Buffer overflow in Firewall Authentication Proxy for FTP and/or Telnet Sessions for Cisco IOS 12.2ZH and 12.2ZL, 12.3 and 12.3T, and 12.4 and 12.4T allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted user authentication credentials.

Cisco switches and routers running IOS 12.1 and earlier produce predictable TCP Initial Sequence Numbers (ISNs), which allows remote attackers to spoof or hijack TCP connections.

Cisco Clean Access (CCA) 3.3.0 to 3.3.9, 3.4.0 to 3.4.5, and 3.5.0 to 3.5.3 does not properly authenticate users when invoking API methods, which could allow remote attackers to bypass security checks, change the assigned role of a user, or disconnect users.

By design, the "established" command on the Cisco PIX firewall allows connections from one host to arbitrary ports of a target host if an alternative conduit has already been allowed, which can cause administrators to configure less restrictive access controls than intended if they do not understand this functionality.

Cisco IOS XR on ASR 9000 devices does not properly use compression for port-range and address-range encoding, which allows remote attackers to bypass intended Typhoon line-card ACL restrictions via transit traffic, aka Bug ID CSCup30133.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

SQL injection vulnerability in the Enterprise Mobility Application (EMApp) interface in Cisco Unified Communications Manager (UCM) allows remote attackers to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCum05302.

SQL injection vulnerability in the IP Manager Assistant (IPMA) interface in Cisco Unified Communications Manager (UCM) 10.0(1) and earlier allows remote attackers to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCum05326.

Cisco switches that support 802.1x security allow remote attackers to bypass port security and gain access to the VLAN via spoofed Cisco Discovery Protocol (CDP) messages.

SQL injection vulnerability in the CallManager Interactive Voice Response (CMIVR) interface in Cisco Unified Communications Manager (UCM) allows remote attackers to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCum05318.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.

A vulnerability in the Virtual Network Computing (VNC) console implementation of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to access the VNC console session of an administrative user on an affected device. The vulnerability is due to an insufficient authentication mechanism used to establish a VNC session. An attacker could exploit this vulnerability by intercepting an administrator VNC session request prior to login. A successful exploit could allow the attacker to watch the administrator console session or interact with it, allowing admin access to the affected device.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Application Services Engine could allow an unauthenticated, remote attacker to gain privileged access to host-level operations or to learn device-specific information, create diagnostic files, and make limited configuration changes. For more information about these vulnerabilities, see the Details section of this advisory.

SQL injection vulnerability in Cisco Unified Communications Manager (CUCM) 7.1(x) through 9.1(1a) allows remote attackers to execute arbitrary SQL commands via unspecified vectors, leading to discovery of encrypted credentials by leveraging metadata, aka Bug ID CSCuh01051.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.

Cisco IOS 12.2T, 12.3 and 12.3T, when processing an ISAKMP profile that specifies XAUTH authentication after Phase 1 negotiation, may not process certain attributes in the ISAKMP profile that specifies XAUTH, which allows remote attackers to bypass XAUTH and move to Phase 2 negotiations.

Cisco Linksys E4200 1.0.05 Build 7 devices contain a Security Bypass Vulnerability which could allow remote attackers to gain unauthorized access.

Unknown vulnerability in Cisco Firewall Services Module (FWSM) 2.3.1 and earlier, when using URL, FTP, or HTTPS filtering exceptions, allows certain TCP packets to bypass access control lists (ACLs).

Cisco IOS 12.2T, 12.3 and 12.3T, when using Easy VPN Server XAUTH version 6 authentication, allows remote attackers to bypass authentication via a "malformed packet."

Cisco IP/VC Videoconferencing System 3510, 3520, 3525 and 3530 contain hard-coded default SNMP community strings, which allows remote attackers to gain access, cause a denial of service, and modify configuration.

SQL injection vulnerability in Cisco Network Admission Control (NAC) Manager before 4.8.3.1 and 4.9.x before 4.9.2 allows remote attackers to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCub23095.

Cisco Unified Computing System (UCS) 1.x before 1.4(4) and 2.x before 2.0(2m) allows remote attackers to bypass KVM authentication via a crafted authentication request to a Cisco Integrated Management Controller (IMC), aka Bug ID CSCts53746.

The Cisco Prime Network Control System (NCS) appliance with software before 1.1.1.24 has a default password for the database user account, which makes it easier for remote attackers to change the configuration or cause a denial of service (service disruption) via unspecified vectors, aka Bug ID CSCtz30468.

Multiple SQL injection vulnerabilities in the device-management implementation in Cisco Connected Grid Network Management System (CG-NMS) allow remote attackers to execute arbitrary SQL commands via unspecified vectors, aka Bug IDs CSCue14553 and CSCue38746.

Cisco Secure Access Control Server (ACS) 3.2(3) and earlier spawns a separate unauthenticated TCP connection on a random port when a user authenticates to the ACS GUI, which allows remote attackers to bypass authentication by connecting to that port from the same IP address.

The Transaction Language 1 (TL1) login interface in Cisco ONS 15327 4.6(0) and 4.6(1) and 15454 and 15454 SDH 4.6(0) and 4.6(1), when a user account is configured with a blank password, allows remote attackers to gain unauthorized access by logging in with a password larger than 10 characters.

Cisco TelePresence Video Communication Server with software before X7.0.1 allows remote attackers to cause a denial of service (device crash) via a crafted SIP packet, as demonstrated by a SIP INVITE message from a Tandberg device, aka Bug ID CSCtq73319.

Cisco Secure Access Control Server (ACS) 3.2(3) and earlier, when configured with an anonymous bind in Novell Directory Services (NDS) and authenticating NDS users with NDS, allows remote attackers to gain unauthorized access to AAA clients via a blank password.

Cisco IOS 12.1(3) and 12.1(3)T allows remote attackers to read and modify device configuration data via the cable-docsis read-write community string used by the Data Over Cable Service Interface Specification (DOCSIS) standard.

A vulnerability in the Cisco Small Business Switches software could allow an unauthenticated, remote attacker to bypass the user authentication mechanism of an affected device. The vulnerability exists because under specific circumstances, the affected software enables a privileged user account without notifying administrators of the system. An attacker could exploit this vulnerability by using this account to log in to an affected device and execute commands with full admin rights. Cisco has not released software updates that address this vulnerability. This advisory will be updated with fixed software information once fixed software becomes available. There is a workaround to address this vulnerability.

The Session Initiation Protocol (SIP) implementation in multiple Cisco products including IP Phone models 7940 and 7960, IOS versions in the 12.2 train, and Secure PIX 5.2.9 to 6.2.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted INVITE messages, as demonstrated by the OUSPG PROTOS c07-sip test suite.

Multiple vulnerabilities in the H.323 protocol implementation for Cisco IOS 11.3T through 12.2T allow remote attackers to cause a denial of service and possibly execute arbitrary code, as demonstrated by the NISCC/OUSPG PROTOS test suite for the H.225 protocol.

Buffer overflow in the authentication module for Cisco ACNS 4.x before 4.2.11, and 5.x before 5.0.5, allows remote attackers to execute arbitrary code via a long password.

Cisco Personal Assistant 1.4(1) and 1.4(2) disables password authentication when "Allow Only Cisco CallManager Users" is enabled and the Corporate Directory settings refer to the directory service being used by Cisco CallManager, which allows remote attackers to gain access with a valid username.

Buffer overflow in the HTTP server for Cisco IOS 12.2 and earlier allows remote attackers to execute arbitrary code via an extremely long (2GB) HTTP GET request.

Buffer overflow in Cisco IOS 11.2.x to 12.0.x allows remote attackers to cause a denial of service and possibly execute commands via a large number of OSPF neighbor announcements.

Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 3.5.x through 4.0.REL, when enabling IPSec over TCP for a port on the concentrator, allow remote attackers to reach the private network without authentication.

Buffer overflow in the administration service (CSAdmin) for Cisco Secure ACS before 3.1.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via a long user parameter to port 2002.

Cisco Unity 2.x and 3.x uses well-known default user accounts, which could allow remote attackers to gain access and place arbitrary calls.

Cisco ONS15454 and ONS15327 running ONS before 3.4 allows remote attackers to modify the system configuration and delete files by establishing an FTP connection to the TCC, TCC+ or XTC using a username and password that does not exist.

Check Point Firewall-1 allows remote attackers to bypass port access restrictions on an FTP server by forcing it to send malicious packets that Firewall-1 misinterprets as a valid 227 response to a client's PASV attempt.