IBM Personal Communications v14 and v15 include a Windows service that is vulnerable to local privilege escalation (LPE). The vulnerability allows any interactively logged in users on the target computer to run commands with full privileges in the context of NT AUTHORITY\SYSTEM. This allows for a low privileged attacker to escalate their privileges. This vulnerability is due to an incomplete fix for CVE-2024-25029.

A heap out-of-bounds write vulnerability in the Linux kernel's Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation. If perf_read_group() is called while an event's sibling_list is smaller than its child's sibling_list, it can increment or write to memory locations outside of the allocated buffer. We recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.

dpkg 1.9.21 does not properly reset the metadata of a file during replacement of the file in a package upgrade, which might allow local users to gain privileges by creating a hard link to a vulnerable (1) setuid file, (2) setgid file, or (3) device, a related issue to CVE-2010-2059.

In the Linux kernel, the following vulnerability has been resolved: ublk: fail to start device if queue setup is interrupted In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered. Reported by German when working on qemu-storage-deamon which requires single thread ublk daemon.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: possible buffer overflow Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access.

In the Linux kernel, the following vulnerability has been resolved: PCI: s390: Fix use-after-free of PCI resources with per-function hotplug On s390 PCI functions may be hotplugged individually even when they belong to a multi-function device. In particular on an SR-IOV device VFs may be removed and later re-added. In commit a50297cf8235 ("s390/pci: separate zbus creation from scanning") it was missed however that struct pci_bus and struct zpci_bus's resource list retained a reference to the PCI functions MMIO resources even though those resources are released and freed on hot-unplug. These stale resources may subsequently be claimed when the PCI function re-appears resulting in use-after-free. One idea of fixing this use-after-free in s390 specific code that was investigated was to simply keep resources around from the moment a PCI function first appeared until the whole virtual PCI bus created for a multi-function device disappears. The problem with this however is that due to the requirement of artificial MMIO addreesses (address cookies) extra logic is then needed to keep the address cookies compatible on re-plug. At the same time the MMIO resources semantically belong to the PCI function so tying their lifecycle to the function seems more logical. Instead a simpler approach is to remove the resources of an individually hot-unplugged PCI function from the PCI bus's resource list while keeping the resources of other PCI functions on the PCI bus untouched. This is done by introducing pci_bus_remove_resource() to remove an individual resource. Similarly the resource also needs to be removed from the struct zpci_bus's resource list. It turns out however, that there is really no need to add the MMIO resources to the struct zpci_bus's resource list at all and instead we can simply use the zpci_bar_struct's resource pointer directly.

A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Racing a io_uring cancel poll request with a linked timeout can cause a UAF in a hrtimer. We recommend upgrading past commit ef7dfac51d8ed961b742218f526bd589f3900a59 (4716c73b188566865bdd79c3a6709696a224ac04 for 5.10 stable and 0e388fce7aec40992eadee654193cad345d62663 for 5.15 stable).

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix xsk_diag use-after-free error during socket cleanup Fix a use-after-free error that is possible if the xsk_diag interface is used after the socket has been unbound from the device. This can happen either due to the socket being closed or the device disappearing. In the early days of AF_XDP, the way we tested that a socket was not bound to a device was to simply check if the netdevice pointer in the xsk socket structure was NULL. Later, a better system was introduced by having an explicit state variable in the xsk socket struct. For example, the state of a socket that is on the way to being closed and has been unbound from the device is XSK_UNBOUND. The commit in the Fixes tag below deleted the old way of signalling that a socket is unbound, setting dev to NULL. This in the belief that all code using the old way had been exterminated. That was unfortunately not true as the xsk diagnostics code was still using the old way and thus does not work as intended when a socket is going down. Fix this by introducing a test against the state variable. If the socket is in the state XSK_UNBOUND, simply abort the diagnostic's netlink operation.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function When a reset notify IPC message is received, the ISR schedules a work function and passes the ISHTP device to it via a global pointer ishtp_dev. If ish_probe() fails, the devm-managed device resources including ishtp_dev are freed, but the work is not cancelled, causing a use-after-free when the work function tries to access ishtp_dev. Use devm_work_autocancel() instead, so that the work is automatically cancelled if probe fails.

Integer overflow in the SCTP_SOCKOPT_DEBUG_NAME SCTP socket option in socket.c in the Linux kernel 2.4.25 and earlier allows local users to execute arbitrary code via an optlen value of -1, which causes kmalloc to allocate 0 bytes of memory.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert. So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq should be executed under such condition, otherwise, an amdgpu_irq_put calltrace will occur. [ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246 [ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000 [ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000 [ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006 [ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050 [ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.170986] Call Trace: [ 7283.170988] <TASK> [ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu] [ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.173412] pci_pm_freeze+0x54/0xc0 [ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10 [ 7283.173425] dpm_run_callback+0x98/0x200 [ 7283.173430] __device_suspend+0x164/0x5f0 v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking)

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() The function mpi3mr_get_all_tgt_info() has four issues: 1) It calculates valid entry length in alltgt_info assuming the header part of the struct mpi3mr_device_map_info would equal to sizeof(u32). The correct size is sizeof(u64). 2) When it calculates the valid entry length kern_entrylen, it excludes one entry by subtracting 1 from num_devices. 3) It copies num_device by calling memcpy(). Substitution is enough. 4) It does not specify the calculated length to sg_copy_from_buffer(). Instead, it specifies the payload length which is larger than the alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds". Fix the issues by using the correct header size, removing the subtraction from num_devices, replacing the memcpy() with substitution and specifying the correct length to sg_copy_from_buffer().

In the Linux kernel, the following vulnerability has been resolved: nubus: Partially revert proc_create_single_data() conversion The conversion to proc_create_single_data() introduced a regression whereby reading a file in /proc/bus/nubus results in a seg fault: # grep -r . /proc/bus/nubus/e/ Data read fault at 0x00000020 in Super Data (pc=0x1074c2) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<001074c2>] PDE_DATA+0xc/0x16 SR: 2010 SP: 38284958 a2: 01152370 d0: 00000001 d1: 01013000 d2: 01002790 d3: 00000000 d4: 00000001 d5: 0008ce2e a0: 00000000 a1: 00222a40 Process grep (pid: 45, task=142f8727) Frame format=B ssw=074d isc=2008 isb=4e5e daddr=00000020 dobuf=01199e70 baddr=001074c8 dibuf=ffffffff ver=f Stack from 01199e48: 01199e70 00222a58 01002790 00000000 011a3000 01199eb0 015000c0 00000000 00000000 01199ec0 01199ec0 000d551a 011a3000 00000001 00000000 00018000 d003f000 00000003 00000001 0002800d 01052840 01199fa8 c01f8000 00000000 00000029 0b532b80 00000000 00000000 00000029 0b532b80 01199ee4 00103640 011198c0 d003f000 00018000 01199fa8 00000000 011198c0 00000000 01199f4c 000b3344 011198c0 d003f000 00018000 01199fa8 00000000 00018000 011198c0 Call Trace: [<00222a58>] nubus_proc_rsrc_show+0x18/0xa0 [<000d551a>] seq_read+0xc4/0x510 [<00018000>] fp_fcos+0x2/0x82 [<0002800d>] __sys_setreuid+0x115/0x1c6 [<00103640>] proc_reg_read+0x5c/0xb0 [<00018000>] fp_fcos+0x2/0x82 [<000b3344>] __vfs_read+0x2c/0x13c [<00018000>] fp_fcos+0x2/0x82 [<00018000>] fp_fcos+0x2/0x82 [<000b8aa2>] sys_statx+0x60/0x7e [<000b34b6>] vfs_read+0x62/0x12a [<00018000>] fp_fcos+0x2/0x82 [<00018000>] fp_fcos+0x2/0x82 [<000b39c2>] ksys_read+0x48/0xbe [<00018000>] fp_fcos+0x2/0x82 [<000b3a4e>] sys_read+0x16/0x1a [<00018000>] fp_fcos+0x2/0x82 [<00002b84>] syscall+0x8/0xc [<00018000>] fp_fcos+0x2/0x82 [<0000c016>] not_ext+0xa/0x18 Code: 4e5e 4e75 4e56 0000 206e 0008 2068 ffe8 <2068> 0020 2008 4e5e 4e75 4e56 0000 2f0b 206e 0008 2068 0004 2668 0020 206b ffe8 Disabling lock debugging due to kernel taint Segmentation fault The proc_create_single_data() conversion does not work because single_open(file, nubus_proc_rsrc_show, PDE_DATA(inode)) is not equivalent to the original code.

In the Linux kernel, the following vulnerability has been resolved: mptcp: use the workqueue to destroy unaccepted sockets Christoph reported a UaF at token lookup time after having refactored the passive socket initialization part: BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260 Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198 CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 __token_bucket_busy+0x253/0x260 mptcp_token_new_connect+0x13d/0x490 mptcp_connect+0x4ed/0x860 __inet_stream_connect+0x80e/0xd90 tcp_sendmsg_fastopen+0x3ce/0x710 mptcp_sendmsg+0xff1/0x1a20 inet_sendmsg+0x11d/0x140 __sys_sendto+0x405/0x490 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc We need to properly clean-up all the paired MPTCP-level resources and be sure to release the msk last, even when the unaccepted subflow is destroyed by the TCP internals via inet_child_forget(). We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra, explicitly checking that for the critical scenario: the closed subflow is the MPC one, the msk is not accepted and eventually going through full cleanup. With such change, __mptcp_destroy_sock() is always called on msk sockets, even on accepted ones. We don't need anymore to transiently drop one sk reference at msk clone time. Please note this commit depends on the parent one: mptcp: refactor passive socket initialization

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5 According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode. When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed. ============================================================= UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]' CPU: 37 PID: 1678 Comm: cat Not tainted 6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace: dump_backtrace+0xe0/0x130 show_stack+0x20/0x60 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 ubsan_epilogue+0x10/0x50 __ubsan_handle_out_of_bounds+0x80/0x90 acpi_ds_exec_end_op+0x1bc/0x6d8 acpi_ps_parse_loop+0x57c/0x618 acpi_ps_parse_aml+0x1e0/0x4b4 acpi_ps_execute_method+0x24c/0x2b8 acpi_ns_evaluate+0x3a8/0x4bc acpi_evaluate_object+0x15c/0x37c acpi_evaluate_integer+0x54/0x15c show_power+0x8c/0x12c [acpi_power_meter]

The SQLDriverConnect() function in unixODBC before 2.2.14p2 have a possible buffer overflow condition when specifying a large value for SAVEFILE parameter in the connection string.

In the Linux kernel, the following vulnerability has been resolved: netlink: prevent potential spectre v1 gadgets Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions.

In the Linux kernel, the following vulnerability has been resolved: perf: hisi: Fix use-after-free when register pmu fails When we fail to register the uncore pmu, the pmu context may not been allocated. The error handing will call cpuhp_state_remove_instance() to call uncore pmu offline callback, which migrate the pmu context. Since that's liable to lead to some kind of use-after-free. Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been failed to register.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix array out-of-bound access in SoC stats Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process() function access ath12k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_ ---truncated---

arch/powerpc/kvm/book3s_rtas.c in the Linux kernel through 5.13.5 on the powerpc platform allows KVM guest OS users to cause host OS memory corruption via rtas_args.nargs, aka CID-f62f3c20647e.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after failed write When buffered write fails to copy data into underlying page cache page, ocfs2_write_end_nolock() just zeroes out and dirties the page. This can leave dirty page beyond EOF and if page writeback tries to write this page before write succeeds and expands i_size, page gets into inconsistent state where page dirty bit is clear but buffer dirty bits stay set resulting in page data never getting written and so data copied to the page is lost. Fix the problem by invalidating page beyond EOF after failed write.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: davinci: Fix clk use after free The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used.

In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Add histograms to hist_vars if they have referenced variables Hist triggers can have referenced variables without having direct variables fields. This can be the case if referenced variables are added for trigger actions. In this case the newly added references will not have field variables. Not taking such referenced variables into consideration can result in a bug where it would be possible to remove hist trigger with variables being refenced. This will result in a bug that is easily reproducable like so $ cd /sys/kernel/tracing $ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events $ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger $ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger $ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger [ 100.263533] ================================================================== [ 100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180 [ 100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439 [ 100.266320] [ 100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4 [ 100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 100.268561] Call Trace: [ 100.268902] <TASK> [ 100.269189] dump_stack_lvl+0x4c/0x70 [ 100.269680] print_report+0xc5/0x600 [ 100.270165] ? resolve_var_refs+0xc7/0x180 [ 100.270697] ? kasan_complete_mode_report_info+0x80/0x1f0 [ 100.271389] ? resolve_var_refs+0xc7/0x180 [ 100.271913] kasan_report+0xbd/0x100 [ 100.272380] ? resolve_var_refs+0xc7/0x180 [ 100.272920] __asan_load8+0x71/0xa0 [ 100.273377] resolve_var_refs+0xc7/0x180 [ 100.273888] event_hist_trigger+0x749/0x860 [ 100.274505] ? kasan_save_stack+0x2a/0x50 [ 100.275024] ? kasan_set_track+0x29/0x40 [ 100.275536] ? __pfx_event_hist_trigger+0x10/0x10 [ 100.276138] ? ksys_write+0xd1/0x170 [ 100.276607] ? do_syscall_64+0x3c/0x90 [ 100.277099] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.277771] ? destroy_hist_data+0x446/0x470 [ 100.278324] ? event_hist_trigger_parse+0xa6c/0x3860 [ 100.278962] ? __pfx_event_hist_trigger_parse+0x10/0x10 [ 100.279627] ? __kasan_check_write+0x18/0x20 [ 100.280177] ? mutex_unlock+0x85/0xd0 [ 100.280660] ? __pfx_mutex_unlock+0x10/0x10 [ 100.281200] ? kfree+0x7b/0x120 [ 100.281619] ? ____kasan_slab_free+0x15d/0x1d0 [ 100.282197] ? event_trigger_write+0xac/0x100 [ 100.282764] ? __kasan_slab_free+0x16/0x20 [ 100.283293] ? __kmem_cache_free+0x153/0x2f0 [ 100.283844] ? sched_mm_cid_remote_clear+0xb1/0x250 [ 100.284550] ? __pfx_sched_mm_cid_remote_clear+0x10/0x10 [ 100.285221] ? event_trigger_write+0xbc/0x100 [ 100.285781] ? __kasan_check_read+0x15/0x20 [ 100.286321] ? __bitmap_weight+0x66/0xa0 [ 100.286833] ? _find_next_bit+0x46/0xe0 [ 100.287334] ? task_mm_cid_work+0x37f/0x450 [ 100.287872] event_triggers_call+0x84/0x150 [ 100.288408] trace_event_buffer_commit+0x339/0x430 [ 100.289073] ? ring_buffer_event_data+0x3f/0x60 [ 100.292189] trace_event_raw_event_sys_enter+0x8b/0xe0 [ 100.295434] syscall_trace_enter.constprop.0+0x18f/0x1b0 [ 100.298653] syscall_enter_from_user_mode+0x32/0x40 [ 100.301808] do_syscall_64+0x1a/0x90 [ 100.304748] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.307775] RIP: 0033:0x7f686c75c1cb [ 100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48 [ 100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021 [ 100.321200] RA ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix scheduling while atomic in decompression path [ 16.945668][ C0] Call trace: [ 16.945678][ C0] dump_backtrace+0x110/0x204 [ 16.945706][ C0] dump_stack_lvl+0x84/0xbc [ 16.945735][ C0] __schedule_bug+0xb8/0x1ac [ 16.945756][ C0] __schedule+0x724/0xbdc [ 16.945778][ C0] schedule+0x154/0x258 [ 16.945793][ C0] bit_wait_io+0x48/0xa4 [ 16.945808][ C0] out_of_line_wait_on_bit+0x114/0x198 [ 16.945824][ C0] __sync_dirty_buffer+0x1f8/0x2e8 [ 16.945853][ C0] __f2fs_commit_super+0x140/0x1f4 [ 16.945881][ C0] f2fs_commit_super+0x110/0x28c [ 16.945898][ C0] f2fs_handle_error+0x1f4/0x2f4 [ 16.945917][ C0] f2fs_decompress_cluster+0xc4/0x450 [ 16.945942][ C0] f2fs_end_read_compressed_page+0xc0/0xfc [ 16.945959][ C0] f2fs_handle_step_decompress+0x118/0x1cc [ 16.945978][ C0] f2fs_read_end_io+0x168/0x2b0 [ 16.945993][ C0] bio_endio+0x25c/0x2c8 [ 16.946015][ C0] dm_io_dec_pending+0x3e8/0x57c [ 16.946052][ C0] clone_endio+0x134/0x254 [ 16.946069][ C0] bio_endio+0x25c/0x2c8 [ 16.946084][ C0] blk_update_request+0x1d4/0x478 [ 16.946103][ C0] scsi_end_request+0x38/0x4cc [ 16.946129][ C0] scsi_io_completion+0x94/0x184 [ 16.946147][ C0] scsi_finish_command+0xe8/0x154 [ 16.946164][ C0] scsi_complete+0x90/0x1d8 [ 16.946181][ C0] blk_done_softirq+0xa4/0x11c [ 16.946198][ C0] _stext+0x184/0x614 [ 16.946214][ C0] __irq_exit_rcu+0x78/0x144 [ 16.946234][ C0] handle_domain_irq+0xd4/0x154 [ 16.946260][ C0] gic_handle_irq.33881+0x5c/0x27c [ 16.946281][ C0] call_on_irq_stack+0x40/0x70 [ 16.946298][ C0] do_interrupt_handler+0x48/0xa4 [ 16.946313][ C0] el1_interrupt+0x38/0x68 [ 16.946346][ C0] el1h_64_irq_handler+0x20/0x30 [ 16.946362][ C0] el1h_64_irq+0x78/0x7c [ 16.946377][ C0] finish_task_switch+0xc8/0x3d8 [ 16.946394][ C0] __schedule+0x600/0xbdc [ 16.946408][ C0] preempt_schedule_common+0x34/0x5c [ 16.946423][ C0] preempt_schedule+0x44/0x48 [ 16.946438][ C0] process_one_work+0x30c/0x550 [ 16.946456][ C0] worker_thread+0x414/0x8bc [ 16.946472][ C0] kthread+0x16c/0x1e0 [ 16.946486][ C0] ret_from_fork+0x10/0x20

A vulnerability exists in the memory management subsystem of the Linux kernel. The lock handling for accessing and updating virtual memory areas (VMAs) is incorrect, leading to use-after-free problems. This issue can be successfully exploited to execute arbitrary kernel code, escalate containers, and gain root privileges.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for bfqq in bic_set_bfqq() After commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'"), bic->bfqq will be accessed in bic_set_bfqq(), however, in some context bic->bfqq will be freed, and bic_set_bfqq() is called with the freed bic->bfqq. Fix the problem by always freeing bfqq after bic_set_bfqq().

In the Linux kernel, the following vulnerability has been resolved: EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info The memory for llcc_driv_data is allocated by the LLCC driver. But when it is passed as the private driver info to the EDAC core, it will get freed during the qcom_edac driver release. So when the qcom_edac driver gets probed again, it will try to use the freed data leading to the use-after-free bug. Hence, do not pass llcc_driv_data as pvt_info but rather reference it using the platform_data pointer in the qcom_edac driver.

In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Check start of empty przs during init After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as valid"), initialization would assume a prz was valid after seeing that the buffer_size is zero (regardless of the buffer start position). This unchecked start value means it could be outside the bounds of the buffer, leading to future access panics when written to: sysdump_panic_event+0x3b4/0x5b8 atomic_notifier_call_chain+0x54/0x90 panic+0x1c8/0x42c die+0x29c/0x2a8 die_kernel_fault+0x68/0x78 __do_kernel_fault+0x1c4/0x1e0 do_bad_area+0x40/0x100 do_translation_fault+0x68/0x80 do_mem_abort+0x68/0xf8 el1_da+0x1c/0xc0 __raw_writeb+0x38/0x174 __memcpy_toio+0x40/0xac persistent_ram_update+0x44/0x12c persistent_ram_write+0x1a8/0x1b8 ramoops_pstore_write+0x198/0x1e8 pstore_console_write+0x94/0xe0 ... To avoid this, also check if the prz start is 0 during the initialization phase. If not, the next prz sanity check case will discover it (start > size) and zap the buffer back to a sane state. [kees: update commit log with backtrace and clarifications]

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: mt8183: Add back SSPM related clocks This reverts commit 860690a93ef23b567f781c1b631623e27190f101. On the MT8183, the SSPM related clocks were removed claiming a lack of usage. This however causes some issues when the driver was converted to the new simple-probe mechanism. This mechanism allocates enough space for all the clocks defined in the clock driver, not the highest index in the DT binding. This leads to out-of-bound writes if their are holes in the DT binding or the driver (due to deprecated or unimplemented clocks). These errors can go unnoticed and cause memory corruption, leading to crashes in unrelated areas, or nothing at all. KASAN will detect them. Add the SSPM related clocks back to the MT8183 clock driver to fully implement the DT binding. The SSPM clocks are for the power management co-processor, and should never be turned off. They are marked as such.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix possible double unlock when moving a directory

In the Linux kernel, the following vulnerability has been resolved: fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:1965:6 index -84 is out of range for type 's8[341]' (aka 'signed char[341]') CPU: 1 PID: 4995 Comm: syz-executor146 Not tainted 6.4.0-rc6-syzkaller-00037-gb6dad5178cea #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAllocDmapLev+0x3e5/0x430 fs/jfs/jfs_dmap.c:1965 dbAllocCtl+0x113/0x920 fs/jfs/jfs_dmap.c:1809 dbAllocAG+0x28f/0x10b0 fs/jfs/jfs_dmap.c:1350 dbAlloc+0x658/0xca0 fs/jfs/jfs_dmap.c:874 dtSplitUp fs/jfs/jfs_dtree.c:974 [inline] dtInsert+0xda7/0x6b00 fs/jfs/jfs_dtree.c:863 jfs_create+0x7b6/0xbb0 fs/jfs/namei.c:137 lookup_open fs/namei.c:3492 [inline] open_last_lookups fs/namei.c:3560 [inline] path_openat+0x13df/0x3170 fs/namei.c:3788 do_filp_open+0x234/0x490 fs/namei.c:3818 do_sys_openat2+0x13f/0x500 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_openat fs/open.c:1388 [inline] __se_sys_openat fs/open.c:1383 [inline] __x64_sys_openat+0x247/0x290 fs/open.c:1383 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1f4e33f7e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc21129578 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f4e33f7e9 RDX: 000000000000275a RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f1f4e2ff080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f1f4e2ff110 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The bug occurs when the dbAllocDmapLev()function attempts to access dp->tree.stree[leafidx + LEAFIND] while the leafidx value is negative. To rectify this, the patch introduces a safeguard within the dbAllocDmapLev() function. A check has been added to verify if leafidx is negative. If it is, the function immediately returns an I/O error, preventing any further execution that could potentially cause harm. Tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix a potential overflow in sctp_ifwdtsn_skip Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only checks the pos against the end of the chunk. However, the data left for the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference it as struct sctp_ifwdtsn_skip may cause coverflow. This patch fixes it by checking the pos against "the end of the chunk - sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to sctp_fwdtsn_skip.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount syzbot found an invalid-free in diUnmount: BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674 Free of addr ffff88806f410000 by task syz-executor131/3632 CPU: 0 PID: 3632 Comm: syz-executor131 Not tainted 6.1.0-rc7-syzkaller-00012-gca57f02295f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:460 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3674 diUnmount+0xef/0x100 fs/jfs/jfs_imap.c:195 jfs_umount+0x108/0x370 fs/jfs/jfs_umount.c:63 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1428 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1186 task_work_run+0x243/0x300 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x664/0x2070 kernel/exit.c:820 do_group_exit+0x1fd/0x2b0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:959 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount. If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount(). JFS_IP(ipimap)->i_imap will be freed once again. Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free.

A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c. Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue. We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: mark requests for GuC virtual engines to avoid use-after-free References to i915_requests may be trapped by userspace inside a sync_file or dmabuf (dma-resv) and held indefinitely across different proceses. To counter-act the memory leaks, we try to not to keep references from the request past their completion. On the other side on fence release we need to know if rq->engine is valid and points to hw engine (true for non-virtual requests). To make it possible extra bit has been added to rq->execution_mask, for marking virtual engines. (cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580)

In the Linux kernel, the following vulnerability has been resolved: nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition This bug influences both st_nci_i2c_remove and st_nci_spi_remove. Take st_nci_i2c_remove as an example. In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work with llt_ndlc_sm_work. When it calls ndlc_recv or timeout handler, it will finally call schedule_work to start the work. When we call st_nci_i2c_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in ndlc_remove CPU0 CPU1 |llt_ndlc_sm_work st_nci_i2c_remove | ndlc_remove | st_nci_remove | nci_free_device| kfree(ndev) | //free ndlc->ndev | |llt_ndlc_rcv_queue |nci_recv_frame |//use ndlc->ndev

In the Linux kernel, the following vulnerability has been resolved: udf: Do not bother merging very long extents When merging very long extents we try to push as much length as possible to the first extent. However this is unnecessarily complicated and not really worth the trouble. Furthermore there was a bug in the logic resulting in corrupting extents in the file as syzbot reproducer shows. So just don't bother with the merging of extents that are too long together.

In the Linux kernel, the following vulnerability has been resolved: IORING_OP_READ did not correctly consume the provided buffer list when read i/o returned < 0 (except for -EAGAIN and -EIOCBQUEUED return). This can lead to a potential use-after-free when the completion via io_rw_done runs at separate context.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of new block group that became unused If a task creates a new block group and that block group becomes unused before we finish its creation, at btrfs_create_pending_block_groups(), then when btrfs_mark_bg_unused() is called against the block group, we assume that the block group is currently in the list of block groups to reclaim, and we move it out of the list of new block groups and into the list of unused block groups. This has two consequences: 1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items; 2) We don't increment the reference count on the block group when we move it to the list of unused block groups, because we assumed the block group was on the list of block groups to reclaim, and in that case it already has the correct reference count. However the block group was on the list of new block groups, in which case no extra reference was taken because it's local to the current task. This later results in doing an extra reference count decrement when removing the block group from the unused list, eventually leading the reference count to 0. This second case was caught when running generic/297 from fstests, which produced the following assertion failure and stack trace: [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299 [589.559] ------------[ cut here ]------------ [589.559] kernel BUG at fs/btrfs/block-group.c:4299! [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.561] Code: 68 62 da c0 (...) [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246 [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000 [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50 [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00 [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100 [589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000 [589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0 [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [589.564] Call Trace: [589.564] <TASK> [589.565] ? __die_body+0x1b/0x60 [589.565] ? die+0x39/0x60 [589.565] ? do_trap+0xeb/0x110 [589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? do_error_trap+0x6a/0x90 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? exc_invalid_op+0x4e/0x70 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? asm_exc_invalid_op+0x16/0x20 [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] close_ctree+0x35d/0x560 [btrfs] [589.568] ? fsnotify_sb_delete+0x13e/0x1d0 [589.568] ? dispose_list+0x3a/0x50 [589.568] ? evict_inodes+0x151/0x1a0 [589.568] generic_shutdown_super+0x73/0x1a0 [589.569] kill_anon_super+0x14/0x30 [589.569] btrfs_kill_super+0x12/0x20 [btrfs] [589.569] deactivate_locked ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: caif: Fix use-after-free in cfusbl_device_notify() syzbot reported use-after-free in cfusbl_device_notify() [1]. This causes a stack trace like below: BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214 CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10227 [inline] netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> When unregistering a net device, unregister_netdevice_many_notify() sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers with NETDEV_UNREGISTER, and adds the device to the todo list. Later on, devices in the todo list are processed by netdev_run_todo(). netdev_run_todo() waits devices' reference count become 1 while rebdoadcasting NETDEV_UNREGISTER notification. When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple times, the parent device might be freed. This could cause UAF. Processing NETDEV_UNREGISTER multiple times also causes inbalance of reference count for the module. This patch fixes the issue by accepting only first NETDEV_UNREGISTER notification.

In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas_flash: allow user copy to flash block cache objects With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the /proc/powerpc/rtas/firmware_update interface to prepare a system firmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4 The blocks of the firmware image are copied directly from user memory to objects allocated from flash_block_cache, so flash_block_cache must be created using kmem_cache_create_usercopy() to mark it safe for user access. [mpe: Trim and indent oops]

In the Linux kernel, the following vulnerability has been resolved: clk: microchip: fix potential UAF in auxdev release callback Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in adev_release()"), the auxiliary device is not torn down in the correct order. If auxiliary_device_add() fails, the release callback will be called twice, resulting in a UAF. Due to timing, the auxdev code in this driver "took inspiration" from the aforementioned commit, and thus its bugs too! Moving auxiliary_device_uninit() to the unregister callback instead avoids the issue.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check S1G action frame size Before checking the action code, check that it even exists in the frame.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not ignore genmask when looking up chain by id When adding a rule to a chain referring to its ID, if that chain had been deleted on the same batch, the rule might end up referring to a deleted chain. This will lead to a WARNING like following: [ 33.098431] ------------[ cut here ]------------ [ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260 [ 33.099217] Modules linked in: [ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409 [ 33.099726] Workqueue: events nf_tables_trans_destroy_work [ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260 [ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 [ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202 [ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000 [ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000 [ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500 [ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10 [ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000 [ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0 [ 33.104872] PKRU: 55555554 [ 33.104999] Call Trace: [ 33.105113] <TASK> [ 33.105214] ? show_regs+0x72/0x90 [ 33.105371] ? __warn+0xa5/0x210 [ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.105732] ? report_bug+0x1f2/0x200 [ 33.105902] ? handle_bug+0x46/0x90 [ 33.106546] ? exc_invalid_op+0x19/0x50 [ 33.106762] ? asm_exc_invalid_op+0x1b/0x20 [ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.107249] ? nf_tables_chain_destroy+0x30/0x260 [ 33.107506] nf_tables_trans_destroy_work+0x669/0x680 [ 33.107782] ? mark_held_locks+0x28/0xa0 [ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70 [ 33.108538] process_one_work+0x68c/0xb70 [ 33.108755] ? lock_acquire+0x17f/0x420 [ 33.108977] ? __pfx_process_one_work+0x10/0x10 [ 33.109218] ? do_raw_spin_lock+0x128/0x1d0 [ 33.109435] ? _raw_spin_lock_irq+0x71/0x80 [ 33.109634] worker_thread+0x2bd/0x700 [ 33.109817] ? __pfx_worker_thread+0x10/0x10 [ 33.110254] kthread+0x18b/0x1d0 [ 33.110410] ? __pfx_kthread+0x10/0x10 [ 33.110581] ret_from_fork+0x29/0x50 [ 33.110757] </TASK> [ 33.110866] irq event stamp: 1651 [ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0 [ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0 [ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112453] ---[ end trace 0000000000000000 ]--- This is due to the nft_chain_lookup_byid ignoring the genmask. After this change, adding the new rule will fail as it will not find the chain.

In the Linux kernel, the following vulnerability has been resolved: cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex syzbot is reporting circular locking dependency between cpu_hotplug_lock and freezer_mutex, for commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") replaced atomic_inc() in freezer_apply_state() with static_branch_inc() which holds cpu_hotplug_lock. cpu_hotplug_lock => cgroup_threadgroup_rwsem => freezer_mutex cgroup_file_write() { cgroup_procs_write() { __cgroup_procs_write() { cgroup_procs_write_start() { cgroup_attach_lock() { cpus_read_lock() { percpu_down_read(&cpu_hotplug_lock); } percpu_down_write(&cgroup_threadgroup_rwsem); } } cgroup_attach_task() { cgroup_migrate() { cgroup_migrate_execute() { freezer_attach() { mutex_lock(&freezer_mutex); (...snipped...) } } } } (...snipped...) } } } freezer_mutex => cpu_hotplug_lock cgroup_file_write() { freezer_write() { freezer_change_state() { mutex_lock(&freezer_mutex); freezer_apply_state() { static_branch_inc(&freezer_active) { static_key_slow_inc() { cpus_read_lock(); static_key_slow_inc_cpuslocked(); cpus_read_unlock(); } } } mutex_unlock(&freezer_mutex); } } } Swap locking order by moving cpus_read_lock() in freezer_apply_state() to before mutex_lock(&freezer_mutex) in freezer_change_state().

In the Linux kernel, the following vulnerability has been resolved: lwt: Fix return values of BPF xmit ops BPF encap ops can return different types of positive values, such like NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in ip(6)_finish_output2. When this happens, skbs that have been freed would continue to the neighbor subsystem, causing use-after-free bug and kernel crashes. To fix the incorrect behavior, skb_do_redirect return values can be simply discarded, the same as tc-egress behavior. On the other hand, bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU information. Thus convert its return values to avoid the conflict with LWTUNNEL_XMIT_CONTINUE.

In the Linux kernel, the following vulnerability has been resolved: drm/tests: helpers: Avoid a driver uaf when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x7 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext() The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.