A vulnerability in the internal message processing of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, local attacker to run arbitrary commands with root privileges on the underlying operating system (OS). This vulnerability exists because an internal messaging service does not properly sanitize input. An attacker could exploit this vulnerability by first authenticating to the device and then sending a crafted request to the internal service. A successful exploit could allow the attacker to run arbitrary commands with root privileges on the underlying OS. To exploit this vulnerability, the attacker must have valid Administrator credentials for the device.

A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device.

A vulnerability in one of the diagnostic test CLI commands of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code on an affected device. To exploit this vulnerability, the attacker would need to have valid user credentials at privilege level 15. This vulnerability exists because the affected software permits modification of the run-time memory of an affected device under specific circumstances. An attacker could exploit this vulnerability by authenticating to the affected device and issuing a specific diagnostic test command at the CLI. A successful exploit could trigger a logic error in the code that was designed to restrict run-time memory modifications. The attacker could take advantage of this logic error to overwrite system memory locations and execute arbitrary code on the underlying Linux operating system (OS) of the affected device.

A vulnerability in the dynamic link library (DLL) loading mechanism in Cisco Advanced Malware Protection (AMP) for Endpoints Windows Connector, ClamAV for Windows, and Immunet could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected Windows system. To exploit this vulnerability, the attacker would need valid credentials on the system. The vulnerability is due to insufficient validation of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on an affected system. A successful exploit could allow the attacker to execute arbitrary code with SYSTEM privileges.

A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS.

A vulnerability in the dragonite debugger of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root privilege. The vulnerability is due to the presence of development testing and verification scripts that remained on the device. An attacker could exploit this vulnerability by bypassing the consent token mechanism with the residual scripts on the affected device. A successful exploit could allow the attacker to escalate from privilege level 15 to root privilege.

A vulnerability in the ROM Monitor (ROMMON) of Cisco IOS XE Software for Cisco Catalyst IE3200, IE3300, and IE3400 Rugged Series Switches, Cisco Catalyst IE3400 Heavy Duty Series Switches, and Cisco Embedded Services 3300 Series Switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of specific function arguments passed to a boot script when specific ROMMON variables are set. An attacker could exploit this vulnerability by setting malicious values for a specific ROMMON variable. A successful exploit could allow the attacker to execute unsigned code and bypass the image verification check during the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated, physical access to the device or obtain privileged access to the root shell on the device.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in the SSH management feature of multiple Cisco Access Points (APs) platforms could allow a local, authenticated user to modify files on the affected device and possibly gain escalated privileges. The vulnerability is due to improper checking on file operations within the SSH management interface. A network administrator user could exploit this vulnerability by accessing an affected device through SSH management to make a configuration change. A successful exploit could allow the attacker to gain privileges equivalent to the root user.

A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient restrictions during the execution of a specific CLI command. An attacker with administrative privileges could exploit this vulnerability by performing a command injection attack on the vulnerable command. A successful exploit could allow the attacker to access the underlying operating system as root.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

The (1) TTLS CHAP, (2) TTLS MSCHAP, (3) TTLS MSCHAPv2, (4) TTLS PAP, (5) MD5, (6) GTC, (7) LEAP, (8) PEAP MSCHAPv2, (9) PEAP GTC, and (10) FAST authentication methods in Cisco Secure Services Client (CSSC) 4.x, Trust Agent 1.x and 2.x, Cisco Security Agent (CSA) 5.0 and 5.1 (when a vulnerable Trust Agent has been deployed), and the Meetinghouse AEGIS SecureConnect Client store transmitted authentication credentials in plaintext log files, which allows local users to obtain sensitive information by reading these files, aka CSCsg34423.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root.

A vulnerability in the Network Access Manager and Web Security Agent components of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL injection attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path in the system which, in turn, causes a malicious DLL file to be loaded when the application starts. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the support tunnel feature of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to access the device's shell. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by tricking the device into unlocking the support user account and accessing the tunnel password and device serial number. A successful exploit could allow the attacker to run any system command with root access. This affects Cisco Identity Services Engine (ISE) software versions prior to 2.2.0.470. Cisco Bug IDs: CSCvf54409.

A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

A vulnerability in the embedded test subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers could allow an authenticated, local attacker to write arbitrary values to arbitrary locations in the memory space of an affected device. The vulnerability is due to the presence of certain test commands that were intended to be available only in internal development builds of the affected software. An attacker could exploit this vulnerability by using these commands on an affected device. A successful exploit could allow the attacker to write arbitrary values to arbitrary locations in the memory space of the affected device.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.

Cisco VPN Client 5.x through 5.0.07.0440 uses weak permissions for vpnclient.ini, which allows local users to gain privileges by entering an arbitrary program name in the Command field of the ApplicationLauncher section.

Cisco Prime Network Registrar (CPNR) 8.1(3.3), 8.2(3), and 8.3(2) has a default account, which allows local users to obtain root access by leveraging knowledge of the credentials, aka Bug ID CSCuw21825.

The Management I/O (MIO) component in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows local users to execute arbitrary OS commands as root via crafted CLI input, aka Bug ID CSCux10578.

Cisco Aironet 1850 access points with software 8.1(112.4) allow local users to gain privileges via crafted CLI commands, aka Bug ID CSCuv79694.

Untrusted search path vulnerability in the CMainThread::launchDownloader function in vpndownloader.exe in Cisco AnyConnect Secure Mobility Client 2.0 through 4.1 on Windows allows local users to gain privileges via a Trojan horse DLL in the current working directory, as demonstrated by dbghelp.dll, aka Bug ID CSCuv01279. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-4211.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by providing crafted options to a specific command. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system.

A vulnerability in Cisco FXOS Software could allow an authenticated, local attacker with administrative credentials to cause a buffer overflow condition. The vulnerability is due to incorrect bounds checking of values that are parsed from a specific file. An attacker could exploit this vulnerability by supplying a crafted file that, when it is processed, may cause a stack-based buffer overflow. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system with root privileges. An attacker would need to have valid administrative credentials to exploit this vulnerability.

A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local CLI shell user to elevate privileges and gain full administrative control of the device. The vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker could exploit this vulnerability by first authenticating to the local CLI shell on the device and using the CLI command to bypass the task group–based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on the device without authorization checks.

A vulnerability in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their Cisco FTD instance and execute commands with root privileges in the host namespace. The attacker must have valid credentials on the device.The vulnerability exists because a configuration file that is used at container startup has insufficient protections. An attacker could exploit this vulnerability by modifying a specific container configuration file on the underlying file system. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running Cisco FTD instances or the host Cisco FXOS device.

Cisco AnyConnect Secure Mobility Client 4.1(8) on OS X and Linux does not verify pathnames before installation actions, which allows local users to obtain root privileges via a crafted installation file, aka Bug ID CSCuv11947.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the upgrade component of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to install a malicious file when upgrading. The vulnerability is due to insufficient signature validation. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to upload crafted code to the affected device.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.

A vulnerability in the secure boot process of Cisco FXOS Software could allow an authenticated, local attacker to bypass the secure boot mechanisms. The vulnerability is due to insufficient protections of the secure boot process. An attacker could exploit this vulnerability by injecting code into a specific file that is then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device which would be executed at each boot and maintain persistence across reboots.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to a utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient security controls on the CLI. An attacker could exploit this vulnerability by using an affected CLI utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root group on the underlying operating system. The vulnerability is due to incorrect permissions being set when the affected command is executed. An attacker could exploit this vulnerability by executing the affected command on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in the persistent Telnet/Secure Shell (SSH) CLI of Cisco IOS XE Software could allow an authenticated, local attacker to gain shell access on an affected device and execute commands on the underlying operating system (OS) with root privileges. The vulnerability is due to insufficient enforcement of the consent token in authorizing shell access. An attacker could exploit this vulnerability by authenticating to the persistent Telnet/SSH CLI on an affected device and requesting shell access. A successful exploit could allow the attacker to gain shell access on the affected device and execute commands on the underlying OS with root privileges.

A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the implementation of the Lua interpreter that is integrated in Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code with root privileges on the underlying Linux operating system (OS) of an affected device. The vulnerability is due to insufficient restrictions on Lua function calls within the context of user-supplied Lua scripts. An attacker with valid administrative credentials could exploit this vulnerability by submitting a malicious Lua script. When this file is processed, an exploitable buffer overflow condition could occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying Linux OS of the affected device.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco Data Center Network Manager (DCNM) could allow an authenticated, local attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient restrictions during the execution of an affected CLI command. An attacker could exploit this vulnerability by authenticating as the fmserver user and submitting malicious input to a specific command. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system.