A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795.

A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803.

A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164.

Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823.

A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002.

A vulnerability in the Session Initiation Protocol (SIP) ingress packet processing of Cisco Unified IP Phone software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms in the software. An attacker could exploit this vulnerability by sending high volumes of SIP INVITE traffic to the targeted device. Successful exploitation could allow the attacker to cause a disruption of services on the targeted IP phone. Cisco Bug IDs: CSCve10064, CSCve14617, CSCve14638, CSCve14683, CSCve20812, CSCve20926, CSCve20945.

A vulnerability in the implementation of Session Initiation Protocol (SIP) processing in Cisco Small Business SPA514G IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending crafted SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. Cisco has not released software updates that address this vulnerability. This vulnerability affects Cisco Small Business SPA514G IP Phones that are running firmware release 7.6.2SR2 or earlier.

A vulnerability in the Switch Integrated Security Features of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an interface queue wedge. The vulnerability is due to incorrect handling of crafted IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv6 packets through the device. An exploit could allow the attacker to cause an interface queue wedge. This vulnerability affects the Cisco cBR-8 Converged Broadband Router, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco Cloud Services Router 1000V Series when configured with IPv6. In the field and internal testing, this vulnerability was only observed or reproduced on the Cisco cBR-8 Converged Broadband Router. The Cisco ASR 1000 Series Aggregation Services Routers and Cisco Cloud Services Router 1000V Series contain the same code logic, so affected trains have had the code fix applied; however, on these two products, the vulnerability has not been observed in the field or successfully reproduced internally. Cisco Bug IDs: CSCvd75185.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to obtain sensitive information from memory or cause a denial of service (DoS) condition on the affected product. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overread condition, which could allow the attacker to obtain sensitive information from memory or cause a DoS condition on the affected product. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69957, CSCve02435, CSCve04859, CSCve41536, CSCve41538, CSCve41559.

Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456.

A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition.

A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of SIP packets in transit while NAT is performed on an affected device. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted SIP packets via UDP port 5060 through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the TCP throttling process of Cisco Prime Network could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection for TCP listening ports. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP SYN packets to the local IP address of the targeted application. A successful exploit could allow the attacker to cause the device to consume a high amount of memory and become slow, or to stop accepting new TCP connections to the application. Cisco Bug IDs: CSCvg48152.

A vulnerability in the TCP stack of Cisco SocialMiner could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition in the notification system. The vulnerability is due to faulty handling of new TCP connections to the affected application. An attacker could exploit this vulnerability by sending a malicious TCP packet to the vulnerable service. An exploit could allow the attacker to create a DoS condition by interrupting certain phone services. A manual restart of the service may be required to restore full functionalities. Cisco Bug IDs: CSCvh48368.

A vulnerability in SMART-SSL Accelerator functionality for Cisco Wide Area Application Services (WAAS) 6.2.1, 6.2.1a, and 6.2.3a could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition where the WAN optimization could stop functioning while the process restarts. The vulnerability is due to a Secure Sockets Layer/Transport Layer Security (SSL/TLS) alert being incorrectly handled when in a specific SSL/TLS connection state. An attacker could exploit this vulnerability by establishing a SMART-SSL connection through the targeted device. The attacker would then send a crafted stream of SSL/TLS traffic. An exploit could allow the attacker to cause a DoS condition where WAN optimization could stop processing traffic for a short period of time. Cisco Bug IDs: CSCvb71133.

A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE 3.16 could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a race condition that could occur when the affected software processes an SNMP read request that contains certain criteria for a specific object ID (OID) and an active crypto session is disconnected on an affected device. An attacker who can authenticate to an affected device could trigger this vulnerability by issuing an SNMP request for a specific OID on the device. A successful exploit will cause the device to restart due to an attempt to access an invalid memory region. The attacker does not control how or when crypto sessions are disconnected on the device. Cisco Bug IDs: CSCvb94392.

A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806.

A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.

A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321.

A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898.

A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158.

A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320.

A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.

A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.

A vulnerability in the Layer 2 punt code of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a queue wedge on an interface that receives specific Layer 2 frames, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of certain Layer 2 frames. An attacker could exploit this vulnerability by sending specific Layer 2 frames on the segment the router is connected to. A successful exploit could allow the attacker to cause a queue wedge on the interface, resulting in a DoS condition.

A vulnerability in the handling of Inter-Access Point Protocol (IAPP) messages by Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability exist because the software improperly validates input on fields within IAPP messages. An attacker could exploit the vulnerability by sending malicious IAPP messages to an affected device. A successful exploit could allow the attacker to cause the Cisco WLC Software to reload, resulting in a DoS condition. Software versions prior to 8.2.170.0, 8.5.150.0, and 8.8.100.0 are affected.

A vulnerability in the handling of Inter-Access Point Protocol (IAPP) messages by Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability exist because the software improperly validates input on fields within IAPP messages. An attacker could exploit the vulnerability by sending malicious IAPP messages to an affected device. A successful exploit could allow the attacker to cause the Cisco WLC Software to reload, resulting in a DoS condition. Software versions prior to 8.2.170.0, 8.5.150.0, and 8.8.100.0 are affected.

A vulnerability in the web interface of Cisco IoT Field Network Director could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. A successful exploit could increase the resource usage on the system, eventually leading to a DoS condition.

A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in the TIFF file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the implementation of the Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the incorrect processing of a BGP update message that contains specific EVPN attributes. An attacker could exploit this vulnerability by sending a BGP update message that contains specific EVPN attributes. To exploit this vulnerability, an attacker must control a BGP speaker that has an established trusted peer connection to an affected device that is configured with the address family L2VPN EVPN to receive and process the update message. This vulnerability cannot be exploited by any data that is initiated by clients on the Layer 2 network or by peers that are not configured to accept the L2VPN EVPN address family. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP updates only from explicitly defined peers. For this vulnerability to be exploited, the malicious BGP update message must either come from a configured, valid BGP peer or be injected by the attacker into the affected BGP network on an existing, valid TCP connection to a BGP peer.

A vulnerability in the RADIUS feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by attempting to authenticate to a network or a service where the access server is using Cisco ISE as the RADIUS server. A successful exploit could allow the attacker to cause Cisco ISE to stop processing RADIUS requests, causing authentication/authorization timeouts, which would then result in legitimate requests being denied access. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) is required. See the Details section for more information.

A vulnerability in the DNS-based Authentication of Named Entities (DANE) email verification component of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling in DNS name resolution by the affected software. An attacker could exploit this vulnerability by sending specially formatted email messages that are processed by an affected device. A successful exploit could allow the attacker to cause the device to become unreachable from management interfaces or to process additional email messages for a period of time until the device recovers, resulting in a DoS condition. Continued attacks could cause the device to become completely unavailable, resulting in a persistent DoS condition.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in CHM file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the management web server of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with high privileges to execute configuration commands on an affected system. This vulnerability exists because access to HTTPS endpoints is not properly restricted on an affected device. An attacker could exploit this vulnerability by sending specific messages to the affected HTTPS handler. A successful exploit could allow the attacker to perform configuration changes on the affected system, which should be configured and managed only through Cisco Firepower Management Center (FMC) Software.

A vulnerability in the remote access SSL VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of errors that are logged as a result of client connections that are made using remote access VPN. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.

A vulnerability in the rate limiter for Bidirectional Forwarding Detection (BFD) traffic of Cisco NX-OS Software for Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause BFD traffic to be dropped on an affected device. This vulnerability is due to a logic error in the BFD rate limiter functionality. An attacker could exploit this vulnerability by sending a crafted stream of traffic through the device. A successful exploit could allow the attacker to cause BFD traffic to be dropped, resulting in BFD session flaps. BFD session flaps can cause route instability and dropped traffic, resulting in a denial of service (DoS) condition. This vulnerability applies to both IPv4 and IPv6 traffic.

A vulnerability in the DHCP processing functionality of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DHCP messages. An attacker could exploit this vulnerability by sending malicious DHCP messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the Cisco Discovery Protocol service of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the service to restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of Cisco Discovery Protocol messages that are processed by the Cisco Discovery Protocol service. An attacker could exploit this vulnerability by sending a series of malicious Cisco Discovery Protocol messages to an affected device. A successful exploit could allow the attacker to cause the Cisco Discovery Protocol service to fail and restart. In rare conditions, repeated failures of the process could occur, which could cause the entire device to restart.

A vulnerability in the Snort rule evaluation function of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of the DNS reputation enforcement rule. An attacker could exploit this vulnerability by sending crafted UDP packets through an affected device to force a buildup of UDP connections. A successful exploit could allow the attacker to cause traffic that is going through the affected device to be dropped, resulting in a DoS condition. Note: This vulnerability only affects Cisco FTD devices that are running Snort 3.