send specific sequences of packets to the device thereby causing a Denial of Service (DoS). By repeatedly sending these sequences of packets to the device, an attacker can sustain the Denial of Service (DoS) condition. The device will abnormally shut down as a result of these sent packets. A potential indicator of compromise will be the following message in the log files: "eventd[13955]: SYSTEM_ABNORMAL_SHUTDOWN: System abnormally shut down" These issue are only triggered by traffic destined to the device. Transit traffic will not trigger these issues. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S19; 15.1 versions prior to 15.1R7-S10; 16.1 version 16.1R1 and later versions; 16.2 version 16.2R1 and later versions; 17.1 version 17.1R1 and later versions; 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S12; 17.4 version 17.4R1 and later versions; 18.1 versions prior to 18.1R3-S13; 18.2 version 18.2R1 and later versions; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2.

A vulnerability in the processing of traffic matching a firewall filter containing a syslog action in Juniper Networks Junos OS on MX Series with MPC10/MPC11 cards installed, PTX10003 and PTX10008 Series devices, will cause the line card to crash and restart, creating a Denial of Service (DoS). Continued receipt and processing of packets matching the firewall filter can create a sustained Denial of Service (DoS) condition. When traffic hits the firewall filter, configured on lo0 or any physical interface on the line card, containing a term with a syslog action (e.g. 'term <name> then syslog'), the affected line card will crash and restart, impacting traffic processing through the ports of the line card. This issue only affects MX Series routers with MPC10 or MPC11 line cards, and PTX10003 or PTX10008 Series packet transport routers. No other platforms or models of line cards are affected by this issue. Note: This issue has also been identified and described in technical service bulletin TSB17931 (login required). This issue affects: Juniper Networks Junos OS on MX Series: 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2. Juniper Networks Junos OS Evolved on PTX10003, PTX10008: All versions prior to 20.4R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.

A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Captive Portal allows an unauthenticated attacker to cause an extended Denial of Service (DoS) for these services by sending a high number of specific requests. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17 on EX Series; 12.3X48 versions prior to 12.3X48-D105 on SRX Series; 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230 on SRX Series; 16.1 versions prior to 16.1R7-S8; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.

An Improper Handling of Exceptional Conditions vulnerability in AS PATH processing of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a BGP update message with an AS PATH containing a large number of 4-byte ASes, leading to a Denial of Service (DoS). Continued receipt and processing of these BGP updates will create a sustained Denial of Service (DoS) condition. This issue is hit when the router has Non-Stop Routing (NSR) enabled, has a non-4-byte-AS capable BGP neighbor, receives a BGP update message with a prefix that includes a long AS PATH containing large number of 4-byte ASes, and has to advertise the prefix towards the non-4-byte-AS capable BGP neighbor. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. This issue affects: Juniper Networks Junos OS: * All versions prior to 20.4R3-S8; * 21.1 versions 21.1R1 and later; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S4; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R2-S2, 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1, 22.4R3. Juniper Networks Junos OS Evolved * All versions prior to 20.4R3-S8-EVO; * 21.1 versions 21.1R1-EVO and later; * 21.2 versions prior to 21.2R3-S6-EVO; * 21.3 versions prior to 21.3R3-S5-EVO; * 21.4 versions prior to 21.4R3-S5-EVO; * 22.1 versions prior to 22.1R3-S4-EVO; * 22.2 versions prior to 22.2R3-S2-EVO; * 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; * 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO.

Netscreen running ScreenOS 4.0.0r6 and earlier allows remote attackers to cause a denial of service via a malformed SSH packet to the Secure Command Shell (SCS) management interface, as demonstrated via certain CRC32 exploits, a different vulnerability than CVE-2001-0144.

An Allocation of Resources Without Limits or Throttling vulnerability in Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS QFX5000 Series and EX4000 Series platforms, when a high number of VLANs are configured, a specific DHCP packet will cause PFE hogging which will lead to dropping of socket connections. This issue affects: Juniper Networks Junos OS on QFX5000 Series and EX4000 Series * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S1; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1

An improper restriction of operations within the bounds of a memory buffer vulnerability in Juniper Networks Junos OS J-Web on SRX Series devices allows an attacker to cause Denial of Service (DoS) by sending certain crafted HTTP packets. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. When this issue occurs, web-management, NTP daemon (ntpd) and Layer 2 Control Protocol process (L2CPD) daemons might crash. This issue affects Juniper Networks Junos OS on SRX Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2;

In segment routing traffic engineering (SRTE) environments where the BGP Monitoring Protocol (BMP) feature is enable, a vulnerability in the Routing Protocol Daemon (RPD) process of Juniper Networks Junos OS allows an attacker to send a specific crafted BGP update message causing the RPD service to core, creating a Denial of Service (DoS) Condition. Continued receipt and processing of this update message will create a sustained Denial of Service (DoS) condition. This issue affects IPv4 and IPv6 environments. This issue affects: Juniper Networks Junos OS 17.4 versions 17.4R1 and above prior to 17.4R2-S6, 17.4R3; 18.1 versions prior to 18.1R3-S7; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2, This issue does not affect Junos OS releases prior to 17.4R1. This issue affects: Juniper Networks Junos OS Evolved 19.2-EVO versions prior to 19.2R2-EVO.

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to send a specific packet causing the packet forwarding engine (PFE) to crash and restart, resulting in a Denial of Service (DoS). By continuously sending these specific packets, an attacker can repeatedly disable the PFE causing a sustained Denial of Service (DoS). This issue only affects Juniper Networks NFX Series, SRX Series platforms when SSL Proxy is configured. This issue affects Juniper Networks Junos OS on NFX Series and SRX Series: 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S1; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS versions on NFX Series and SRX Series prior to 18.3R1.

An improper interpretation conflict of certain data between certain software components within the Juniper Networks Junos OS devices does not allow certain traffic to pass through the device upon receipt from an ingress interface filtering certain specific types of traffic which is then being redirected to an egress interface on a different VLAN. This causes a Denial of Service (DoS) to those clients sending these particular types of traffic. Such traffic being sent by a client may appear genuine, but is non-standard in nature and should be considered as potentially malicious, and can be targeted to the device, or destined through it for the issue to occur. This issues affects IPv4 and IPv6 traffic. An indicator of compromise may be found by checking log files. You may find that traffic on the input interface has 100% of traffic flowing into the device, yet the egress interface shows 0 pps leaving the device. For example: [show interfaces "interface" statistics detail] Output between two interfaces would reveal something similar to: Ingress, first interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/0 Up 9999999999 (9999) 1 (0) -------------------- Egress, second interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 0 (0) 9999999999 (0) -------------------- Dropped packets will not show up in DDoS monitoring/protection counters as issue is not caused by anti-DDoS protection mechanisms. This issue affects: Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S7 on NFX250, QFX5K Series, EX4600; 17.4 versions prior to 17.4R2-S11, 17.4R3-S3 on NFX250, QFX5K Series, EX4600; 18.1 versions prior to 18.1R3-S9 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4600; 18.2 versions prior to 18.2R3-S3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600; 18.3 versions prior to 18.3R3-S1 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.2 versions prior to 19.2R1-S5, 19.2R2 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.3 versions prior to 19.3R2-S3, 19.3R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.4 versions prior to 19.4R1-S2, 19.4R2 on NFX250, NFX350, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series. This issue does not affect Junos OS releases prior to 17.2R2.

Due to an improper Initialization vulnerability on Juniper Networks Junos OS QFX5100-96S devices with QFX 5e Series image installed, ddos-protection configuration changes will not take effect beyond the default DDoS (Distributed Denial of Service) settings when configured from the CLI. The DDoS protection (jddosd) daemon allows the device to continue to function while protecting the packet forwarding engine (PFE) during the DDoS attack. When this issue occurs, the default DDoS settings within the PFE apply, as CPU bound packets will be throttled and dropped in the PFE when the limits are exceeded. To check if the device has this issue, the administrator can execute the following command to monitor the status of DDoS protection: user@device> show ddos-protection protocols error: the ddos-protection subsystem is not running This issue affects only QFX5100-96S devices. No other products or platforms are affected by this issue. This issue affects: Juniper Networks Junos OS on QFX5100-96S: 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R3, 19.1R3-S4; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2;

On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.

When Express Path (formerly known as service offloading) is configured on Juniper Networks SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800 in high availability cluster configuration mode, certain multicast packets might cause the flowd process to crash, halting or interrupting traffic from flowing through the device and triggering RG1+ (data-plane) fail-over to the secondary node. Repeated crashes of the flowd process may constitute an extended denial of service condition. This service is not enabled by default and is only supported in high-end SRX platforms. Affected releases are Juniper Networks Junos OS 12.3X48 prior to 12.3X48-D45, 15.1X49 prior to 15.1X49-D80 on SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800.

A denial of service vulnerability in telnetd service on Juniper Networks Junos OS allows remote unauthenticated attackers to cause a denial of service. Affected Junos OS releases are: 12.1X46 prior to 12.1X46-D71; 12.3X48 prior to 12.3X48-D50; 14.1 prior to 14.1R8-S5, 14.1R9; 14.1X53 prior to 14.1X53-D50; 14.2 prior to 14.2R7-S9, 14.2R8; 15.1 prior to 15.1F2-S16, 15.1F5-S7, 15.1F6-S6, 15.1R5-S2, 15.1R6; 15.1X49 prior to 15.1X49-D90; 15.1X53 prior to 15.1X53-D47; 16.1 prior to 16.1R4-S1, 16.1R5; 16.2 prior to 16.2R1-S3, 16.2R2;

Any Juniper Networks SRX series device with one or more ALGs enabled may experience a flowd crash when traffic is processed by the Sun/MS-RPC ALGs. This vulnerability in the Sun/MS-RPC ALG services component of Junos OS allows an attacker to cause a repeated denial of service against the target. Repeated traffic in a cluster may cause repeated flip-flop failure operations or full failure to the flowd daemon halting traffic on all nodes. Only IPv6 traffic is affected by this issue. IPv4 traffic is unaffected. This issues is not seen with to-host traffic. This issue has no relation with HA services themselves, only the ALG service. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D55 on SRX; 12.1X47 prior to 12.1X47-D45 on SRX; 12.3X48 prior to 12.3X48-D32, 12.3X48-D35 on SRX; 15.1X49 prior to 15.1X49-D60 on SRX.

Juniper Networks Junos OS 16.1R1, and services releases based off of 16.1R1, are vulnerable to the receipt of a crafted BGP Protocol Data Unit (PDU) sent directly to the router, which can cause the RPD routing process to crash and restart. Unlike BGP UPDATEs, which are transitive in nature, this issue can only be triggered by a packet sent directly to the IP address of the router. Repeated crashes of the rpd daemon can result in an extended denial of service condition. This issue only affects devices running Junos OS 16.1R1 and services releases based off of 16.1R1 (e.g. 16.1R1-S1, 16.1R1-S2, 16.1R1-S3). No prior versions of Junos OS are affected by this vulnerability, and this issue was resolved in Junos OS 16.2 prior to 16.2R1. No other Juniper Networks products or platforms are affected by this issue. This issue was found during internal product security testing.

Firewalls from multiple vendors empty state tables more slowly than they are filled, which allows remote attackers to flood state tables with packet flooding attacks such as (1) TCP SYN flood, (2) UDP flood, or (3) Crikey CRC Flood, which causes the firewall to refuse any new connections.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series and NFX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an affected device receives specific valid traffic destined to the device, it will cause the PFE to crash and restart. Continued receipt and processing of this traffic will create a sustained DoS condition. This issue affects Junos OS on SRX Series: * 21.4 versions before 21.4R3-S7.9, * 22.1 versions before 22.1R3-S5.3, * 22.2 versions before 22.2R3-S4.11, * 22.3 versions before 22.3R3, * 22.4 versions before 22.4R3. This issue affects Junos OS on NFX Series: * 21.4 versions before 21.4R3-S8, * 22.1 versions after 22.1R1, * 22.2 versions before 22.2R3-S5, * 22.3 versions before 22.3R3, * 22.4 versions before 22.4R3. Junos OS versions prior to 21.4R1 are not affected by this issue.