There was a Memory Corruption issue discovered in multiple models of Axis IP Cameras which allows remote attackers to cause a denial of service (crash) by sending a crafted command which will result in a code path that calls the UND undefined ARM instruction.
An issue was discovered in the httpd process in multiple models of Axis IP Cameras. There is Memory Corruption.
An issue was discovered on AXIS M1033-W (IP camera) Firmware version 5.40.5.1 devices. They don't employ a suitable mechanism to prevent a DoS attack, which leads to a response time delay. An attacker can use the hping3 tool to perform an IPv4 flood attack, and the services are interrupted from attack start to end.
Multiple implementations of the DNS protocol, including (1) Poslib 1.0.2-1 and earlier as used by Posadis, (2) Axis Network products before firmware 3.13, and (3) Men & Mice Suite 2.2x before 2.2.3 and 3.5.x before 3.5.2, allow remote attackers to cause a denial of service (CPU and network bandwidth consumption) by triggering a communications loop via (a) DNS query packets with localhost as a spoofed source address, or (b) a response packet that triggers a response packet.
Heap-based buffer overflow in the CamImage.CamImage.1 ActiveX control in AxisCamControl.ocx in AXIS Camera Control 2.40.0.0 allows remote attackers to execute arbitrary code via a long image_pan_tilt property value.
An issue has been found in Bento4 1.5.1-624. It is a SEGV in AP4_StszAtom::GetSampleSize in Core/Ap4StszAtom.cpp.
main/http.c in the HTTP server in Asterisk Open Source 1.8.x before 1.8.20.2, 10.x before 10.12.2, and 11.x before 11.2.2; Certified Asterisk 1.8.15 before 1.8.15-cert2; and Asterisk Digiumphones 10.x-digiumphones before 10.12.2-digiumphones does not properly restrict Content-Length values, which allows remote attackers to conduct stack-consumption attacks and cause a denial of service (daemon crash) via a crafted HTTP POST request. NOTE: this vulnerability exists because of an incorrect fix for CVE-2012-5976.
An issue was discovered in libpbc.a in cloudwu PBC through 2017-03-02. A SEGV can occur in set_field_one in bootstrap.c while making a query.
An untrusted pointer dereference in mrb_vm_exec() of mruby v3.0.0 can lead to a segmentation fault or application crash.
An issue was discovered in libpbc.a in cloudwu PBC through 2017-03-02. A SEGV can occur in pbc_pattern_set_default in pattern.c.
An issue was discovered in libpbc.a in cloudwu PBC through 2017-03-02. A SEGV can occur in pbc_rmessage_message in rmessage.c.
Buffer overflow in mIRC 6.1 and 6.11 allows remote attackers to cause a denial of service (crash) via a long DCC SEND request.
An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A buffer overflow vulnerability exists in the router's web server (httpd). When processing the page parameters for a post request, the value is directly written with sprintf to a local variable placed on the stack, which overrides the return address of the function, a causing buffer overflow.
Multiple GameSpy 3D 2.62 compatible gaming servers generate very large UDP responses to small requests, which allows remote attackers to use the servers as an amplifier in DDoS attacks with spoofed UDP query packets, as demonstrated using Battlefield 1942.
An issue was discovered in libpbc.a in cloudwu PBC through 2017-03-02. A SEGV can occur in set_field_one in bootstrap.c during a memcpy.
Buffer overflow in 3D-FTP client 4.0 allows remote FTP servers to cause a denial of service (crash) and possibly execute arbitrary code via a long banner.
Multiple buffer overflows in NWFTPD.nlm in the FTP server in Novell NetWare 6.0 before SP4 and 6.5 before SP1 allow remote attackers to cause a denial of service (abend) via a long (1) username or (2) password.
An issue has been discovered in Bento4 1.5.1-624. A SEGV can occur in AP4_Processor::ProcessFragments in Core/Ap4Processor.cpp.
Rockwell Automation RSLinx Classic Versions 4.00.01 and prior. This vulnerability may allow a remote, unauthenticated threat actor to intentionally send a malformed CIP packet to Port 44818, causing the RSLinx Classic application to terminate. The user will need to manually restart the software to regain functionality.
Buffer overflow in httpd.c of fnord 1.6 allows remote attackers to create a denial of service (crash) and possibly execute arbitrary code via a long CGI request passed to the do_cgi function.
An issue was discovered in libpbc.a in cloudwu PBC through 2017-03-02. A SEGV can occur in pbc_pattern_pack in pattern.c.
Heap buffer overflow issues were found in Opensc before version 0.22.0 in pkcs15-oberthur.c that could potentially crash programs using the library.
Stack buffer overflow issues were found in Opensc before version 0.22.0 in various places that could potentially crash programs using the library.
ImportedSymbols in debug/macho (for Open or OpenFat) in Go before 1.16.10 and 1.17.x before 1.17.3 Accesses a Memory Location After the End of a Buffer, aka an out-of-bounds slice situation.
The dissect_ber_choice function in epan/dissectors/packet-ber.c in the ASN.1 BER dissector in Wireshark 1.6.x before 1.6.15 and 1.8.x before 1.8.7 does not properly initialize a certain variable, which allows remote attackers to cause a denial of service (application crash) via a malformed packet.
A buffer overflow vulnerability in Fortinet FortiOS 6.0.0 through 6.0.4, 5.6.0 through 5.6.7, 5.4 and earlier versions and FortiProxy 2.0.0, 1.2.8 and earlier versions under SSL VPN web portal allows a non-authenticated attacker to perform a Denial-of-service attack via special craft message payloads.
A vulnerability has been identified in SIMATIC S7-400 CPU 412-1 DP V7 (All versions), SIMATIC S7-400 CPU 412-2 DP V7 (All versions), SIMATIC S7-400 CPU 412-2 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 414-2 DP V7 (All versions), SIMATIC S7-400 CPU 414-3 DP V7 (All versions), SIMATIC S7-400 CPU 414-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 414F-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 416-2 DP V7 (All versions), SIMATIC S7-400 CPU 416-3 DP V7 (All versions), SIMATIC S7-400 CPU 416-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 416F-2 DP V7 (All versions), SIMATIC S7-400 CPU 416F-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 417-4 DP V7 (All versions), SIMATIC S7-400 H V6 CPU family (incl. SIPLUS variants) (All versions < V6.0.10), SIMATIC S7-410 V10 CPU family (incl. SIPLUS variants) (All versions < V10.1), SIMATIC S7-410 V8 CPU family (incl. SIPLUS variants) (All versions < V8.2.3), SIPLUS S7-400 CPU 414-3 PN/DP V7 (All versions < V7.0.3), SIPLUS S7-400 CPU 416-3 PN/DP V7 (All versions < V7.0.3), SIPLUS S7-400 CPU 416-3 V7 (All versions), SIPLUS S7-400 CPU 417-4 V7 (All versions). Affected devices improperly handle specially crafted packets sent to port 102/tcp. This could allow an attacker to create a Denial-of-Service condition. A restart is needed to restore normal operations.
There is Memory corruption in the web interface Moxa OnCell G3100-HSPA Series version 1.6 Build 17100315 and prior, different vulnerability than CVE-2018-11420.
In Wireshark 2.6.0, the IEEE 802.11 protocol dissector could crash. This was addressed in epan/crypt/dot11decrypt.c by avoiding a buffer overflow during FTE processing in Dot11DecryptTDLSDeriveKey.
In Wireshark 2.6.0, the RTCP dissector could crash. This was addressed in epan/dissectors/packet-rtcp.c by avoiding a buffer overflow for packet status chunks.
In Dell EMC NetWorker versions prior to 9.2.1.1, versions prior to 9.1.1.6, 9.0.x, and versions prior to 8.2.4.11, the 'nsrd' daemon causes a buffer overflow condition when handling certain messages. A remote unauthenticated attacker could potentially exploit this vulnerability to cause a denial of service to the users of NetWorker systems.
Dell EMC ScaleIO, versions prior to 2.5, do not properly handle some packet data in the MDM service. As a result, a remote attacker could potentially send specifically crafted packet data to the MDM service causing it to crash.
procps-ng before version 3.3.15 is vulnerable to a denial of service in ps via mmap buffer overflow. Inbuilt protection in ps maps a guard page at the end of the overflowed buffer, ensuring that the impact of this flaw is limited to a crash (temporary denial of service).
An issue was discovered in GEGL through 0.3.32. The process function in operations/external/ppm-load.c has unbounded memory allocation, leading to a denial of service (application crash) upon allocation failure.
MailEnable 1.5 015 through 1.5 018 allows remote attackers to cause a denial of service (crash) via a long USER string, possibly due to a buffer overflow.
389-ds-base before versions 1.4.0.9, 1.3.8.1, 1.3.6.15 did not properly handle long search filters with characters needing escapes, possibly leading to buffer overflows. A remote, unauthenticated attacker could potentially use this flaw to make ns-slapd crash via a specially crafted LDAP request, thus resulting in denial of service.
An issue was discovered in HAProxy before 1.8.8. The incoming H2 frame length was checked against the max_frame_size setting instead of being checked against the bufsize. The max_frame_size only applies to outgoing traffic and not to incoming, so if a large enough frame size is advertised in the SETTINGS frame, a wrapped frame will be defragmented into a temporary allocated buffer where the second fragment may overflow the heap by up to 16 kB. It is very unlikely that this can be exploited for code execution given that buffers are very short lived and their addresses not realistically predictable in production, but the likelihood of an immediate crash is absolutely certain.
An exploitable memory corruption vulnerability exists in the Name Service Client functionality of 3S-Smart Software Solutions CODESYS GatewayService. A specially crafted packet can cause a large memcpy, resulting in an access violation and termination of the process. An attacker can send a packet to a device running the GatewayService.exe to trigger this vulnerability. All variants of the CODESYS V3 products in all versions prior V3.5.16.10 containing the CmpRouter or CmpRouterEmbedded component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PLCnext, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control RTE V3, CODESYS Control RTE V3 (for Beckhoff CX), CODESYS Control Win V3 (also part of the CODESYS Development System setup), CODESYS Control V3 Runtime System Toolkit, CODESYS V3 Embedded Target Visu Toolkit, CODESYS V3 Remote Target Visu Toolkit, CODESYS V3 Safety SIL2, CODESYS Edge Gateway V3, CODESYS Gateway V3, CODESYS HMI V3, CODESYS OPC Server V3, CODESYS PLCHandler SDK, CODESYS V3 Simulation Runtime (part of the CODESYS Development System).
The OSIsoft PI Interface for IEEE C37.118 before 1.0.6.158 allows remote attackers to cause a denial of service (instance shutdown and data-collection outage) via crafted C37.118 configuration packets that trigger an invalid read operation.
A vulnerability has been identified in EN100 Ethernet module DNP3 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.37), EN100 Ethernet module IEC104 variant (All versions), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). An unauthorized user could exploit a buffer overflow vulnerability in the webserver. Specially crafted packets sent could cause a Denial-of-Service condition and if certain conditions are met, the affected devices must be restarted manually to fully recover. At the time of advisory publication no public exploitation of this security vulnerability was known.
A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799.
In Irssi before 1.0.3, when receiving certain incorrectly quoted DCC files, it tries to find the terminating quote one byte before the allocated memory. Thus, remote attackers might be able to cause a crash.
Schneider Electric's ClearSCADA versions released prior to August 2017 are susceptible to a memory allocation vulnerability, whereby malformed requests can be sent to ClearSCADA client applications to cause unexpected behavior. Client applications affected include ViewX and the Server Icon.
A vulnerability in the FTP inspection engine of Cisco Adaptive Security (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of FTP data. An attacker could exploit this vulnerability by sending malicious FTP traffic through an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
The ReverbConvolverStage::ReverbConvolverStage function in core/platform/audio/ReverbConvolverStage.cpp in the Web Audio implementation in Blink, as used in Google Chrome before 30.0.1599.66, allows remote attackers to cause a denial of service (out-of-bounds read) via vectors related to the impulseResponse array.
Buffer overflow in KDSMAIN in the Basic Services component in IBM Tivoli Monitoring (ITM) 6.2.0 through FP3, 6.2.1 through FP4, 6.2.2 through FP9, and 6.2.3 before FP3, as used in IBM Application Manager for Smart Business (formerly Tivoli Foundations Application Manager) 1.2.1 before 1.2.1.0-TIV-IAMSB-FP0004 and other products, allows remote attackers to cause a denial of service (segmentation fault) via a crafted http URL.
There is a heap-based buffer overflow in the function hpel_motion in mpegvideo_motion.c in libav 12.1. A crafted input can lead to a remote denial of service attack.
In curl before 7.54.1 on Windows and DOS, libcurl's default protocol function, which is the logic that allows an application to set which protocol libcurl should attempt to use when given a URL without a scheme part, had a flaw that could lead to it overwriting a heap based memory buffer with seven bytes. If the default protocol is specified to be FILE or a file: URL lacks two slashes, the given "URL" starts with a drive letter, and libcurl is built for Windows or DOS, then libcurl would copy the path 7 bytes off, so that the end of the given path would write beyond the malloc buffer (7 bytes being the length in bytes of the ascii string "file://").
A vulnerability in the forwarding information base (FIB) code of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause inconsistency between the routing information base (RIB) and the FIB, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of extremely long routing updates. An attacker could exploit this vulnerability by sending a large routing update. A successful exploit could allow the attacker to trigger inconsistency between the FIB and the RIB, resulting in a DoS condition. Cisco Bug IDs: CSCus84718.
In OPC Foundation Local Discovery Server (LDS) before 1.04.402.463, remote attackers can cause a denial of service (DoS) by sending carefully crafted messages that lead to Access of a Memory Location After the End of a Buffer.