A flaw was found in the Ansible Engine when the fetch module is used. An attacker could intercept the module, inject a new path, and then choose a new destination path on the controller node. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

There is an open race window when writing output in the following utilities in GNU binutils version 2.35 and earlier:ar, objcopy, strip, ranlib. When these utilities are run as a privileged user (presumably as part of a script updating binaries across different users), an unprivileged user can trick these utilities into getting ownership of arbitrary files through a symlink.

A flaw was found in libvirt while it generates SELinux MCS category pairs for VMs' dynamic labels. This flaw allows one exploited guest to access files labeled for another guest, resulting in the breaking out of sVirt confinement. The highest threat from this vulnerability is to confidentiality and integrity.

A flaw was found in keycloak where keycloak may fail to logout user session if the logout request comes from external SAML identity provider and Principal Type is set to Attribute [Name].

A flaw was found in Ansible 2.7.16 and prior, 2.8.8 and prior, and 2.9.5 and prior when a password is set with the argument "password" of svn module, it is used on svn command line, disclosing to other users within the same node. An attacker could take advantage by reading the cmdline file from that particular PID on the procfs.

A PGP signature bypass flaw was found in fwupd (all versions), which could lead to the installation of unsigned firmware. As per upstream, a signature bypass is theoretically possible, but not practical because the Linux Vendor Firmware Service (LVFS) is either not implemented or enabled in versions of fwupd shipped with Red Hat Enterprise Linux 7 and 8. The highest threat from this vulnerability is to confidentiality and integrity.

Race condition in the SPICE (aka spice-xpi) plug-in 2.2 for Firefox allows local users to obtain sensitive information, and conduct man-in-the-middle attacks, by providing a UNIX socket for communication between this plug-in and the client (aka qspice-client) in qspice 0.3.0, and then accessing this socket.

Context relabeling of filesystems is vulnerable to symbolic link attack, allowing a local, unprivileged malicious entity to change the SELinux context of an arbitrary file to a context with few restrictions. This only happens when the relabeling process is done, usually when taking SELinux state from disabled to enable (permissive or enforcing). The issue was found in policycoreutils 2.5-11.

In postgresql 9.3.x before 9.3.21, 9.4.x before 9.4.16, 9.5.x before 9.5.11, 9.6.x before 9.6.7 and 10.x before 10.2, pg_upgrade creates file in current working directory containing the output of `pg_dumpall -g` under umask which was in effect when the user invoked pg_upgrade, and not under 0077 which is normally used for other temporary files. This can allow an authenticated attacker to read or modify the one file, which may contain encrypted or unencrypted database passwords. The attack is infeasible if a directory mode blocks the attacker searching the current working directory or if the prevailing umask blocks the attacker opening the file.

A flaw was found in instack-undercloud 7.2.0 as packaged in Red Hat OpenStack Platform Pike, 6.1.0 as packaged in Red Hat OpenStack Platform Oacta, 5.3.0 as packaged in Red Hat OpenStack Newton, where pre-install and security policy scripts used insecure temporary files. A local user could exploit this flaw to conduct a symbolic-link attack, allowing them to overwrite the contents of arbitrary files.

The System Security Services Daemon (SSSD) 1.11.6 does not properly identify group membership when a non-POSIX group is in a group membership chain, which allows local users to bypass access restrictions via unspecified vectors.

Versions of the npm CLI prior to 6.13.3 are vulnerable to an Arbitrary File Write. It fails to prevent access to folders outside of the intended node_modules folder through the bin field. A properly constructed entry in the package.json bin field would allow a package publisher to modify and/or gain access to arbitrary files on a user's system when the package is installed. This behavior is still possible through install scripts. This vulnerability bypasses a user using the --ignore-scripts install option.

An issue was discovered in GNOME file-roller before 3.29.91. It allows a single ./../ path traversal via a filename contained in a TAR archive, possibly overwriting a file during extraction.

The kubectl cp command allows copying files between containers and the user machine. To copy files from a container, Kubernetes runs tar inside the container to create a tar archive, copies it over the network, and kubectl unpacks it on the user’s machine. If the tar binary in the container is malicious, it could run any code and output unexpected, malicious results. An attacker could use this to write files to any path on the user’s machine when kubectl cp is called, limited only by the system permissions of the local user. Kubernetes affected versions include versions prior to 1.13.9, versions prior to 1.14.5, versions prior to 1.15.2, and versions 1.1, 1.2, 1.4, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 1.10, 1.11, 1.12.

It was discovered that libvirtd before versions 4.10.1 and 5.4.1 would permit read-only clients to use the virDomainSaveImageGetXMLDesc() API, specifying an arbitrary path which would be accessed with the permissions of the libvirtd process. An attacker with access to the libvirtd socket could use this to probe the existence of arbitrary files, cause denial of service or cause libvirtd to execute arbitrary programs.

A path traversal flaw was found in spacewalk-proxy, all versions through 2.9, in the way the proxy processes cached client tokens. A remote, unauthenticated attacker could use this flaw to test the existence of arbitrary files, if they have access to the proxy's filesystem, or can execute arbitrary code in the context of the httpd process.

It was found that icedtea-web though 1.7.2 and 1.8.2 did not properly sanitize paths from <jar/> elements in JNLP files. An attacker could trick a victim into running a specially crafted application and use this flaw to upload arbitrary files to arbitrary locations in the context of the user.

The virConnectBaselineHypervisorCPU() and virConnectCompareHypervisorCPU() libvirt APIs, 4.x.x before 4.10.1 and 5.x.x before 5.4.1, accept an "emulator" argument to specify the program providing emulation for a domain. Since v1.2.19, libvirt will execute that program to probe the domain's capabilities. Read-only clients could specify an arbitrary path for this argument, causing libvirtd to execute a crafted executable with its own privileges.

The virConnectGetDomainCapabilities() libvirt API, versions 4.x.x before 4.10.1 and 5.x.x before 5.4.1, accepts an "emulatorbin" argument to specify the program providing emulation for a domain. Since v1.2.19, libvirt will execute that program to probe the domain's capabilities. Read-only clients could specify an arbitrary path for this argument, causing libvirtd to execute a crafted executable with its own privileges.

Versions of the npm CLI prior to 6.13.4 are vulnerable to an Arbitrary File Overwrite. It fails to prevent existing globally-installed binaries to be overwritten by other package installations. For example, if a package was installed globally and created a serve binary, any subsequent installs of packages that also create a serve binary would overwrite the previous serve binary. This behavior is still allowed in local installations and also through install scripts. This vulnerability bypasses a user using the --ignore-scripts install option.

Drools Workbench contains a path traversal vulnerability. The vulnerability allows a remote, authenticated attacker to bypass the directory restrictions and retrieve arbitrary files from the affected host.

RubyGems version 2.6.12 and earlier fails to validate specification names, allowing a maliciously crafted gem to potentially overwrite any file on the filesystem.

keycloak: path traversal via double URL encoding. A flaw was found in Keycloak, where it does not properly validate URLs included in a redirect. An attacker can use this flaw to construct a malicious request to bypass validation and access other URLs and potentially sensitive information within the domain or possibly conduct further attacks. This flaw affects any client that utilizes a wildcard in the Valid Redirect URIs field.

A flaw was found in the fabric8 kubernetes-client in version 4.2.0 and after. This flaw allows a malicious pod/container to cause applications using the fabric8 kubernetes-client `copy` command to extract files outside the working path. The highest threat from this vulnerability is to integrity and system availability. This has been fixed in kubernetes-client-4.13.2 kubernetes-client-5.0.2 kubernetes-client-4.11.2 kubernetes-client-4.7.2

Directory traversal vulnerability in the Dir.mktmpdir method in the tmpdir library in Ruby before 2.2.10, 2.3.x before 2.3.7, 2.4.x before 2.4.4, 2.5.x before 2.5.1, and 2.6.0-preview1 might allow attackers to create arbitrary directories or files via a .. (dot dot) in the prefix argument.

A flaw was found in pesign. The pesign package provides a systemd service used to start the pesign daemon. This service unit runs a script to set ACLs for /etc/pki/pesign and /run/pesign directories to grant access privileges to users in the 'pesign' group. However, the script doesn't check for symbolic links. This could allow an attacker to gain access to privileged files and directories via a path traversal attack.

A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file, leading to information disclosure of important configuration details from the OpenStack deployment.

A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file. This issue leads to information disclosure of important configuration details from the OpenStack deployment.

A vulnerability was found in Podman, Buildah, and CRI-O. A symlink traversal vulnerability in the containers/storage library can cause Podman, Buildah, and CRI-O to hang and result in a denial of service via OOM kill when running a malicious image using an automatically assigned user namespace (`--userns=auto` in Podman and Buildah). The containers/storage library will read /etc/passwd inside the container, but does not properly validate if that file is a symlink, which can be used to cause the library to read an arbitrary file on the host.

A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah.

A flaw was found in the OpenShift Console, an endpoint for plugins to serve resources in multiple languages: /locales/resources.json. This endpoint's lng and ns parameters are used to construct a filepath in pkg/plugins/handlers unsafely.go#L112 Because of this unsafe filepath construction, an authenticated user can manipulate the path to retrieve any JSON files on the console's pod by using sequences of ../ and valid directory paths.

The IBM Java Runtime Environment's Diagnostic Tooling Framework for Java (DTFJ) (IBM SDK, Java Technology Edition 6.0 , 7.0, and 8.0) does not protect against path traversal attacks when extracting compressed dump files. IBM X-Force ID: 144882.

The Gluster file system through version 4.1.4 is vulnerable to abuse of the 'features/index' translator. A remote attacker with access to mount volumes could exploit this via the 'GF_XATTROP_ENTRY_IN_KEY' xattrop to create arbitrary, empty files on the target server.

The Apache Web Server (httpd) specific code that normalised the requested path before matching it to the URI-worker map in Apache Tomcat JK (mod_jk) Connector 1.2.0 to 1.2.44 did not handle some edge cases correctly. If only a sub-set of the URLs supported by Tomcat were exposed via httpd, then it was possible for a specially constructed request to expose application functionality through the reverse proxy that was not intended for clients accessing the application via the reverse proxy. It was also possible in some configurations for a specially constructed request to bypass the access controls configured in httpd. While there is some overlap between this issue and CVE-2018-1323, they are not identical.

redhat-certification does not properly sanitize paths in rhcertStore.py:__saveResultsFile. A remote attacker could use this flaw to overwrite any file, potentially gaining remote code execution.

WildFly Core before version 6.0.0.Alpha3 does not properly validate file paths in .war archives, allowing for the extraction of crafted .war archives to overwrite arbitrary files. This is an instance of the 'Zip Slip' vulnerability.

In Git before 2.13.7, 2.14.x before 2.14.4, 2.15.x before 2.15.2, 2.16.x before 2.16.4, and 2.17.x before 2.17.1, remote code execution can occur. With a crafted .gitmodules file, a malicious project can execute an arbitrary script on a machine that runs "git clone --recurse-submodules" because submodule "names" are obtained from this file, and then appended to $GIT_DIR/modules, leading to directory traversal with "../" in a name. Finally, post-checkout hooks from a submodule are executed, bypassing the intended design in which hooks are not obtained from a remote server.

A malicious SCP server can send unexpected paths that could make the client application override local files outside of working directory. This could be misused to create malicious executable or configuration files and make the user execute them under specific consequences. This is the same issue as in OpenSSH, tracked as CVE-2019-6111.

A directory traversal issue was found in reposync, a part of yum-utils, where reposync fails to sanitize paths in remote repository configuration files. If an attacker controls a repository, they may be able to copy files outside of the destination directory on the targeted system via path traversal. If reposync is running with heightened privileges on a targeted system, this flaw could potentially result in system compromise via the overwriting of critical system files. Version 1.1.31 and older are believed to be affected.

plexus-archiver before 3.6.0 is vulnerable to directory traversal, allowing attackers to write to arbitrary files via a ../ (dot dot slash) in an archive entry that is mishandled during extraction. This vulnerability is also known as 'Zip-Slip'.

A flaw was found in Wildfly 9.x. A path traversal vulnerability through the org.wildfly.extension.undertow.deployment.ServletResourceManager.getResource method could lead to information disclosure of arbitrary local files.

Flatpak is a Linux application sandboxing and distribution framework. A path traversal vulnerability affects versions of Flatpak prior to 1.12.3 and 1.10.6. flatpak-builder applies `finish-args` last in the build. At this point the build directory will have the full access that is specified in the manifest, so running `flatpak build` against it will gain those permissions. Normally this will not be done, so this is not problem. However, if `--mirror-screenshots-url` is specified, then flatpak-builder will launch `flatpak build --nofilesystem=host appstream-utils mirror-screenshots` after finalization, which can lead to issues even with the `--nofilesystem=host` protection. In normal use, the only issue is that these empty directories can be created wherever the user has write permissions. However, a malicious application could replace the `appstream-util` binary and potentially do something more hostile. This has been resolved in Flatpak 1.12.3 and 1.10.6 by changing the behaviour of `--nofilesystem=home` and `--nofilesystem=host`.

A flaw was found in cri-o. A malicious container can create a symbolic link to arbitrary files on the host via directory traversal (“../“). This flaw allows the container to read and write to arbitrary files on the host system.

An issue in the createTempFile method of hornetq v2.4.9 allows attackers to arbitrarily overwrite files or access sensitive information.

Directory traversal vulnerability in Action View in Ruby on Rails before 3.2.22.1, 4.0.x and 4.1.x before 4.1.14.1, 4.2.x before 4.2.5.1, and 5.x before 5.0.0.beta1.1 allows remote attackers to read arbitrary files by leveraging an application's unrestricted use of the render method and providing a .. (dot dot) in a pathname.

Directory traversal vulnerability in the virStorageBackendFileSystemVolCreate function in storage/storage_backend_fs.c in libvirt, when fine-grained Access Control Lists (ACL) are in effect, allows local users with storage_vol:create ACL but not domain:write permission to write to arbitrary files via a .. (dot dot) in a volume name.

Directory traversal vulnerability in Kubernetes, as used in Red Hat OpenShift Enterprise 3.0, allows attackers to write to arbitrary files via a crafted object type name, which is not properly handled before passing it to etcd.