Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when receiving messages with invalid checksums.

Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when deserializing transactions.

An Uncontrolled Resource Consumption vulnerability in the H.323 ALG (Application Layer Gateway) of  Juniper Networks Junos OS on SRX Series and MX Series with SPC3 and MS-MPC/MIC, allows an unauthenticated network-based attacker to send specific packets causing traffic loss leading to Denial of Service (DoS).  Continued receipt and processing of these specific packets will sustain the Denial of Service condition. The memory usage can be monitored using the below command.   user@host> show usp memory segment sha data objcache jsf  This issue affects SRX Series and MX Series with SPC3 and MS-MPC/MIC:  *  20.4 before 20.4R3-S10,  *  21.2 before 21.2R3-S6,  *  21.3 before 21.3R3-S5,  *  21.4 before 21.4R3-S6,  *  22.1 before 22.1R3-S4,  *  22.2 before 22.2R3-S2,  *  22.3 before 22.3R3-S1,  *  22.4 before 22.4R3,  *  23.2 before 23.2R2.

Werkzeug is a Web Server Gateway Interface web application library. Applications using `werkzeug.formparser.MultiPartParser` corresponding to a version of Werkzeug prior to 3.0.6 to parse `multipart/form-data` requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds. Werkzeug version 3.0.6 fixes this issue.

Windows Online Certificate Status Protocol (OCSP) Server Denial of Service Vulnerability

An uncontrolled resource consumption vulnerability in Palo Alto Networks PAN-OS allows for a remote unauthenticated user to upload temporary files through the management web interface that are not properly deleted after the request is finished. It is possible for an attacker to disrupt the availability of the management web interface by repeatedly uploading files until available disk space is exhausted. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.4; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

Zoho ManageEngine ServiceDesk Plus through 14104, Asset Explorer through 6987, ServiceDesk Plus MSP before 14000, and Support Center Plus before 14000 allow Denial-of-Service (DoS).

A vulnerability was found in zhangyd-c OneBlog up to 2.3.9. It has been classified as problematic. Affected is an unknown function of the component HTTP Header Handler. The manipulation of the argument X-Forwarded-For leads to inefficient regular expression complexity. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.7 are vulnerable to a denial of service via a crafted HTTP request.

Minimatch is a minimal matching utility that works by converting glob expressions into JavaScript `RegExp` objects. The primary function, `minimatch(path, pattern)` in Minimatch 3.0.1 and earlier is vulnerable to ReDoS in the `pattern` parameter.

LINE client for iOS before 12.17.0 might be crashed by sharing an invalid shared key of e2ee in group chat.

negotiator is an HTTP content negotiator for Node.js and is used by many modules and frameworks including Express and Koa. The header for "Accept-Language", when parsed by negotiator 0.6.0 and earlier is vulnerable to Regular Expression Denial of Service via a specially crafted string.

BranchCache Denial of Service Vulnerability

Uncontrolled resource consumption in Windows Standards-Based Storage Management Service allows an unauthorized attacker to deny service over a network.

Windows Online Certificate Status Protocol (OCSP) Server Denial of Service Vulnerability

jshamcrest is vulnerable to regular expression denial of service (ReDoS) when certain types of user input is passed in to the emailAddress validator.

jadedown is vulnerable to regular expression denial of service (ReDoS) when certain types of user input is passed in.

IBM WebSphere Application Server and WebSphere Application Server Liberty are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

The __decode_dotted function in libc/inet/resolv.c in uClibc-ng before 1.0.12 allows remote DNS servers to cause a denial of service (infinite loop) via vectors involving compressed items in a reply.

Uncontrolled resource consumption in Windows Standards-Based Storage Management Service allows an unauthorized attacker to deny service over a network.

AnyDesk 7.0.8 allows remote Denial of Service.

Versions of the package pacote from 11.2.7 and before 21.5.1 are vulnerable to Denial of Service (DoS) via the addGitSha function. An attacker can exploit this vulnerability by supplying a specially crafted spec.rawSpec value that triggers the function’s regex replacement and string-manipulation logic, causing excessive CPU consumption and potentially stalling or crashing the process.

Versions of the package libredwg before 0.12.5.6384 are vulnerable to Denial of Service (DoS) due to an out-of-bounds read involving section->num_pages in decode_r2007.c.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

.NET and Visual Studio Denial of Service Vulnerability

On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2.

An issue found in DUALSPACE Super Secuirty v.2.3.7 allows an attacker to cause a denial of service via the SharedPreference files.

A vulnerability was found in yarnpkg Yarn up to 1.22.22. It has been classified as problematic. Affected is the function explodeHostedGitFragment of the file src/resolvers/exotics/hosted-git-resolver.js. The manipulation leads to inefficient regular expression complexity. It is possible to launch the attack remotely. The patch is identified as 97731871e674bf93bcbf29e9d3258da8685f3076. It is recommended to apply a patch to fix this issue.

Uncontrolled resource consumption in Windows Standards-Based Storage Management Service allows an unauthorized attacker to deny service over a network.

DHCP Server Service Denial of Service Vulnerability

Windows Remote Desktop Gateway (RD Gateway) Denial of Service Vulnerability

Controller DoS due to buffer overflow in the handling of a specially crafted message received by the controller. See Honeywell Security Notification for recommendations on upgrading and versioning. See Honeywell Security Notification for recommendations on upgrading and versioning.

cmark-gfm is GitHub's fork of cmark, a CommonMark parsing and rendering library and program in C. A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. This CVE covers quadratic complexity issues when parsing text which leads with either large numbers of `_` characters. This issue has been addressed in version 0.29.0.gfm.10. Users are advised to upgrade. Users unable to upgrade should validate that their input comes from trusted sources. ### Impact A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. ### Proof of concept ``` $ ~/cmark-gfm$ python3 -c 'pad = "_" * 100000; print(pad + "." + pad, end="")' | time ./build/src/cmark-gfm --to plaintext ``` Increasing the number 10000 in the above commands causes the running time to increase quadratically. ### Patches This vulnerability have been patched in 0.29.0.gfm.10. ### Note on cmark and cmark-gfm XXX: TBD [cmark-gfm](https://github.com/github/cmark-gfm) is a fork of [cmark](https://github.com/commonmark/cmark) that adds the GitHub Flavored Markdown extensions. The two codebases have diverged over time, but share a common core. These bugs affect both `cmark` and `cmark-gfm`. ### Credit We would like to thank @gravypod for reporting this vulnerability. ### References https://en.wikipedia.org/wiki/Time_complexity ### For more information If you have any questions or comments about this advisory: * Open an issue in [github/cmark-gfm](https://github.com/github/cmark-gfm)

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to make the farm unusable by adding an object to a page with a huge number (e.g. 67108863). Most of the time this will fill the memory allocated to XWiki and make it unusable every time this document is manipulated. This issue has been patched in XWiki 14.0-rc-1.

Mitsubishi MELSEC iQ-R Series PLCs with firmware 49 allow an unauthenticated attacker to halt the industrial process by sending a crafted packet over the network. This denial of service attack exposes Improper Input Validation. After halting, physical access to the PLC is required in order to restore production, and the device state is lost. This is related to R04CPU, RJ71GF11-T2, R04CPU, and RJ71GF11-T2.

Impact: The undici WebSocket client enforces maxPayloadSize per-frame but does not enforce the cumulative size of fragmented uncompressed messages. A malicious WebSocket server can stream many small fragments that each pass per-frame validation but collectively exceed the configured limit, causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service. Affected applications are those using the undici WebSocket client (new WebSocket(...)) that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint. This is a regression specific to undici 8.1.0. The 6.25.0 line shipped the equivalent cumulative check from the start and is unaffected. The 7.x line never had the maxPayloadSize feature and is also unaffected. Patches: Upgrade to undici >= 8.5.0. Workarounds: No workaround is available. The fix must be applied through an upgrade.

opentelemetry-go-contrib is a collection of extensions for OpenTelemetry-Go. The v0.38.0 release of `go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp` uses the `httpconv.ServerRequest` function to annotate metric measurements for the `http.server.request_content_length`, `http.server.response_content_length`, and `http.server.duration` instruments. The `ServerRequest` function sets the `http.target` attribute value to be the whole request URI (including the query string)[^1]. The metric instruments do not "forget" previous measurement attributes when `cumulative` temporality is used, this means the cardinality of the measurements allocated is directly correlated with the unique URIs handled. If the query string is constantly random, this will result in a constant increase in memory allocation that can be used in a denial-of-service attack. This issue has been addressed in version 0.39.0. Users are advised to upgrade. There are no known workarounds for this issue.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

A vulnerability has been identified in SIMATIC S7-300 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions), SIMATIC TDC CPU555 (All versions), SINUMERIK 840D sl (All versions). Sending multiple specially crafted packets to the affected devices could cause a Denial-of-Service on port 102. A cold restart is required to recover the service.

Certain input strings when passed to new Date() or Date.parse() in ecstatic node module before 1.4.0 will cause v8 to raise an exception. This leads to a crash and denial of service in ecstatic when this input is passed into the server via the If-Modified-Since header.

Denial-of-service due to invalid pointer in the Audio/Video: Web Codecs component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11.

In ZeroMQ before version 4.3.3, there is a denial-of-service vulnerability. Users with TCP transport public endpoints, even with CURVE/ZAP enabled, are impacted. If a raw TCP socket is opened and connected to an endpoint that is fully configured with CURVE/ZAP, legitimate clients will not be able to exchange any message. Handshakes complete successfully, and messages are delivered to the library, but the server application never receives them. This is patched in version 4.3.3.

ansi2html is vulnerable to regular expression denial of service (ReDoS) when certain types of user input is passed in.

NTP before 4.2.8p6 and 4.3.0 before 4.3.90 allows a remote attackers to cause a denial of service (stack exhaustion) via an ntpdc relist command, which triggers recursive traversal of the restriction list.

A vulnerability was found in RESTEasy, where RootNode incorrectly caches routes. This issue results in hash flooding, leading to slower requests with higher CPU time spent searching and adding the entry. This flaw allows an attacker to cause a denial of service.

Windows Online Certificate Status Protocol (OCSP) Server Denial of Service Vulnerability

The MQTT protocol 3.1.1 requires a server to set a timeout value of 1.5 times the Keep-Alive value specified by a client, which allows remote attackers to cause a denial of service (loss of the ability to establish new connections), as demonstrated by SlowITe.

The resolver in nginx before 1.8.1 and 1.9.x before 1.9.10 does not properly limit CNAME resolution, which allows remote attackers to cause a denial of service (worker process resource consumption) via vectors related to arbitrary name resolution.

IBM Langflow OSS 1.0.0 through 1.9.0 could allow a denial of service due to uncontrolled resource consumption.