Cisco Adaptive Security Appliance (ASA) Software 9.3(2) allows remote attackers to cause a denial of service (system reload) by sending crafted OSPFv2 packets on the local network, aka Bug ID CSCut52679.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software improperly parses certain options in OSPF link-state advertisement (LSA) type 11 packets. An attacker could exploit this vulnerability by sending a crafted LSA type 11 OSPF packet to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

A vulnerability in the internal packet processing of Cisco Aironet Series Access Points (APs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected AP if the switch interface where the AP is connected has port security configured. The vulnerability exists because the AP forwards some malformed wireless client packets outside of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel. An attacker could exploit this vulnerability by sending crafted wireless packets to an affected AP. A successful exploit could allow the attacker to trigger a security violation on the adjacent switch port, which could result in a DoS condition. Note: Though the Common Vulnerability Scoring System (CVSS) score corresponds to a High Security Impact Rating (SIR), this vulnerability is considered Medium because a workaround is available and exploitation requires a specific switch configuration. There are workarounds that address this vulnerability.

A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. This vulnerability is due to a lack of input validation of the information used to generate an SNMP trap related to a wireless client connection event. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Multiple vulnerabilities in the implementation of the Cisco Discovery Protocol and Link Layer Discovery Protocol (LLDP) for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain Cisco Discovery Protocol and LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted Cisco Discovery Protocol or LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: Cisco Discovery Protocol and LLDP are Layer 2 protocols. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business RV Series Routers. An unauthenticated, adjacent attacker could execute arbitrary code or cause an affected router to leak system memory or reload. A memory leak or device reload would cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Cisco IOS XE on ASR1000 devices, when PPPoE termination is enabled, allows remote attackers to cause a denial of service (device reload) via a malformed PPPoE packet, aka Bug ID CSCuo55180.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause an affected IP camera to reload. This vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected IP camera. A successful exploit could allow the attacker to cause the affected IP camera to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities in the implementation of the Cisco Discovery Protocol and Link Layer Discovery Protocol (LLDP) for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain Cisco Discovery Protocol and LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted Cisco Discovery Protocol or LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: Cisco Discovery Protocol and LLDP are Layer 2 protocols. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

The LLDP implementation in Cisco IOS allows remote attackers to cause a denial of service (device reload) via a malformed packet, aka Bug ID CSCum96282.

A vulnerability in the Cisco Discovery Protocol of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, adjacent attacker to cause a kernel panic on an affected system, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect processing of certain Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by continuously sending certain Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause a kernel panic on the system that is running the affected software, resulting in a DoS condition.

The packet driver in Cisco IOS allows remote attackers to cause a denial of service (device reload) via a series of (1) Virtual Switching Systems (VSS) or (2) Bidirectional Forwarding Detection (BFD) packets, aka Bug IDs CSCug41049 and CSCue61890.

Cisco Videoscape Session Resource Manager (VSRM) allows remote attackers to cause a denial of service (device restart) by sending a traffic flood to upstream devices, aka Bug ID CSCva01813.

Cisco IOS 15.2(1)T1.11 and 15.2(2)TST allows remote attackers to cause a denial of service (device crash) via a crafted LLDP packet, aka Bug ID CSCun63132.

Cisco IOS XE 16.1.1 allows remote attackers to cause a denial of service (device reload) via a packet with the 00-00-00-00-00-00 source MAC address, aka Bug ID CSCux48405.

Cisco Wireless LAN Controller (WLC) devices with software 7.0(240.0), 7.3(101.0), and 7.4(1.19) allow remote attackers to cause a denial of service (device outage) by sending malformed 802.11i management data to a managed access point, aka Bug ID CSCub65236.

A vulnerability in the Cisco Discovery Protocol of Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of certain Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending certain Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DOS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Cisco IOS 15.2(3)E and earlier and IOS XE 3.6(2)E and earlier allow remote attackers to cause a denial of service (functionality loss) via crafted Cisco Discovery Protocol (CDP) packets, aka Bug ID CSCuu25770.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

The ARP implementation in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 5.2(1)SV3(1.4), Nexus 3000 devices 7.3(0)ZD(0.47), Nexus 4000 devices 4.1(2)E1, Nexus 9000 devices 7.3(0)ZD(0.61), and MDS 9000 devices 7.0(0)HSK(0.353) and SAN-OS NX-OS on MDS 9000 devices 7.0(0)HSK(0.353) allows remote attackers to cause a denial of service (ARP process restart) via crafted packet-header fields, aka Bug ID CSCut25292.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the ISDN subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the ISDN Q.931 messages are processed. An attacker could exploit this vulnerability by sending a malicious ISDN Q.931 message to an affected device. A successful exploit could allow the attacker to cause the process to crash, resulting in a reload of the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the Ethernet packet handling of Cisco Aironet Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by connecting as a wired client to the Ethernet interface of an affected device and sending a series of specific packets within a short time frame. A successful exploit could allow the attacker to cause a NULL pointer access that results in a reload of the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the Cisco Discovery Protocol of Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of certain Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending certain Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DOS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the IP Address Resolution Protocol (ARP) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers with a 20-Gbps Embedded Services Processor (ESP) installed could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service condition. The vulnerability is due to insufficient error handling when an affected device has reached platform limitations. An attacker could exploit this vulnerability by sending a malicious series of IP ARP messages to an affected device. A successful exploit could allow the attacker to exhaust system resources, which would eventually cause the affected device to reload.

A vulnerability in the PROFINET handler for Link Layer Discovery Protocol (LLDP) messages of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a crash on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of LLDP messages in the PROFINET LLDP message handler. An attacker could exploit this vulnerability by sending a malicious LLDP message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.

Cisco Adaptive Security Appliance (ASA) Software 9.3(2.243) and 100.13(0.21) allows remote attackers to cause a denial of service (device reload) by sending crafted OSPFv2 packets on the local network, aka Bug ID CSCus84220.

A vulnerability in the ingress packet processing path of Cisco Firepower Threat Defense (FTD) Software for interfaces that are configured either as Inline Pair or in Passive mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation when Ethernet frames are processed. An attacker could exploit this vulnerability by sending malicious Ethernet frames through an affected device. A successful exploit could allow the attacker do either of the following: Fill the /ngfw partition on the device: A full /ngfw partition could result in administrators being unable to log in to the device (including logging in through the console port) or the device being unable to boot up correctly. Note: Manual intervention is required to recover from this situation. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition. Cause a process crash: The process crash would cause the device to reload. No manual intervention is necessary to recover the device after the reload.

Buffer overflow in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 7.3(0)ZN(0.81), Nexus 3000 devices 7.3(0)ZN(0.81), Nexus 4000 devices 4.1(2)E1(1c), Nexus 7000 devices 7.2(0)N1(0.1), and Nexus 9000 devices 7.3(0)ZN(0.81) allows remote attackers to cause a denial of service (IGMP process restart) via a malformed IGMPv3 packet that is mishandled during memory allocation, aka Bug IDs CSCuv69713, CSCuv69717, CSCuv69723, CSCuv69732, and CSCuv48908.

Buffer overflow in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 7.3(0)ZN(0.9); Nexus 3000 devices 6.0(2)U5(1.41), 7.0(3)I2(0.373), and 7.3(0)ZN(0.83); Nexus 4000 devices 4.1(2)E1(1b); Nexus 7000 devices 6.2(14)S1; Nexus 9000 devices 7.3(0)ZN(0.9); and MDS 9000 devices 6.2 (13) and 7.1(0)ZN(91.99) and MDS SAN-OS 7.1(0)ZN(91.99) allows remote attackers to cause a denial of service (device outage) via a crafted ARP packet, related to incorrect MTU validation, aka Bug IDs CSCuv71933, CSCuv61341, CSCuv61321, CSCuu78074, CSCut37060, CSCuv61266, CSCuv61351, CSCuv61358, and CSCuv61366.

A vulnerability in the PROFINET feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to crash and reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to insufficient processing logic for crafted PROFINET packets that are sent to an affected device. An attacker could exploit this vulnerability by sending crafted PROFINET packets to an affected device for processing. A successful exploit could allow the attacker to cause the device to crash and reload, resulting in a DoS condition on the device.

Cisco Wireless LAN Controller (WLC) devices with software 7.5(102.0) and 7.6(1.62) allow remote attackers to cause a denial of service (device crash) by triggering an exception during attempted forwarding of unspecified IPv6 packets to a non-IPv6 device, aka Bug ID CSCuj01046.

A vulnerability in the WPA2 and WPA3 security implementation of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect packet processing during the WPA2 and WPA3 authentication handshake when configured for dot1x or pre-shared key (PSK) authentication key management (AKM) with 802.11r BSS Fast Transition (FT) enabled. An attacker could exploit this vulnerability by sending a crafted authentication packet to an affected device. A successful exploit could cause an affected device to reload, resulting in a DoS condition.

A vulnerability in Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a device to reload. The vulnerability is due to incorrect handling of certain valid, but not typical, Ethernet frames. An attacker could exploit this vulnerability by sending the Ethernet frames onto the Ethernet segment. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.

A vulnerability in the deep packet inspection (DPI) engine of Cisco SD-WAN vEdge Routers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient handling of malformed packets. An attacker could exploit this vulnerability by sending crafted packets through an affected device. A successful exploit could allow the attacker to cause the device to reboot, resulting in a DoS condition.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition.

Cisco Wireless LAN Controller (WLC) devices with software 7.4(1.1) allow remote attackers to cause a denial of service (wireless-networking outage) via crafted TCP traffic on the local network, aka Bug ID CSCug67104.

The ISDN implementation in Cisco IOS 15.3S allows remote attackers to cause a denial of service (device reload) via malformed Q931 SETUP messages, aka Bug ID CSCut37890.

The web-authentication functionality on Cisco Wireless LAN Controller (WLC) devices 7.3(103.8) and 7.4(110.0) allows remote attackers to cause a denial of service (device reload) via a malformed password, aka Bug ID CSCui57980.