Quectel EG25-G devices through 202006130814 allow executing arbitrary code remotely by using an AT command to place shell metacharacters in quectel_handle_fumo_cfg input in atfwd_daemon.

Improper input validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to execute commands.

A Remote Code Execution (RCE) vulnerability in the WebUI component of the eQ-3 HomeMatic CCU2 firmware up to and including version 2.57.5 and CCU3 firmware up to and including version 3.57.5 allows remote unauthenticated attackers to execute system commands as root via a simple HTTP request.

dig.php in GScripts.net DNS Tools allows remote attackers to execute arbitrary commands via shell metacharacters in the ns parameter.

The dashboard component of StackLift LocalStack 0.12.6 allows attackers to inject arbitrary shell commands via the functionName parameter.

CMCAgent in NCR Command Center Agent 16.3 on Aloha POS/BOH servers permits the submission of a runCommand parameter (within an XML document sent to port 8089) that enables the remote, unauthenticated execution of an arbitrary command as SYSTEM, as exploited in the wild in 2020 and/or 2021. NOTE: the vendor's position is that exploitation occurs only on devices with a certain "misconfiguration."

The unprivileged user portal part of CentOS Web Panel is affected by a Command Injection vulnerability leading to root Remote Code Execution.

The @ronomon/opened library before 1.5.2 is vulnerable to a command injection vulnerability which would allow a remote attacker to execute commands on the system if the library was used with untrusted input.

Remote Code Execution in cominput.jsp and comoutput.jsp in Northstar Technologies Inc NorthStar Club Management 6.3 allows remote unauthenticated users to inject and execute arbitrary system commands via the unsanitized user-controlled "command" and "commandvalues" parameters.

EVOLUCARE ECSIMAGING (aka ECS Imaging) through 6.21.5 has an OS Command Injection vulnerability via shell metacharacters and an IFS manipulation. The parameter "file" on the webpage /showfile.php can be exploited to gain root access. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "ip" parameter is directly passed to the attacker, allowing them to control the "ip" field to attack the OS.

Yealink Device Management (DM) 3.6.0.20 allows command injection as root via the /sm/api/v1/firewall/zone/services URI, without authentication.

Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input.

Several high privileged APIs on the Vizio P65-F1 6.0.31.4-2 and E50x-E1 10.0.31.4-2 Smart TVs do not enforce access controls, allowing an unauthenticated threat actor to access privileged functionality, leading to OS command execution. The specific attack methodology is a file upload.

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "command" parameter is directly passed to the attacker, allowing them to control the "command" field to attack the OS.

Netis WF2780 2.3.40404 and WF2411 1.1.29629 devices allow Shell Metacharacter Injection into the ping command, leading to remote code execution.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

In VembuBDR before 4.2.0.1 and VembuOffsiteDR before 4.2.0.1 installed on Windows, the http API located at /consumerweb/secure/download.php. Using this command argument an unauthenticated attacker can execute arbitrary OS commands with SYSTEM privileges.

Main_Analysis_Content.asp in /apply.cgi on ASUS RT-AC66U, RT-AC68U, RT-AC86U, RT-AC88U, RT-AC1900, RT-AC2900, and RT-AC3100 devices before 3.0.0.4.384_10007; RT-N18U devices before 3.0.0.4.382.39935; RT-AC87U and RT-AC3200 devices before 3.0.0.4.382.50010; and RT-AC5300 devices before 3.0.0.4.384.20287 allows OS command injection via the pingCNT and destIP fields of the SystemCmd variable.

cgi-bin/script in Aztech ADSL2/2+ 4-port router 3.7.0 build 070426 allows remote attackers to execute arbitrary commands via shell metacharacters in the query string.

Numara FootPrints 7.5a through 7.5a1 and 8.0 through 8.0a allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) transcriptFile parameter to MRcgi/MRchat.pl or (2) LOADFILE parameter to MRcgi/MRABLoad2.pl. NOTE: some of these details are obtained from third party information.

A vulnerability in the parisneo/lollms-webui version 9.3 allows attackers to bypass intended access restrictions and execute arbitrary code. The issue arises from the application's handling of the `/execute_code` endpoint, which is intended to be blocked from external access by default. However, attackers can exploit the `/update_setting` endpoint, which lacks proper access control, to modify the `host` configuration at runtime. By changing the `host` setting to an attacker-controlled value, the restriction on the `/execute_code` endpoint can be bypassed, leading to remote code execution. This vulnerability is due to improper neutralization of special elements used in an OS command (`Improper Neutralization of Special Elements used in an OS Command`).

An issue was discovered in ClipBucket before 4.0.0 Release 4902. Any OS commands can be injected via shell metacharacters in the file_name parameter to /api/file_uploader.php or /actions/file_downloader.php.

An issue was discovered in Leptonica through 1.75.3. The gplotMakeOutput function allows command injection via a $(command) approach in the gplot rootname argument. This issue exists because of an incomplete fix for CVE-2018-3836.

A server auth command injection authentication bypass vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.3 and below could allow remote attackers to escalate privileges on vulnerable installations.

The VBWinExec function in Node\AspVBObj.dll in Advantech WebAccess 8.3.0 allows remote attackers to execute arbitrary OS commands via a single argument (aka the command parameter).

A command injection vulnerability is present that permits an unauthenticated user with access to the Aruba Instant web interface to execute arbitrary system commands within the underlying operating system. An attacker could use this ability to copy files, read configuration, write files, delete files, or reboot the device. Workaround: Block access to the Aruba Instant web interface from all untrusted users. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.1

react-dev-utils on Windows allows developers to run a local webserver for accepting various commands, including a command to launch an editor. The input to that command was not properly sanitized, allowing an attacker who can make a network request to the server (either via CSRF or by direct request) to execute arbitrary commands on the targeted system. This issue affects multiple branches: 1.x.x prior to 1.0.4, 2.x.x prior to 2.0.2, 3.x.x prior to 3.1.2, 4.x.x prior to 4.2.2, and 5.x.x prior to 5.0.2.

Adobe Dreamweaver CC versions 18.0 and earlier have an OS Command Injection vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user.

general/login.php in phpCollab 2.5 rc3 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in unspecified input related to the SSL_CLIENT_CERT environment variable. NOTE: in some environments, SSL_CLIENT_CERT always has a base64-encoded string value, which may impose constraints on injection for typical shells.

The Crestron Console service running on DGE-100, DM-DGE-200-C, and TS-1542-C devices with default configuration and running firmware versions 1.3384.00049.001 and lower are vulnerable to command injection that can be used to gain root-level access.

Seagate Media Server in Seagate Personal Cloud has unauthenticated command injection in the uploadTelemetry and getLogs functions in views.py because .psp URLs are handled by the fastcgi.server component and shell metacharacters are mishandled.

A command injection vulnerability exists in the `TranscriptEndpoint` of mudler/localai, specifically within the `audioToWav` function used for converting audio files to WAV format for transcription. The vulnerability arises due to the lack of sanitization of user-supplied filenames before passing them to ffmpeg via a shell command, allowing an attacker to execute arbitrary commands on the host system. Successful exploitation could lead to unauthorized access, data breaches, or other detrimental impacts, depending on the privileges of the process executing the code.

The pdfinfojs NPM module versions <= 0.3.6 has a command injection vulnerability that allows an attacker to execute arbitrary commands on the victim's machine.

A command injection in git-dummy-commit v1.3.0 allows os level commands to be executed due to an unescaped parameter.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

Command injection exists in pdf-image v2.0.0 due to an unescaped string parameter.

Remote Code execution vulnerability in Micro Focus Operation Bridge Reporter (OBR) product, affecting version 10.40. The vulnerability could be exploited to allow Remote Code Execution on the OBR server.

An OS Command Injection vulnerability exists in the ping.php script functionality of Advantech R-SeeNet v 2.4.12 (20.10.2020). A specially crafted HTTP request can lead to arbitrary OS command execution. An attacker can send a crafted HTTP request to trigger this vulnerability.

An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. The login form passes user input directly to a shell command without any kind of escaping or validation in /usr/share/www/check.lp file. An attacker is able to perform command injection using the "password" parameter in the login form.

LibreNMS 1.46 allows remote attackers to execute arbitrary OS commands by using the $_POST['community'] parameter to html/pages/addhost.inc.php during creation of a new device, and then making a /ajax_output.php?id=capture&format=text&type=snmpwalk&hostname=localhost request that triggers html/includes/output/capture.inc.php command mishandling.

An issue was discovered in ASUSWRT 3.0.0.4.384.20308. When processing the /start_apply.htm POST data, there is a command injection issue via shell metacharacters in the fb_email parameter. By using this issue, an attacker can control the router and get shell.

HooToo TripMate Titan HT-TM05 and HT-05 routers with firmware 2.000.022 and 2.000.082 allow remote command execution via shell metacharacters in the mac parameter of a protocol.csp?function=set&fname=security&opt=mac_table request.

D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string.

In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string.

In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.

APKLeaks is an open-source project for scanning APK file for URIs, endpoints & secrets. APKLeaks prior to v2.0.3 allows remote attackers to execute arbitrary OS commands via package name inside application manifest. An attacker could include arguments that allow unintended commands or code to be executed, allow sensitive data to be read or modified or could cause other unintended behavior through malicious package name. The problem is fixed in version v2.0.6-dev and above.

A remote code execution issue was discovered in Zoho ManageEngine Applications Manager before 13.6 (build 13640). The publicly accessible testCredential.do endpoint takes multiple user inputs and validates supplied credentials by accessing a specified system. This endpoint calls several internal classes, and then executes a PowerShell script. If the specified system is OfficeSharePointServer, then the username and password parameters to this script are not validated, leading to Command Injection.

SolarView Compact SV-CPT-MC310 prior to Ver.6.5 allows an attacker to execute arbitrary OS commands with the web server privilege via unspecified vectors.

In Geutebrueck GmbH E2 Camera Series versions prior to 1.12.0.25 the DDNS configuration (in the Network Configuration panel) is vulnerable to an OS system command injection as root.