There is an open race window when writing output in the following utilities in GNU binutils version 2.35 and earlier:ar, objcopy, strip, ranlib. When these utilities are run as a privileged user (presumably as part of a script updating binaries across different users), an unprivileged user can trick these utilities into getting ownership of arbitrary files through a symlink.

A flaw was found in instack-undercloud 7.2.0 as packaged in Red Hat OpenStack Platform Pike, 6.1.0 as packaged in Red Hat OpenStack Platform Oacta, 5.3.0 as packaged in Red Hat OpenStack Newton, where pre-install and security policy scripts used insecure temporary files. A local user could exploit this flaw to conduct a symbolic-link attack, allowing them to overwrite the contents of arbitrary files.

Race condition in the SPICE (aka spice-xpi) plug-in 2.2 for Firefox allows local users to obtain sensitive information, and conduct man-in-the-middle attacks, by providing a UNIX socket for communication between this plug-in and the client (aka qspice-client) in qspice 0.3.0, and then accessing this socket.

A flaw was found in keycloak where keycloak may fail to logout user session if the logout request comes from external SAML identity provider and Principal Type is set to Attribute [Name].

In postgresql 9.3.x before 9.3.21, 9.4.x before 9.4.16, 9.5.x before 9.5.11, 9.6.x before 9.6.7 and 10.x before 10.2, pg_upgrade creates file in current working directory containing the output of `pg_dumpall -g` under umask which was in effect when the user invoked pg_upgrade, and not under 0077 which is normally used for other temporary files. This can allow an authenticated attacker to read or modify the one file, which may contain encrypted or unencrypted database passwords. The attack is infeasible if a directory mode blocks the attacker searching the current working directory or if the prevailing umask blocks the attacker opening the file.

The System Security Services Daemon (SSSD) 1.11.6 does not properly identify group membership when a non-POSIX group is in a group membership chain, which allows local users to bypass access restrictions via unspecified vectors.

A PGP signature bypass flaw was found in fwupd (all versions), which could lead to the installation of unsigned firmware. As per upstream, a signature bypass is theoretically possible, but not practical because the Linux Vendor Firmware Service (LVFS) is either not implemented or enabled in versions of fwupd shipped with Red Hat Enterprise Linux 7 and 8. The highest threat from this vulnerability is to confidentiality and integrity.

A flaw was found in Ansible 2.7.16 and prior, 2.8.8 and prior, and 2.9.5 and prior when a password is set with the argument "password" of svn module, it is used on svn command line, disclosing to other users within the same node. An attacker could take advantage by reading the cmdline file from that particular PID on the procfs.

Ansible fetch module before versions 2.5.15, 2.6.14, 2.7.8 has a path traversal vulnerability which allows copying and overwriting files outside of the specified destination in the local ansible controller host, by not restricting an absolute path.

A flaw was found in libvirt while it generates SELinux MCS category pairs for VMs' dynamic labels. This flaw allows one exploited guest to access files labeled for another guest, resulting in the breaking out of sVirt confinement. The highest threat from this vulnerability is to confidentiality and integrity.

The SPICE Firefox plug-in (spice-xpi) 2.4, 2.3, 2.2, and possibly other versions allows local users to overwrite arbitrary files via a symlink attack on the usbrdrctl log file, which has a predictable name.

The SPICE (aka spice-xpi) plug-in 2.2 for Firefox allows local users to overwrite arbitrary files via a symlink attack on an unspecified log file.

The configtest function in the Red Hat dhcpd init script for DHCP 3.0.1 in Red Hat Enterprise Linux (RHEL) 3 allows local users to overwrite arbitrary files via a symlink attack on an unspecified temporary file, related to the "dhcpd -t" command.

sosreport in SoS 3.x allows local users to obtain sensitive information from sosreport files or gain privileges via a symlink attack on an archive file in a temporary directory, as demonstrated by sosreport-$hostname-$date.tar in /tmp/sosreport-$hostname-$date.

A symbolic link issue was found in rpm. It occurs when rpm sets the desired permissions and credentials after installing a file. A local unprivileged user could use this flaw to exchange the original file with a symbolic link to a security-critical file and escalate their privileges on the system. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

A path traversal vulnerability was found in the CPIO utility. This issue could allow a remote unauthenticated attacker to trick a user into opening a specially crafted archive. During the extraction process, the archiver could follow symlinks outside of the intended directory, which allows files to be written in arbitrary directories through symlinks.

The abrt-action-install-debuginfo-to-abrt-cache help program in Automatic Bug Reporting Tool (ABRT) before 2.7.1 allows local users to write to arbitrary files via a symlink attack on unpacked.cpio in a pre-created directory with a predictable name in /var/tmp.

The Hotspot component in OpenJDK8 as packaged in Red Hat Enterprise Linux 6 and 7 allows local users to write to arbitrary files via a symlink attack.

Red Hat Cluster Project 2.x allows local users to modify or overwrite arbitrary files via symlink attacks on files in /tmp, involving unspecified components in Resource Group Manager (aka rgmanager) before 2.03.09-1, gfs2-utils before 2.03.09-1, and CMAN - The Cluster Manager before 2.03.09-1 on Fedora 9.

A directory traversal issue was found in reposync, a part of yum-utils, where reposync fails to sanitize paths in remote repository configuration files. If an attacker controls a repository, they may be able to copy files outside of the destination directory on the targeted system via path traversal. If reposync is running with heightened privileges on a targeted system, this flaw could potentially result in system compromise via the overwriting of critical system files. Version 1.1.31 and older are believed to be affected.

rc.sysinit in initscripts before 8.76.3-1 on Fedora 9 and other Linux platforms allows local users to delete arbitrary files via a symlink attack on a file or directory under (1) /var/lock or (2) /var/run.

A flaw was found in RPC request using gfs3_symlink_req in glusterfs server which allows symlink destinations to point to file paths outside of the gluster volume. An authenticated attacker could use this flaw to create arbitrary symlinks pointing anywhere on the server and execute arbitrary code on glusterfs server nodes.

It was found that the fix for CVE-2018-10927, CVE-2018-10928, CVE-2018-10929, CVE-2018-10930, and CVE-2018-10926 was incomplete. A remote, authenticated attacker could use one of these flaws to execute arbitrary code, create arbitrary files, or cause denial of service on glusterfs server nodes via symlinks to relative paths.

The mountpoint_last function in fs/namei.c in the Linux kernel before 3.15.8 does not properly maintain a certain reference count during attempts to use the umount system call in conjunction with a symlink, which allows local users to cause a denial of service (memory consumption or use-after-free) or possibly have unspecified other impact via the umount program.

The (1) shell_exec function in lib/util/MiqSshUtilV1.rb and (2) temp_cmd_file function in lib/util/MiqSshUtilV2.rb in Red Hat CloudForms 3.0 Management Engine (CFME) before 5.2.4.2 allow local users to execute arbitrary commands via a symlink attack on a temporary file with a predictable name.

ppc64-diag 2.6.1 allows local users to overwrite arbitrary files via a symlink attack related to (1) rtas_errd/diag_support.c and /tmp/get_dt_files, (2) scripts/ppc64_diag_mkrsrc and /tmp/diagSEsnap/snapH.tar.gz, or (3) lpd/test/lpd_ela_test.sh and /var/tmp/ras.

(1) core/tests/test_memmap.py, (2) core/tests/test_multiarray.py, (3) f2py/f2py2e.py, and (4) lib/tests/test_io.py in NumPy before 1.8.1 allow local users to write to arbitrary files via a symlink attack on a temporary file.

rubyzip gem rubyzip version 1.2.1 and earlier contains a Directory Traversal vulnerability in Zip::File component that can result in write arbitrary files to the filesystem. This attack appear to be exploitable via If a site allows uploading of .zip files , an attacker can upload a malicious file that contains symlinks or files with absolute pathnames "../" to write arbitrary files to the filesystem..

The pserver_shutdown function in fence_egenera in cman 2.20080629 and 2.20080801 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/eglog temporary file.

The LXC driver (lxc/lxc_driver.c) in libvirt 1.0.1 through 1.2.1 allows local users to (1) delete arbitrary host devices via the virDomainDeviceDettach API and a symlink attack on /dev in the container; (2) create arbitrary nodes (mknod) via the virDomainDeviceAttach API and a symlink attack on /dev in the container; and cause a denial of service (shutdown or reboot host OS) via the (3) virDomainShutdown or (4) virDomainReboot API and a symlink attack on /dev/initctl in the container, related to "paths under /proc/$PID/root" and the virInitctlSetRunLevel function.

rss-newsfeed.php in Nagios Core 3.4.4, 3.5.1, and earlier, when MAGPIE_CACHE_ON is set to 1, allows local users to overwrite arbitrary files via a symlink attack on /tmp/magpie_cache.

Red Hat Storage 2.0 allows local users to overwrite arbitrary files via a symlink attack on the (1) e, (2) local-bricks.list, (3) bricks.err, or (4) limits.conf files in /tmp.

OpenFabrics ibutils 1.5.7 allows local users to overwrite arbitrary files via a symlink attack on (1) ibdiagnet.db, (2) ibdiagnet.fdbs, (3) ibdiagnet_ibis.log, (4) ibdiagnet.log, (5) ibdiagnet.lst, (6) ibdiagnet.mcfdbs, (7) ibdiagnet.pkey, (8) ibdiagnet.psl, (9) ibdiagnet.slvl, or (10) ibdiagnet.sm in /tmp/.

The (1) tomcat5, (2) tomcat6, and (3) tomcat7 init scripts, as used in the RPM distribution of Tomcat for JBoss Enterprise Web Server 1.0.2 and 2.0.0, and Red Hat Enterprise Linux 5 and 6, allow local users to change the ownership of arbitrary files via a symlink attack on (a) tomcat5-initd.log, (b) tomcat6-initd.log, (c) catalina.out, or (d) tomcat7-initd.log.

nagios.upgrade_to_v3.sh, as distributed by Red Hat and possibly others for Nagios Core 3.4.4, 3.5.1, and earlier, allows local users to overwrite arbitrary files via a symlink attack on a temporary nagioscfg file with a predictable name in /tmp/.

A flaw was found in Go. When FIPS mode is enabled on a system, container runtimes may incorrectly handle certain file paths due to improper validation in the containers/common Go library. This flaw allows an attacker to exploit symbolic links and trick the system into mounting sensitive host directories inside a container. This issue also allows attackers to access critical host files, bypassing the intended isolation between containers and the host system.

A certain Red Hat script for sudo 1.7.2 on Red Hat Enterprise Linux (RHEL) 5 allows local users to overwrite arbitrary files via a symlink attack on the /var/tmp/nsswitch.conf.bak temporary file.

A vulnerability was found in GNU Nano that allows a possible privilege escalation through an insecure temporary file. If Nano is killed while editing, a file it saves to an emergency file with the permissions of the running user provides a window of opportunity for attackers to escalate privileges through a malicious symlink.

sealert in setroubleshoot 2.0.5 allows local users to overwrite arbitrary files via a symlink attack on the sealert.log temporary file.

CoolKey 1.1.0 allows local users to overwrite arbitrary files via a symlink attack on temporary files in the /tmp/.pk11ipc1/ directory.

The init.d script for the X.Org X11 xfs font server on various Linux distributions might allow local users to change the permissions of arbitrary files via a symlink attack on the /tmp/.font-unix temporary file.

(1) oo-analytics-export and (2) oo-analytics-import in the openshift-origin-broker-util package in Red Hat OpenShift Enterprise 1 and 2 allow local users to have unspecified impact via a symlink attack on an unspecified file in /tmp.

HP Linux Imaging and Printing (HPLIP) through 3.12.4 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/hpcupsfilterc_#.bmp, (2) /tmp/hpcupsfilterk_#.bmp, (3) /tmp/hpcups_job#.out, (4) /tmp/hpijs_#####.out, or (5) /tmp/hpps_job#.out temporary file, a different vulnerability than CVE-2011-2722.

All versions of Samba prior to 4.15.5 are vulnerable to a malicious client using a server symlink to determine if a file or directory exists in an area of the server file system not exported under the share definition. SMB1 with unix extensions has to be enabled in order for this attack to succeed.

The LiveUpdate capability (liveupdate.sh) in Symantec AntiVirus Scan Engine 4.0 and 4.3 for Red Hat Linux allows local users to create or append to arbitrary files via a symlink attack on /tmp/LiveUpdate.log.

A flaw was found in Mercurial before 4.9. It was possible to use symlinks and subrepositories to defeat Mercurial's path-checking logic and write files outside a repository.

Versions of the npm CLI prior to 6.13.3 are vulnerable to an Arbitrary File Write. It is possible for packages to create symlinks to files outside of thenode_modules folder through the bin field upon installation. A properly constructed entry in the package.json bin field would allow a package publisher to create a symlink pointing to arbitrary files on a user's system when the package is installed. This behavior is still possible through install scripts. This vulnerability bypasses a user using the --ignore-scripts install option.

Hardlink before 0.1.2 operates on full file system objects path names which can allow a local attacker to use this flaw to conduct symlink attacks.

Samba before versions 4.6.1, 4.5.7 and 4.4.11 are vulnerable to a malicious client using a symlink race to allow access to areas of the server file system not exported under the share definition.

Privilege escalation flaws were found in the Red Hat initialization scripts of PostgreSQL. An attacker with access to the postgres user account could use these flaws to obtain root access on the server machine.