In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free in do_zone_finish() Shinichiro reported the following use-after-free triggered by the device replace operation in fstests btrfs/070. BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0 ================================================================== BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs] Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007 CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0x200/0x3e0 kasan_report+0xd8/0x110 ? do_zone_finish+0x91a/0xb90 [btrfs] ? do_zone_finish+0x91a/0xb90 [btrfs] do_zone_finish+0x91a/0xb90 [btrfs] btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs] ? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs] ? btrfs_put_root+0x2d/0x220 [btrfs] ? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs] cleaner_kthread+0x21e/0x380 [btrfs] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs] kthread+0x2e3/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 3493983: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_alloc_device+0xb3/0x4e0 [btrfs] device_list_add.constprop.0+0x993/0x1630 [btrfs] btrfs_scan_one_device+0x219/0x3d0 [btrfs] btrfs_control_ioctl+0x26e/0x310 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 3494056: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3f/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x32/0x70 kfree+0x11b/0x320 btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs] btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs] btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs] btrfs_ioctl+0xb27/0x57d0 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 The buggy address belongs to the object at ffff8881543c8000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 96 bytes inside of freed 1024-byte region [ffff8881543c8000, ffff8881543c8400) The buggy address belongs to the physical page: page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8 head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb This UAF happens because we're accessing stale zone information of a already removed btrfs_device in do_zone_finish(). The sequence of events is as follows: btrfs_dev_replace_start btrfs_scrub_dev btrfs_dev_replace_finishing btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced btrfs_rm_dev_replace_free_srcdev btrfs_free_device <-- device freed cleaner_kthread btrfs_delete_unused_bgs btrfs_zone_finish do_zone_finish <-- refers the freed device The reason for this is that we're using a ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests to submit, we process them and send them off, and then in the completion path for the commit requests we have if (nfs_commit_end(cinfo.mds)) nfs_direct_write_complete(dreq); However since we're submitting asynchronous requests we sometimes have one that completes before we submit the next one, so we end up calling complete on the nfs_direct_request twice. The only other place we use nfs_generic_commit_list() is in __nfs_commit_inode, which wraps this call in a nfs_commit_begin(); nfs_commit_end(); Which is a common pattern for this style of completion handling, one that is also repeated in the direct code with get_dreq()/put_dreq() calls around where we process events as well as in the completion paths. Fix this by using the same pattern for the commit requests. Before with my 200 node rocksdb stress running this warning would pop every 10ish minutes. With my patch the stress test has been running for several hours without popping.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925e: fix use-after-free in free_irq() From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test to make sure the shared irq handler should be able to handle the unexpected event after deregistration. For this case, let's apply MT76_REMOVED flag to indicate the device was removed and do not run into the resource access anymore.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not compare internal table flags on updates Restore skipping transaction if table update does not modify flags.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix use-after-free in free_irq() From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test to make sure the shared irq handler should be able to handle the unexpected event after deregistration. For this case, let's apply MT76_REMOVED flag to indicate the device was removed and do not run into the resource access anymore. BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e] Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115 CPU: 28 PID: 11115 Comm: rmmod Tainted: G W L 5.17.0 #10 Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x1f/0x190 ? mt7921_irq_handler+0xd8/0x100 [mt7921e] ? mt7921_irq_handler+0xd8/0x100 [mt7921e] kasan_report.cold+0x7f/0x11b ? mt7921_irq_handler+0xd8/0x100 [mt7921e] mt7921_irq_handler+0xd8/0x100 [mt7921e] free_irq+0x627/0xaa0 devm_free_irq+0x94/0xd0 ? devm_request_any_context_irq+0x160/0x160 ? kobject_put+0x18d/0x4a0 mt7921_pci_remove+0x153/0x190 [mt7921e] pci_device_remove+0xa2/0x1d0 __device_release_driver+0x346/0x6e0 driver_detach+0x1ef/0x2c0 bus_remove_driver+0xe7/0x2d0 ? __check_object_size+0x57/0x310 pci_unregister_driver+0x26/0x250 __do_sys_delete_module+0x307/0x510 ? free_module+0x6a0/0x6a0 ? fpregs_assert_state_consistent+0x4b/0xb0 ? rcu_read_lock_sched_held+0x10/0x70 ? syscall_enter_from_user_mode+0x20/0x70 ? trace_hardirqs_on+0x1c/0x130 do_syscall_64+0x5c/0x80 ? trace_hardirqs_on_prepare+0x72/0x160 ? do_syscall_64+0x68/0x80 ? trace_hardirqs_on_prepare+0x72/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xae

/bin/login in shadow 4.0.18.1 in Debian GNU/Linux, and probably other Linux distributions, allows local users in the utmp group to overwrite arbitrary files via a symlink attack on a temporary file referenced in a line (aka ut_line) field in a utmp entry.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent kernel bug at submit_bh_wbc() Fix a bug where nilfs_get_block() returns a successful status when searching and inserting the specified block both fail inconsistently. If this inconsistent behavior is not due to a previously fixed bug, then an unexpected race is occurring, so return a temporary error -EAGAIN instead. This prevents callers such as __block_write_begin_int() from requesting a read into a buffer that is not mapped, which would cause the BUG_ON check for the BH_Mapped flag in submit_bh_wbc() to fail.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potencial out-of-bounds when buffer offset is invalid I found potencial out-of-bounds when buffer offset fields of a few requests is invalid. This patch set the minimum value of buffer offset field to ->Buffer offset to validate buffer length.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix double free of the ha->vp_map pointer Coverity scan reported potential risk of double free of the pointer ha->vp_map. ha->vp_map was freed in qla2x00_mem_alloc(), and again freed in function qla2x00_mem_free(ha). Assign NULL to vp_map and kfree take care of NULL.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix Use-After-Free in ovs_ct_exit Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stackmap overflow check on 32-bit arches The stackmap code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. The commit in the fixes tag actually attempted to fix this, but the fix did not account for the UB, so the fix only works on CPUs where an overflow does result in a neat truncation to zero, which is not guaranteed. Checking the value before rounding does not have this problem.

In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Fix level3 translation fault in swsusp_save() On arm64 machines, swsusp_save() faults if it attempts to access MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n: Unable to handle kernel paging request at virtual address ffffff8000000000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000 [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76 Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0 Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021 pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : swsusp_save+0x280/0x538 lr : swsusp_save+0x280/0x538 sp : ffffffa034a3fa40 x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000 x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000 x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2 x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000 x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666 x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0 x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001 x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e Call trace: swsusp_save+0x280/0x538 swsusp_arch_suspend+0x148/0x190 hibernation_snapshot+0x240/0x39c hibernate+0xc4/0x378 state_store+0xf0/0x10c kobj_attr_store+0x14/0x24 The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable() -> kernel_page_present() assuming that a page is always present when can_set_direct_map() is false (all of rodata_full, debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false), irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions should not be saved during hibernation. This problem was introduced by changes to the pfn_valid() logic in commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()"). Similar to other architectures, drop the !can_set_direct_map() check in kernel_page_present() so that page_is_savable() skips such pages. [catalin.marinas@arm.com: rework commit message]

A certain Debian patch to the run scripts for sabre (aka xsabre) 0.2.4b allows local users to delete or overwrite arbitrary files via a symlink attack on unspecified .tmp files.

In the Linux kernel, the following vulnerability has been resolved: media: edia: dvbdev: fix a use-after-free In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed in several error-handling paths. However, *pdvbdev is not set to NULL after dvbdev's deallocation, causing use-after-frees in many places, for example, in the following call chain: budget_register |-> dvb_dmxdev_init |-> dvb_register_device |-> dvb_dmxdev_release |-> dvb_unregister_device |-> dvb_remove_device |-> dvb_device_put |-> kref_put When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in dvb_register_device) could point to memory that had been freed in dvb_register_device. Thereafter, this pointer is transferred to kref_put and triggering a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix DEVMAP_HASH overflow check on 32-bit arches The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation.

In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")

In the Linux kernel, the following vulnerability has been resolved: nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse() When nvme_identify_ns() fails, it frees the pointer to the struct nvme_id_ns before it returns. However, ns_update_nuse() calls kfree() for the pointer even when nvme_identify_ns() fails. This results in KASAN double-free, which was observed with blktests nvme/045 with proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by skipping kfree() when nvme_identify_ns() fails.

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem.

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix memory double free when handle zero packet 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver.

In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in usb_deauthorize_interface() Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device: It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback. Reported-and-tested by: Yue Sun <samsun1006219@gmail.com> Reported by: xingwei lee <xrivendell7@gmail.com>

In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix llsec key resources release in mac802154_llsec_key_del mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t: addition on 0; use-after-free. WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0 Modules linked in: CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x162/0x2a0 Call Trace: <TASK> llsec_lookup_key.isra.0+0x890/0x9e0 mac802154_llsec_encrypt+0x30c/0x9c0 ieee802154_subif_start_xmit+0x24/0x1e0 dev_hard_start_xmit+0x13e/0x690 sch_direct_xmit+0x2ae/0xbc0 __dev_queue_xmit+0x11dd/0x3c20 dgram_sendmsg+0x90b/0xd60 __sys_sendto+0x466/0x4c0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x45/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Also, ieee802154_llsec_key_entry structures are not freed by mac802154_llsec_key_del(): unreferenced object 0xffff8880613b6980 (size 64): comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s) hex dump (first 32 bytes): 78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de x......."....... 00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00 ................ backtrace: [<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0 [<ffffffff81c43865>] kmalloc_trace+0x25/0xc0 [<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0 [<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80 [<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0 [<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0 [<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0 [<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440 [<ffffffff86ff1d88>] genl_rcv+0x28/0x40 [<ffffffff86fec15c>] netlink_unicast+0x53c/0x820 [<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60 [<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0 [<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0 [<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0 [<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0 [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Handle the proper resource release in the RCU callback function mac802154_llsec_key_del_rcu(). Note that if llsec_lookup_key() finds a key, it gets a refcount via llsec_key_get() and locally copies key id from key_entry (which is a list element). So it's safe to call llsec_key_put() and free the list entry after the RCU grace period elapses. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix failure to detect DAT corruption in btree and direct mappings Patch series "nilfs2: fix kernel bug at submit_bh_wbc()". This resolves a kernel BUG reported by syzbot. Since there are two flaws involved, I've made each one a separate patch. The first patch alone resolves the syzbot-reported bug, but I think both fixes should be sent to stable, so I've tagged them as such. This patch (of 2): Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data to a nilfs2 file system whose metadata is corrupted. There are two flaws involved in this issue. The first flaw is that when nilfs_get_block() locates a data block using btree or direct mapping, if the disk address translation routine nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata corruption, it can be passed back to nilfs_get_block(). This causes nilfs_get_block() to misidentify an existing block as non-existent, causing both data block lookup and insertion to fail inconsistently. The second flaw is that nilfs_get_block() returns a successful status in this inconsistent state. This causes the caller __block_write_begin_int() or others to request a read even though the buffer is not mapped, resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc() failing. This fixes the first issue by changing the return value to code -EINVAL when a conversion using DAT fails with code -ENOENT, avoiding the conflicting condition that leads to the kernel bug described above. Here, code -EINVAL indicates that metadata corruption was detected during the block lookup, which will be properly handled as a file system error and converted to -EIO when passing through the nilfs2 bmap layer.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent potential buffer overflow in map_hw_resources Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7

In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts This patch is against CVE-2023-6270. The description of cve is: A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial code is finished. But the net_device ifp will still be used in later tx()->dev_queue_xmit() in kthread. Which means that the dev_put(ifp) should NOT be called in the success path of skb initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into use-after-free because the net_device is freed. This patch removed the dev_put(ifp) in the success path in aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().

In the Linux kernel, the following vulnerability has been resolved: net/ipv6: avoid possible UAF in ip6_route_mpath_notify() syzbot found another use-after-free in ip6_route_mpath_notify() [1] Commit f7225172f25a ("net/ipv6: prevent use after free in ip6_route_mpath_notify") was not able to fix the root cause. We need to defer the fib6_info_release() calls after ip6_route_mpath_notify(), in the cleanup phase. [1] BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0 Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037 CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfaa588 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x167/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x180 mm/kasan/report.c:601 rt6_fill_node+0x1460/0x1ac0 inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184 ip6_route_mpath_notify net/ipv6/route.c:5198 [inline] ip6_route_multipath_add net/ipv6/route.c:5404 [inline] inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f73dd87dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858 </TASK> Allocated by task 23037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:372 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3981 [inline] __kmalloc+0x22e/0x490 mm/slub.c:3994 kmalloc include/linux/slab.h:594 [inline] kzalloc include/linux/slab.h:711 [inline] fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155 ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758 ip6_route_multipath_add net/ipv6/route.c:5298 [inline] inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Freed by task 16: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640 poison_slab_object+0xa6/0xe0 m ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix use-after-free in CCMP/GCMP RX When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401.

In the Linux kernel, the following vulnerability has been resolved: afs: Increase buffer size in afs_update_volume_status() The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]

In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_newlink() The gtp_link_ops operations structure for the subsystem must be registered after registering the gtp_net_ops pernet operations structure. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: [ 1010.702740] gtp: GTP module unloaded [ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI [ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1 [ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 [ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00 [ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203 [ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000 [ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282 [ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000 [ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80 [ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400 [ 1010.715953] FS: 00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000 [ 1010.715958] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0 [ 1010.715968] PKRU: 55555554 [ 1010.715972] Call Trace: [ 1010.715985] ? __die_body.cold+0x1a/0x1f [ 1010.715995] ? die_addr+0x43/0x70 [ 1010.716002] ? exc_general_protection+0x199/0x2f0 [ 1010.716016] ? asm_exc_general_protection+0x1e/0x30 [ 1010.716026] ? gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.716034] ? gtp_net_exit+0x150/0x150 [gtp] [ 1010.716042] __rtnl_newlink+0x1063/0x1700 [ 1010.716051] ? rtnl_setlink+0x3c0/0x3c0 [ 1010.716063] ? is_bpf_text_address+0xc0/0x1f0 [ 1010.716070] ? kernel_text_address.part.0+0xbb/0xd0 [ 1010.716076] ? __kernel_text_address+0x56/0xa0 [ 1010.716084] ? unwind_get_return_address+0x5a/0xa0 [ 1010.716091] ? create_prof_cpu_mask+0x30/0x30 [ 1010.716098] ? arch_stack_walk+0x9e/0xf0 [ 1010.716106] ? stack_trace_save+0x91/0xd0 [ 1010.716113] ? stack_trace_consume_entry+0x170/0x170 [ 1010.716121] ? __lock_acquire+0x15c5/0x5380 [ 1010.716139] ? mark_held_locks+0x9e/0xe0 [ 1010.716148] ? kmem_cache_alloc_trace+0x35f/0x3c0 [ 1010.716155] ? __rtnl_newlink+0x1700/0x1700 [ 1010.716160] rtnl_newlink+0x69/0xa0 [ 1010.716166] rtnetlink_rcv_msg+0x43b/0xc50 [ 1010.716172] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716179] ? lock_acquire+0x1fe/0x560 [ 1010.716188] ? netlink_deliver_tap+0x12f/0xd50 [ 1010.716196] netlink_rcv_skb+0x14d/0x440 [ 1010.716202] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716208] ? netlink_ack+0xab0/0xab0 [ 1010.716213] ? netlink_deliver_tap+0x202/0xd50 [ 1010.716220] ? netlink_deliver_tap+0x218/0xd50 [ 1010.716226] ? __virt_addr_valid+0x30b/0x590 [ 1010.716233] netlink_unicast+0x54b/0x800 [ 1010.716240] ? netlink_attachskb+0x870/0x870 [ 1010.716248] ? __check_object_size+0x2de/0x3b0 [ 1010.716254] netlink_sendmsg+0x938/0xe40 [ 1010.716261] ? netlink_unicast+0x800/0x800 [ 1010.716269] ? __import_iovec+0x292/0x510 [ 1010.716276] ? netlink_unicast+0x800/0x800 [ 1010.716284] __sock_sendmsg+0x159/0x190 [ 1010.716290] ____sys_sendmsg+0x712/0x880 [ 1010.716297] ? sock_write_iter+0x3d0/0x3d0 [ 1010.716304] ? __ia32_sys_recvmmsg+0x270/0x270 [ 1010.716309] ? lock_acquire+0x1fe/0x560 [ 1010.716315] ? drain_array_locked+0x90/0x90 [ 1010.716324] ___sys_sendmsg+0xf8/0x170 [ 1010.716331] ? sendmsg_copy_msghdr+0x170/0x170 [ 1010.716337] ? lockdep_init_map ---truncated---

In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce - Fix use after free in unprepare sun8i_ce_cipher_unprepare should be called before crypto_finalize_skcipher_request, because client callbacks may immediately free memory, that isn't needed anymore. But it will be used by unprepare after free. Before removing prepare/unprepare callbacks it was handled by crypto engine in crypto_finalize_request. Usually that results in a pointer dereference problem during a in crypto selftest. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000 [0000000000000030] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP This problem is detected by KASAN as well. ================================================================== BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373 Hardware name: Pine64 PinePhone (1.2) (DT) Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_load8+0x9c/0xc0 sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] crypto_pump_work+0x354/0x620 [crypto_engine] kthread_worker_fn+0x244/0x498 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x38 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x74/0x1d0 alg_test_skcipher+0x90/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Freed by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x60 __kasan_slab_free+0x100/0x170 slab_free_freelist_hook+0xd4/0x1e8 __kmem_cache_free+0x15c/0x290 kfree+0x74/0x100 kfree_sensitive+0x80/0xb0 alg_test_skcipher+0x12c/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 The buggy address belongs to the object at ffff00000dcdc000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100)

In the Linux kernel, the following vulnerability has been resolved: dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails When loading a device-mapper table for a request-based mapped device, and the allocation/initialization of the blk_mq_tag_set for the device fails, a following device remove will cause a double free. E.g. (dmesg): device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device device-mapper: ioctl: unable to set up device queue for new table. Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0305e098835de000 TEID: 0305e098835de803 Fault in home space mode while using kernel ASCE. AS:000000025efe0007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... lots of modules ... Supported: Yes, External CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3 Hardware name: IBM 8561 T01 7I2 (LPAR) Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000 000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000 000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640 00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8 Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8 000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58 #000000025e368ec4: e3b010000008 ag %r11,0(%r1) >000000025e368eca: e310b0080004 lg %r1,8(%r11) 000000025e368ed0: a7110001 tmll %r1,1 000000025e368ed4: a7740129 brc 7,25e369126 000000025e368ed8: e320b0080004 lg %r2,8(%r11) 000000025e368ede: b904001b lgr %r1,%r11 Call Trace: [<000000025e368eca>] kfree+0x42/0x330 [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8 [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod] [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod] [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod] [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod] [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod] [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod] [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0 [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40 [<000000025e8c15ac>] system_call+0xd8/0x2c8 Last Breaking-Event-Address: [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops When allocation/initialization of the blk_mq_tag_set fails in dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer is not reset to NULL; so when dev_remove() later gets into dm_mq_cleanup_mapped_device() it sees the pointer and tries to uninitialize and free it again. Fix this by setting the pointer to NULL in dm_mq_init_request_queue() error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free of anonymous device after snapshot creation failure When creating a snapshot we may do a double free of an anonymous device in case there's an error committing the transaction. The second free may result in freeing an anonymous device number that was allocated by some other subsystem in the kernel or another btrfs filesystem. The steps that lead to this: 1) At ioctl.c:create_snapshot() we allocate an anonymous device number and assign it to pending_snapshot->anon_dev; 2) Then we call btrfs_commit_transaction() and end up at transaction.c:create_pending_snapshot(); 3) There we call btrfs_get_new_fs_root() and pass it the anonymous device number stored in pending_snapshot->anon_dev; 4) btrfs_get_new_fs_root() frees that anonymous device number because btrfs_lookup_fs_root() returned a root - someone else did a lookup of the new root already, which could some task doing backref walking; 5) After that some error happens in the transaction commit path, and at ioctl.c:create_snapshot() we jump to the 'fail' label, and after that we free again the same anonymous device number, which in the meanwhile may have been reallocated somewhere else, because pending_snapshot->anon_dev still has the same value as in step 1. Recently syzbot ran into this and reported the following trace: ------------[ cut here ]------------ ida_free called for id=51 which is not allocated. WARNING: CPU: 1 PID: 31038 at lib/idr.c:525 ida_free+0x370/0x420 lib/idr.c:525 Modules linked in: CPU: 1 PID: 31038 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00410-gc02197fc9076 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:ida_free+0x370/0x420 lib/idr.c:525 Code: 10 42 80 3c 28 (...) RSP: 0018:ffffc90015a67300 EFLAGS: 00010246 RAX: be5130472f5dd000 RBX: 0000000000000033 RCX: 0000000000040000 RDX: ffffc90009a7a000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: ffffc90015a673f0 R08: ffffffff81577992 R09: 1ffff92002b4cdb4 R10: dffffc0000000000 R11: fffff52002b4cdb5 R12: 0000000000000246 R13: dffffc0000000000 R14: ffffffff8e256b80 R15: 0000000000000246 FS: 00007fca3f4b46c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f167a17b978 CR3: 000000001ed26000 CR4: 0000000000350ef0 Call Trace: <TASK> btrfs_get_root_ref+0xa48/0xaf0 fs/btrfs/disk-io.c:1346 create_pending_snapshot+0xff2/0x2bc0 fs/btrfs/transaction.c:1837 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1931 btrfs_commit_transaction+0xf1c/0x3740 fs/btrfs/transaction.c:2404 create_snapshot+0x507/0x880 fs/btrfs/ioctl.c:848 btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:998 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1044 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1306 btrfs_ioctl_snap_create_v2+0x1ca/0x400 fs/btrfs/ioctl.c:1393 btrfs_ioctl+0xa74/0xd40 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xfe/0x170 fs/ioctl.c:857 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fca3e67dda9 Code: 28 00 00 00 (...) RSP: 002b:00007fca3f4b40c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fca3e7abf80 RCX: 00007fca3e67dda9 RDX: 00000000200005c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fca3e6ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fca3e7abf80 R15: 00007fff6bf95658 </TASK> Where we get an explicit message where we attempt to free an anonymous device number that is not currently allocated. It happens in a different code path from the example below, at btrfs_get_root_ref(), so this change may not fix the case triggered by sy ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces wilc_netdev_cleanup currently triggers a KASAN warning, which can be observed on interface registration error path, or simply by removing the module/unbinding device from driver: echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind ================================================================== BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc Read of size 4 at addr c54d1ce8 by task sh/86 CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x58 dump_stack_lvl from print_report+0x154/0x500 print_report from kasan_report+0xac/0xd8 kasan_report from wilc_netdev_cleanup+0x508/0x5cc wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec wilc_bus_remove from spi_remove+0x8c/0xac spi_remove from device_release_driver_internal+0x434/0x5f8 device_release_driver_internal from unbind_store+0xbc/0x108 unbind_store from kernfs_fop_write_iter+0x398/0x584 kernfs_fop_write_iter from vfs_write+0x728/0xf88 vfs_write from ksys_write+0x110/0x1e4 ksys_write from ret_fast_syscall+0x0/0x1c [...] Allocated by task 1: kasan_save_track+0x30/0x5c __kasan_kmalloc+0x8c/0x94 __kmalloc_node+0x1cc/0x3e4 kvmalloc_node+0x48/0x180 alloc_netdev_mqs+0x68/0x11dc alloc_etherdev_mqs+0x28/0x34 wilc_netdev_ifc_init+0x34/0x8ec wilc_cfg80211_init+0x690/0x910 wilc_bus_probe+0xe0/0x4a0 spi_probe+0x158/0x1b0 really_probe+0x270/0xdf4 __driver_probe_device+0x1dc/0x580 driver_probe_device+0x60/0x140 __driver_attach+0x228/0x5d4 bus_for_each_dev+0x13c/0x1a8 bus_add_driver+0x2a0/0x608 driver_register+0x24c/0x578 do_one_initcall+0x180/0x310 kernel_init_freeable+0x424/0x484 kernel_init+0x20/0x148 ret_from_fork+0x14/0x28 Freed by task 86: kasan_save_track+0x30/0x5c kasan_save_free_info+0x38/0x58 __kasan_slab_free+0xe4/0x140 kfree+0xb0/0x238 device_release+0xc0/0x2a8 kobject_put+0x1d4/0x46c netdev_run_todo+0x8fc/0x11d0 wilc_netdev_cleanup+0x1e4/0x5cc wilc_bus_remove+0xc8/0xec spi_remove+0x8c/0xac device_release_driver_internal+0x434/0x5f8 unbind_store+0xbc/0x108 kernfs_fop_write_iter+0x398/0x584 vfs_write+0x728/0xf88 ksys_write+0x110/0x1e4 ret_fast_syscall+0x0/0x1c [...] David Mosberger-Tan initial investigation [1] showed that this use-after-free is due to netdevice unregistration during vif list traversal. When unregistering a net device, since the needs_free_netdev has been set to true during registration, the netdevice object is also freed, and as a consequence, the corresponding vif object too, since it is attached to it as private netdevice data. The next occurrence of the loop then tries to access freed vif pointer to the list to move forward in the list. Fix this use-after-free thanks to two mechanisms: - navigate in the list with list_for_each_entry_safe, which allows to safely modify the list as we go through each element. For each element, remove it from the list with list_del_rcu - make sure to wait for RCU grace period end after each vif removal to make sure it is safe to free the corresponding vif too (through unregister_netdev) Since we are in a RCU "modifier" path (not a "reader" path), and because such path is expected not to be concurrent to any other modifier (we are using the vif_mutex lock), we do not need to use RCU list API, that's why we can benefit from list_for_each_entry_safe. [1] https://lore.kernel.org/linux-wireless/ab077dbe58b1ea5de0a3b2ca21f275a07af967d2.camel@egauge.net/

In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix set_fmt error handling If there in an error during a set_fmt, do not overwrite the previous sizes with the invalid config. Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and causing the following OOPs [ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes) [ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0 [ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited".

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF issue in ksmbd_tcp_new_connection() The race is between the handling of a new TCP connection and its disconnection. It leads to UAF on `struct tcp_transport` in ksmbd_tcp_new_connection() function.

In the Linux kernel, the following vulnerability has been resolved: regmap: Fix possible double-free in regcache_rbtree_exit() In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails.

In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix flipped sign in tls_err_abort() calls sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once.

In the Linux kernel, the following vulnerability has been resolved: net: tls: fix use-after-free with partial reads and async decrypt tls_decrypt_sg doesn't take a reference on the pages from clear_skb, so the put_page() in tls_decrypt_done releases them, and we trigger a use-after-free in process_rx_list when we try to read from the partially-read skb.

The LDT implementation in the Linux kernel 2.6.25.x before 2.6.25.11 on x86_64 platforms uses an incorrect size for ldt_desc, which allows local users to cause a denial of service (system crash) or possibly gain privileges via unspecified vectors.

In the Linux kernel, the following vulnerability has been resolved: mcb: fix error handling in mcb_alloc_bus() There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix use-after-free due to delegation race A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru. Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread. I suspect aba2072f4523 "nfsd: grant read delegations to clients holding writes" made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning.

In the Linux kernel, the following vulnerability has been resolved: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used.

In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix txrate reporting Properly check rate_info to fix unexpected reporting. [ 1215.161863] Call trace: [ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211] [ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211] [ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211] [ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e] [ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e] [ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e] [ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76] [ 1215.201276] __napi_poll+0x38/0xf8 [ 1215.204668] napi_workfn+0x40/0x80 [ 1215.208062] process_one_work+0x1fc/0x390 [ 1215.212062] worker_thread+0x48/0x4d0 [ 1215.215715] kthread+0x120/0x128 [ 1215.218935] ret_from_fork+0x10/0x1c

In the Linux kernel, the following vulnerability has been resolved: llc: call sock_orphan() at release time syzbot reported an interesting trace [1] caused by a stale sk->sk_wq pointer in a closed llc socket. In commit ff7b11aa481f ("net: socket: set sock->sk to NULL after calling proto_ops::release()") Eric Biggers hinted that some protocols are missing a sock_orphan(), we need to perform a full audit. In net-next, I plan to clear sock->sk from sock_orphan() and amend Eric patch to add a warning. [1] BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline] BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline] BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline] BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27 CPU: 1 PID: 27 Comm: ksoftirqd/1 Not tainted 6.8.0-rc1-syzkaller-00049-g6098d87eaf31 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 list_empty include/linux/list.h:373 [inline] waitqueue_active include/linux/wait.h:127 [inline] sock_def_write_space_wfree net/core/sock.c:3384 [inline] sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 skb_release_head_state+0xa3/0x2b0 net/core/skbuff.c:1080 skb_release_all net/core/skbuff.c:1092 [inline] napi_consume_skb+0x119/0x2b0 net/core/skbuff.c:1404 e1000_unmap_and_free_tx_resource+0x144/0x200 drivers/net/ethernet/intel/e1000/e1000_main.c:1970 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3860 [inline] e1000_clean+0x4a1/0x26e0 drivers/net/ethernet/intel/e1000/e1000_main.c:3801 __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x956/0xe90 net/core/dev.c:6778 __do_softirq+0x21a/0x8de kernel/softirq.c:553 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x31/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x660/0xa10 kernel/smpboot.c:164 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 </TASK> Allocated by task 5167: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_lru+0x142/0x6f0 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3019 [inline] sock_alloc_inode+0x25/0x1c0 net/socket.c:308 alloc_inode+0x5d/0x220 fs/inode.c:260 new_inode_pseudo+0x16/0x80 fs/inode.c:1005 sock_alloc+0x40/0x270 net/socket.c:634 __sock_create+0xbc/0x800 net/socket.c:1535 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x14c/0x260 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1718 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 0: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x121/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inlin ---truncated---