SAP NetWeaver Internet Transaction Server (ITS), SAP Basis from 7.00 to 7.02, 7.30, 7.31, 7.40, from 7.50 to 7.52, allows an attacker with administrator credentials to inject code that can be executed by the application and thereby control the behavior of the application.

The ACL (Access Control List) of SAP Message Server - versions KERNEL 7.22, KERNEL 7.53, KERNEL 7.54, KERNEL 7.77, RNL64UC 7.22, RNL64UC 7.22EXT, RNL64UC 7.53, KRNL64NUC 7.22, KRNL64NUC 7.22EXT, can be bypassed in certain conditions, which may enable an authenticated malicious user to enter the network of the SAP systems served by the attacked SAP Message server. This may lead to unauthorized read and write of data as well as rendering the system unavailable.

Server Side Request Forgery (SSRF) vulnerability in SAP NetWeaver Knowledge Management Configuration Service, EPBC and EPBC2 from 7.00 to 7.02; KMC-BC 7.30, 7.31, 7.40 and 7.50, that allows an attacker to manipulate the vulnerable application to send crafted requests on behalf of the application.

Due to programming error in function module and report, IS-OIL component in SAP ECC and SAP S/4HANA allows an authenticated attacker to inject an arbitrary operating system command into an unprotected parameter in a common (default) extension.  On successful exploitation, the attacker can read or modify the system data as well as shut down the system.

SAP NetWeaver Knowledge Management XML Forms versions - 7.10, 7.11, 7.30, 7.31, 7.40, 7.50, contains an XSLT vulnerability which allows a non-administrative authenticated attacker to craft a malicious XSL stylesheet file containing a script with OS-level commands, copy it into a location to be accessed by the system and then create a file which will trigger the XSLT engine to execute the script contained within the malicious XSL file. This can result in a full compromise of the confidentiality, integrity, and availability of the system.

SAP NetWeaver (Visual Composer 7.0 RT) versions - 7.30, 7.31, 7.40, 7.50, without restriction, an attacker authenticated as a non-administrative user can upload a malicious file over a network and trigger its processing, which is capable of running operating system commands with the privilege of the Java Server process. These commands can be used to read or modify any information on the server or shut the server down making it unavailable.

Due to improper input sanitization, an authenticated user with certain specific privileges can remotely call NZDT function modules listed in Solution Section to execute manipulated query or inject ABAP code to gain access to Backend Database. On successful exploitation the threat actor could completely compromise confidentiality, integrity, and availability of the system.

An attacker authenticated as a user with a non-administrative role and a common remote execution authorization in SAP Solution Manager and ABAP managed systems (ST-PI) - versions 2088_1_700, 2008_1_710, 740, can use a vulnerable interface to execute an application function to perform actions which they would not normally be permitted to perform.  Depending on the function executed, the attack can read or modify any user or application data and can make the application unavailable.

In some scenario, SAP Business Objects Business Intelligence Platform (CMC) - versions 420, 430, Program Object execution can lead to code injection vulnerability which could allow an attacker to gain access to resources that are allowed by extra privileges. Successful attack could highly impact the confidentiality, Integrity, and Availability of the system.

Knowledge Management (XMLForms) in SAP NetWeaver, versions 7.30, 7.31, 7.40 and 7.50 does not sufficiently validate an XML document accepted from an untrusted source.

SAP BusinessObjects Business Intelligence Analysis edition for OLAP allows an authenticated attacker to inject malicious code that can be executed by the application over the network. On successful exploitation, an attacker can perform operations that may completely compromise the application causing a high impact on the confidentiality, integrity, and availability of the application.

The software logistics system of SAP NetWeaver AS ABAP and ABAP Platform versions - 700, 701, 702, 710, 730, 731, 740, 750, 751, 752, 753, 754, 755, 756, enables a malicious user to transfer ABAP code artifacts or content, by-passing the established quality gates. By this vulnerability malicious code can reach quality and production, and can compromise the confidentiality, integrity, and availability of the system and its data.

SAP Business Object (Adaptive Job Server) - versions 420, 430, allows remote execution of arbitrary commands on Unix, when program objects execution is enabled, to authenticated users with scheduling rights, using the BI Launchpad, Central Management Console or a custom application based on the public java SDK. Programs could impact the confidentiality, integrity and availability of the system.

SAP BPC MS 10.0 - version 810, allows an unauthorized attacker to execute crafted database queries. The exploitation of this issue could lead to SQL injection vulnerability and could allow an attacker to access, modify, and/or delete data from the backend database.

SAP NetWeaver Application Server Java (User Management Engine), versions- 7.10, 7.11, 7.20, 7.30, 7.31, 7.40, 7.50; does not sufficiently validate the LDAP data source configuration XML document accepted from an untrusted source, leading to Missing XML Validation.

Customizing functionality of SAP NetWeaver AS ABAP Platform (fixed in versions from 7.0 to 7.02, from 7.10 to 7.11, 7.30, 7.31, 7.40, from 7.50 to 7.53, from 7.74 to 7.75) does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges.

A missing authority check in SAP CRM, versions - 700, 701, 702, 712, 713, 714, could be leveraged by an attacker with high privileges to compromise confidentiality, integrity, or availability of the system.

SAP Business One, version - 10.0, allows an attacker with business authorization to upload any files (including script files) without the proper file format validation.

SAP NetWeaver Guided Procedures (Administration Workset), versions - 7.10, 7.20, 7.30, 7.31, 7.40, 7.50, does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges. The impact of missing authorization could result to abuse of functionality restricted to a particular user group, and could allow unauthorized users to read, modify or delete restricted data.

Due to the unrestricted scope of the RFC function module, SAP BASIS - versions 731, 740, 750, 751, 752, 753, 754, 755, 756, 757, 789, 790, 791, allows an authenticated non-administrator attacker to access a system class and execute any of its public methods with parameters provided by the attacker. On successful exploitation the attacker can have full control of the system to which the class belongs, causing a high impact on the integrity of the application.

SAP Business Objects Platform - versions 420, and 430, allows an attacker with normal BI user privileges to upload/replace any file on Business Objects server at the operating system level, enabling the attacker to take full control of the system causing a high impact on confidentiality, integrity, and availability of the application.

In some workflow of SAP BusinessObjects BI Platform (Central Management Console and BI LaunchPad), an authenticated attacker with low privileges can intercept a serialized object in the parameters and substitute with another malicious serialized object, which leads to deserialization of untrusted data vulnerability. This could highly compromise the Confidentiality, Integrity, and Availability of the system.

SAP Commerce, versions - 1808, 1811, 1905, 2005, 2011, Backoffice application allows certain authorized users to create source rules which are translated to drools rule when published to certain modules within the application. An attacker with this authorization can inject malicious code in the source rules and perform remote code execution enabling them to compromise the confidentiality, integrity and availability of the application.

The Service Layer of SAP Business One, version - 10.0, allows an authenticated attacker to invoke certain functions that would otherwise be restricted to specific users. For an attacker to discover the vulnerable function, no in-depth system knowledge is required. Once exploited via Network stack, the attacker may be able to read, modify or delete restricted data. The impact is that missing authorization can result of abuse of functionality usually restricted to specific users.

Server-Side Request Forgery (SSRF) vulnerability has been detected in the SAP NetWeaver Development Infrastructure Component Build Service versions - 7.11, 7.20, 7.30, 7.31, 7.40, 7.50The SAP NetWeaver Development Infrastructure Component Build Service allows a threat actor who has access to the server to perform proxy attacks on server by sending crafted queries. Due to this, the threat actor could completely compromise sensitive data residing on the Server and impact its availability.Note: The impact of this vulnerability depends on whether SAP NetWeaver Development Infrastructure (NWDI) runs on the intranet or internet. The CVSS score reflects the impact considering the worst-case scenario that it runs on the internet.

The XML Data Archiving Service (XML DAS) in SAP NetWeaver AS Java does not check authorization, which allows remote authenticated users to obtain sensitive information, gain privileges, or possibly have unspecified other impact via requests to (1) webcontent/cas/cas_enter.jsp, (2) webcontent/cas/cas_validate.jsp, or (3) webcontent/aas/aas_store.jsp, aka SAP Security Note 1945215.

SAP Software Provisioning Manager 1.0 (SAP NetWeaver Master Data Management Server 7.1) does not have an option to set password during its installation, this allows an authenticated attacker to perform various security attacks like Directory Traversal, Password Brute force Attack, SMB Relay attack, Security Downgrade.

Multiple SQL injection vulnerabilities in the Web-based Development Workbench in SAP HANA DB 1.00.73.00.389160 (NewDB100_REL) allow remote authenticated users to execute arbitrary SQL commands via unspecified vectors in the (1) trace configuration page or (2) getSqlTraceConfiguration function, aka SAP Security Note 2153898.

SAP MII allows users to create dashboards and save them as JSP through the SSCE (Self Service Composition Environment). An attacker can intercept a request to the server, inject malicious JSP code in the request and forward to server. When this dashboard is opened by users having at least SAP_XMII Developer role, malicious content in the dashboard gets executed, leading to remote code execution in the server, which allows privilege escalation. The malicious JSP code can contain certain OS commands, through which an attacker can read sensitive files in the server, modify files or even delete contents in the server thus compromising the confidentiality, integrity and availability of the server hosting the SAP MII application. Also, an attacker authenticated as a developer can use the application to upload and execute a file which will permit them to execute operating systems commands completely compromising the server hosting the application.

The OS Command Plugin in the transaction GPA_ADMIN and the OSCommand Console of SAP Diagnostic Agent (LM-Service), version 7.2, allow an attacker to inject code that can be executed by the application. An attacker could thereby control the behavior of the application.

Banking services from SAP 9.0 (FSAPPL version 5) and SAP S/4HANA Financial Products Subledger (S4FPSL, version 1) performs an inadequate authorization check for an authenticated user, potentially resulting in escalation of privileges.

Transaction Management in SAP Treasury and Risk Management (corrected in S4CORE versions 1.01, 1.02, 1.03, 1.04 and EA-FINSERV versions 6.0, 6.03, 6.04, 6.05, 6.06, 6.16, 6.17, 6.18, 8.0) does not perform necessary authorization checks for functionalities that require user identity.

Transaction Management in SAP Treasury and Risk Management (corrected in S4CORE versions 1.01, 1.02, 1.03, 1.04 and EA-FINSERV versions 6.0, 6.03, 6.04, 6.05, 6.06, 6.16, 6.17, 6.18, 8.0) does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges.

An administrator of SAP NetWeaver Application Server Java (J2EE-Framework), (corrected in versions 7.1, 7.2, 7.3, 7.31, 7.4, 7.5), may change privileges for all or some functions in Java Server, and enable users to execute functions, they are not allowed to execute otherwise.

SAP Treasury and Risk Management (EA-FINSERV 6.0, 6.03, 6.04, 6.05, 6.06, 6.16, 6.17, 6.18 and 8.0; S4CORE 1.01, 1.02 and 1.03), does not perform necessary authorization checks for authorization objects T_DEAL_DP and T_DEAL_PD , resulting in escalation of privileges.

SAP Disclosure Management, version 10.01, does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges.

SAP Commerce Cloud (Mediaconversion Extension), versions 6.4, 6.5, 6.6, 6.7, 1808, 1811, 1905, allows an authenticated Backoffice/HMC user to inject code that can be executed by the application, leading to Code Injection. An attacker could thereby control the behavior of the application.

ABAP Server of SAP NetWeaver and ABAP Platform fail to perform necessary authorization checks for an authenticated user, resulting in escalation of privileges. This has been corrected in the following versions: KRNL32NUC 7.21, 7.21EXT, 7.22, 7.22EXT, KRNL32UC 7.21, 7.21EXT, 7.22, 7.22EXT, KRNL64NUC 7.21, 7.21EXT, 7.22, 7.22EXT, 7.49, 7.74, KRNL64UC 7.21, 7.21EXT, 7.22, 7.22EXT, 7.49, 7.73, 7.74, 8.04, KERNEL 7.21, 7.45, 7.49, 7.53, 7.73, 7.74, 7.75, 8.04.

Order processing in SAP ERP Sales (corrected in SAP_APPL 6.0, 6.02, 6.03, 6.04, 6.05, 6.06, 6.16, 6.17, 6.18) and S4HANA Sales (corrected in S4CORE 1.0, 1.01, 1.02, 1.03, 1.04) does not execute the required authorization checks for an authenticated user, which can result in an escalation of privileges.

Under certain conditions, it is possible to request the modification of role or privilege assignments through SAP Identity Management REST Interface Version 2, which would otherwise be restricted only for viewing.

SAP NetWeaver Application Server Java Web Container, ENGINEAPI (before versions 7.10, 7.20, 7.30, 7.31, 7.40, 7.50) and SAP-JEECOR (before versions 6.40, 7.0, 7.01), allows an attacker to inject code that can be executed by the application. An attacker could thereby control the behaviour of the application.

Multiple SQL injection vulnerabilities in the Web-based Development Workbench in SAP HANA DB 1.00.091.00.1418659308 allow remote authenticated users to execute arbitrary SQL commands via the (1) remoteSourceName in the dropCredentials function or unspecified vectors in the (2) setTraceLevelsForXsApps, (3) _modifyUser, or (4) _newUser function, aka SAP Security Notes 2153898 and 2153765.

SAP NetWeaver for Java Application Server - Web Container, (engineapi, versions 7.1, 7.2, 7.3, 7.31, 7.4 and 7.5), (servercode, versions 7.2, 7.3, 7.31, 7.4, 7.5), allows an attacker to upload files (including script files) without proper file format validation.

A remote code execution vulnerability exists in the SAP NetWeaver UDDI Server (Services Registry), versions 7.10, 7.20, 7.30, 7.31, 7.40, 7.50. Because of this, an attacker can exploit Services Registry potentially enabling them to take complete control of the product, including viewing, changing, or deleting data by injecting code into the working memory which is subsequently executed by the application. It can also be used to cause a general fault in the product, causing the product to terminate.

Buffer overflow in the C_SAPGPARAM function in the NetWeaver Dispatcher in SAP KERNEL 7.00 (7000.52.12.34966) and 7.40 (7400.12.21.30308) allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, aka SAP Security Note 2063369.

ABAP BASIS function modules INST_CREATE_R3_RFC_DEST, INST_CREATE_TCPIP_RFCDEST, and INST_CREATE_TCPIP_RFC_DEST in SAP BASIS (fixed in versions 7.0 to 7.02, 7.10 to 7.30, 7.31, 7.40, 7.50 to 7.53) do not perform necessary authorization checks in all circumstances for an authenticated user, resulting in escalation of privileges.

Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the Spool System, aka SAP Note 2061271.

Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the ABAP VM, aka SAP Note 2059734.

Missing authorization check in SAP HCM Fiori "People Profile" (GBX01 HR version 6.0) for an authenticated user which may result in an escalation of privileges.

SAP CRM, 7.01, 7.02,7.30, 7.31, 7.33, 7.54, allows an attacker to exploit insufficient validation of path information provided by users, thus characters representing "traverse to parent directory" are passed through to the file APIs.