Liferay Portal Server tested on 7.3.5 GA6, 7.2.0 GA1 is affected by OS Command Injection. An administrator user can inject commands through the Gogo Shell module to execute any OS command on the Liferay Portal Sever. NOTE: The developer disputes this as a vulnerability since it is a feature for administrators to access and execute commands in Gogo Shell and therefore not a design fla

ginkgosnmp.inc in HP System Management Homepage (SMH) allows remote authenticated users to execute arbitrary commands via shell metacharacters in the PATH_INFO to smhutil/snmpchp.php.en.

TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the t_bindif field of an admin/bridge command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/bridge.lua in uhttpd.

CouchDB administrative users can configure the database server via HTTP(S). Some of the configuration options include paths for operating system-level binaries that are subsequently launched by CouchDB. This allows an admin user in Apache CouchDB before 1.7.0 and 2.x before 2.1.1 to execute arbitrary shell commands as the CouchDB user, including downloading and executing scripts from the public internet.

NeDi 1.9C is vulnerable to Remote Command Execution. System-Snapshot.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a psw parameter. (This can also be exploited via CSRF.)

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If an attacker logs in to the affected product with an administrative account and manipulates requests for a certain screen operation, an arbitrary OS command may be executed. This vulnerability was reported on a different screen operation from CVE-2025-20617.

TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the t_bindif field of an admin/interface command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/interface.lua in uhttpd.

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

Improper neutralization of special elements in the SonicWall SSL-VPN SMA100 series management interface allows a remote authenticated attacker to inject OS Commands which potentially leads to remote command execution vulnerability or denial of service (DoS) attack.

TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the iface field of an admin/diagnostic command to cgi-bin/luci, related to the zone_get_effect_devices function in /usr/lib/lua/luci/controller/admin/diagnostic.lua in uhttpd.

Xplico before 1.2.1 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the name of an uploaded PCAP file. NOTE: this issue can be exploited without authentication by leveraging the user registration feature.

NeDi 1.9C is vulnerable to Remote Command Execution. pwsec.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a pw parameter. (This can also be exploited via CSRF.)

OS Command Injection in Packagist microweber/microweber prior to 1.2.11.

A vulnerability classified as critical was found in Ruijie RG-EG350 up to 20240318. Affected by this vulnerability is the function setAction of the file /itbox_pi/networksafe.php?a=set of the component HTTP POST Request Handler. The manipulation of the argument bandwidth leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257977 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A10 Thunder ADC CsrRequestView Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of A10 Thunder ADC. Authentication is required to exploit this vulnerability. The specific flaw exists within the CsrRequestView class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of a10user. Was ZDI-CAN-22517.

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

lib/rrd.php in Cacti 1.1.27 allows remote authenticated administrators to execute arbitrary OS commands via the path_rrdtool parameter in an action=save request to settings.php.

NETGEAR DGN2200v4 devices before 2017-01-06 are affected by command execution and an FTP insecure root directory.

Seeds acmailer before 3.8.21 and 3.9.x before 3.9.15 Beta allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.

Ruckus Wireless H500 web management interface authenticated command injection

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

pfSense before 2.3 allows remote authenticated users to execute arbitrary OS commands via a '|' character in the status_rrd_graph_img.php graph parameter, related to _rrd_graph_img.php.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

IBM BigFix Platform 9.0, 9.1 before 9.1.8, and 9.2 before 9.2.8 allow remote authenticated users to execute arbitrary commands by leveraging report server access. IBM X-Force ID: 111302.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device.

There is remote authenticated OS command injection on TP-Link Archer C20i 0.9.1 3.2 v003a.0 Build 170221 Rel.55462n devices vie the X_TP_ExternalIPv6Address HTTP parameter, allowing a remote attacker to run arbitrary commands on the router with root privileges.

An issue was discovered on Victure WR1200 devices through 1.0.3. A command injection vulnerability was found within the web interface of the device, allowing an attacker with valid credentials to inject arbitrary shell commands to be executed by the device with root privileges. This occurs in the ping and traceroute features. An attacker would thus be able to use this vulnerability to open a reverse shell on the device with root privileges.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.2 and below, version 8.5.2 and below, version 8.4.2 and below, version 8.3.2 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests to the alarm dashboard and controller config handlers.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device.

GLPI is an open source IT Asset Management, issue tracking system and service desk system. The GLPI addressing plugin in versions < 2.9.1 suffers from authenticated Remote Code Execution vulnerability, allowing access to the server's underlying operating system using command injection abuse of functionality. There is no workaround for this issue and users are advised to upgrade or to disable the addressing plugin.

There is a Potential Zip Slip Vulnerability and OS Command Injection Vulnerability on the management system of baserCMS. Users with permissions to upload files may upload crafted zip files which may execute arbitrary commands on the host operating system. This is a vulnerability that needs to be addressed when the management system is used by an unspecified number of users. If you are eligible, please update to the new version as soon as possible.

icewind1991 SMB before 1.0.3 allows remote authenticated users to execute arbitrary SMB commands via shell metacharacters in the user argument in the (1) listShares function in Server.php or the (2) connect or (3) read function in Share.php.

The Device42 Remote Collector before 17.05.01 does not sanitize user input in its SNMP Connectivity utility. This allows an authenticated attacker (with access to the console application) to execute arbitrary OS commands and escalate privileges.

In QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8, the local www-data user can execute sudo mysql without a password, which means that the www-data user can execute arbitrary OS commands via the mysql -e option.

A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service.

rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.

MitraStar GPT-2541GNAC-N1 (HGU) 100VNZ0b33 devices allow remote authenticated users to obtain root access by executing command "deviceinfo show file &&/bin/bash" because of incorrect sanitization of parameter "path".

Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and below, 6.3.15 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

The admin web interface in Cisco AsyncOS 8.x before 8.0.8-113, 8.1.x and 8.5.x before 8.5.3-051, 8.6.x and 8.7.x before 8.7.0-171-LD, and 8.8.x before 8.8.0-085 on Web Security Appliance (WSA) devices allows remote authenticated users to obtain root privileges via crafted certificate-generation arguments, aka Bug ID CSCus83445.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8 allows an authenticated remote attacker to execute code on the server via command injection in the servicestart parameter.

The external SMB storage driver in ownCloud Server before 6.0.8, 7.0.x before 7.0.6, and 8.0.x before 8.0.4 allows remote authenticated users to execute arbitrary SMB commands via a ; (semicolon) character in a file.

The ATOS/Sips (aka Atos-Magento) community module 3.0.0 to 3.0.5 for Magento allows command injection.

A vulnerability, which was classified as critical, has been found in Totolink X6000R 9.4.0cu.852_20230719. This issue affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation of the argument ip leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-256313 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Centreon before 19.04.15 allows remote attackers to execute arbitrary OS commands by placing shell metacharacters in RRDdatabase_status_path (via a main.get.php request) and then visiting the include/views/graphs/graphStatus/displayServiceStatus.php page.