The rsync daemon in F5 BIG-IP 11.6 before 11.6.0, 11.5.1 before HF3, 11.5.0 before HF4, 11.4.1 before HF4, 11.4.0 before HF7, 11.3.0 before HF9, and 11.2.1 before HF11 and Enterprise Manager 3.x before 3.1.1 HF2, when configured in failover mode, does not require authentication, which allows remote attackers to read or write to arbitrary files via a cmi request to the ConfigSync IP address.

BMC Remedy AR System before 9.1 SP3, when Remedy AR Authentication is enabled, allows attackers to obtain administrative access.

The Festo CECX-X-C1 Modular Master Controller with CoDeSys and CECX-X-M1 Modular Controller with CoDeSys and SoftMotion provide an undocumented access method involving the FTP protocol, which could allow a remote attacker to execute arbitrary code or cause a denial of service (application crash) via unspecified vectors.

Candlepin in Red Hat Subscription Asset Manager 1.0 through 1.3 uses a weak authentication scheme when the configuration file does not specify a scheme, which has unspecified impact and attack vectors.

ajax.cgi in the web interface on the Choice Wireless Green Packet WIXFMR-111 4G WiMax modem allows remote attackers to execute arbitrary commands via shell metacharacters in the pip parameter in an Ajax tag_ipPing request, a different vulnerability than CVE-2013-3581.

D-Link DIR-505L SharePort Mobile Companion 1.01 and DIR-826L Wireless N600 Cloud Router 1.02 allows remote attackers to bypass authentication via a direct request when an authorized session is active.

Belkin N900 router (F9K1104v1) contains an Authentication Bypass using "Javascript debugging".

The EAP-FAST authentication module in Cisco Secure Access Control Server (ACS) 4.x before 4.2.1.15.11, when a RADIUS server configuration is enabled, does not properly parse user identities, which allows remote attackers to execute arbitrary commands via crafted EAP-FAST packets, aka Bug ID CSCui57636.

EMC Smarts Network Configuration Manager (NCM) before 9.2 does not require authentication for all Java RMI method calls, which allows remote attackers to execute arbitrary code via unspecified vectors.

The SSH USERAUTH CHANGE REQUEST feature in SSH Tectia Server 6.0.4 through 6.0.20, 6.1.0 through 6.1.12, 6.2.0 through 6.2.5, and 6.3.0 through 6.3.2 on UNIX and Linux, when old-style password authentication is enabled, allows remote attackers to bypass authentication via a crafted session involving entry of blank passwords, as demonstrated by a root login session from a modified OpenSSH client with an added input_userauth_passwd_changereq call in sshconnect2.c.

The Web server password authentication mechanism used by the products is vulnerable to a MitM and Replay attack. Successful exploitation of this vulnerability will allow unauthorized access of the product’s Web server to view and alter product configuration and diagnostics information. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

The default configuration of EMC Smarts Network Configuration Manager (NCM) before 9.1 does not require authentication for database access, which allows remote attackers to have an unspecified impact via a network session.

Open&Compact FTP Server (Open-FTPD) 1.2 and earlier allows remote attackers to bypass authentication by sending (1) LIST, (2) RETR, (3) STOR, or other commands without performing the required login steps first.

Unknown vulnerability in Cisco Catalyst 7.5(1) allows local users to bypass authentication and gain access to the enable mode without a password.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

The implementations of EAP-PWD in hostapd EAP Server and wpa_supplicant EAP Peer do not validate the scalar and element values in EAP-pwd-Commit. This vulnerability may allow an attacker to complete EAP-PWD authentication without knowing the password. However, unless the crypto library does not implement additional checks for the EC point, the attacker will not be able to derive the session key or complete the key exchange. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

An improper authentication vulnerability can be exploited through a race condition that occurs in Ellucian Banner Web Tailor 8.8.3, 8.8.4, and 8.9 and Banner Enterprise Identity Services 8.3, 8.3.1, 8.3.2, and 8.4, in conjunction with SSO Manager. This vulnerability allows remote attackers to steal a victim's session (and cause a denial of service) by repeatedly requesting the initial Banner Web Tailor main page with the IDMSESSID cookie set to the victim's UDCID, which in the case tested is the institutional ID. During a login attempt by a victim, the attacker can leverage the race condition and will be issued the SESSID that was meant for this victim.

A vulnerability was found in mod_auth_mellon before v0.14.2. If Apache is configured as a reverse proxy and mod_auth_mellon is configured to only let through authenticated users (with the require valid-user directive), adding special HTTP headers that are normally used to start the special SAML ECP (non-browser based) can be used to bypass authentication.

In resetPasswordInternal of DevicePolicyManagerService.java, there is a possible bypass of password reset protection due to an unusual root cause. Remote user interaction is needed for exploitation.Product: AndroidVersions: Android-8.1 Android-9Android ID: A-110172241

Splunk 4.2.5 and earlier, when a Free license is selected, enables potentially undesirable functionality within an environment that intentionally does not support authentication, which allows remote attackers to (1) read arbitrary files via a management-console session that leverages the ability to create crafted data sources, or (2) execute management commands via an HTTP request.

The HMI web server in Siemens WinCC flexible 2004, 2005, 2007, and 2008 before SP3; WinCC V11 (aka TIA portal) before SP2 Update 1; the TP, OP, MP, Comfort Panels, and Mobile Panels SIMATIC HMI panels; WinCC V11 Runtime Advanced; and WinCC flexible Runtime generates predictable authentication tokens for cookies, which makes it easier for remote attackers to bypass authentication via a crafted cookie.

Incorrect Access Control in the Account Access / Password Reset Link in SimplyBook.me Enterprise before 2019-04-23 allows Unauthorized Attackers to READ/WRITE Customer or Administrator data via a persistent HTTP GET Request Hash Link Replay, as demonstrated by a login-link from the browser history.

The time-based one-time-password (TOTP) function in the application logic of the Green Electronics RainMachine Mini-8 (2nd generation) uses the administrator's password hash to generate a 6-digit temporary passcode that can be used for remote and local access, aka a "Use of Password Hash Instead of Password for Authentication" issue. This is exploitable by an attacker who discovers a hash value in the rainmachine-settings.sqlite file.

Due to the lack of firmware authentication in the upgrade process of T&W WIFI Repeater BE126 devices, an attacker can craft a malicious firmware and use it as an update.

The Embedthis HTTP library, and Appweb versions before 7.0.3, have a logic flaw related to the authCondition function in http/httpLib.c. With a forged HTTP request, it is possible to bypass authentication for the form and digest login types.

Imperva SecureSphere gateway (GW) running v13, for both pre-First Time Login or post-First Time Login (FTL), if the attacker knows the basic authentication passwords, the GW may be vulnerable to RCE through specially crafted requests, from the web access management interface.

Multiple Lenze products of the cabinet series skip the password verification upon second login. After a user has been logged on to the device once, a remote attacker can get full access without knowledge of the password.

An issue was discovered in Rockwell Automation Allen-Bradley PowerMonitor 1000. An unauthenticated user can add/edit/remove administrators because access control is implemented on the client side via a disabled attribute for a BUTTON element.

Discuz! DiscuzX 3.4, when WeChat login is enabled, allows remote attackers to bypass authentication by leveraging a non-empty #wechat#common_member_wechatmp to gain login access to an account via a plugin.php ac=wxregister request (the attacker does not have control over which account will be accessed).

Session fixation vulnerability in Mambo 4.6.2 CMS allows remote attackers to hijack web sessions by setting the Cookie parameter.

BigTree 4.2.23 on Windows, when Advanced or Simple Rewrite routing is enabled, allows remote attackers to bypass authentication via a ..\ substring, as demonstrated by a launch.php?bigtree_htaccess_url=admin/images/..\ URI.

IBM LoopBack (IBM API Connect 2018.1, 2018.4.1, 5.0.8.0, and 5.0.8.4) could allow an attacker to bypass authentication if the AccessToken Model is exposed over a REST API, it is then possible for anyone to create an AccessToken for any User provided they know the userId and can hence get access to the other user’s data / access to their privileges (if the user happens to be an Admin for example). IBM X-Force ID: 148801.

A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to bypass authentication controls and log in to the device through the management interface This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and log in to the device as an administrator. The attacker could obtain privileges that are the same level as an administrative user but it depends on the crafted credentials. Note: This vulnerability exists because of a non-default device configuration that must be present for it to be exploitable. For details about the vulnerable configuration, see the Vulnerable Products section of this advisory.

IBM API Connect 5.0.0.0-5.0.8.3 Developer Portal does not enforce Two Factor Authentication (TFA) while resetting a user password but enforces it for all other login scenarios. IBM X-Force ID: 144483.

An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. The process of registering a device with a cloud account was based on an activation code derived from the device MAC address. By guessing valid MAC addresses or using MAC addresses printed on devices in shops and reverse engineering the protocol, an attacker would have been able to register previously unregistered devices to their account. When the rightful owner would have connected them after purchase to their WiFi network, the devices would not have registered with their account, would subsequently not have been controllable from the owner's mobile app, and would not have been visible in the owner's account. Instead, they would have been under control of the attacker.

The SAML broker consumer endpoint in Keycloak before version 4.6.0.Final ignores expiration conditions on SAML assertions. An attacker can exploit this vulnerability to perform a replay attack.

A vulnerability has been identified in SIMATIC IT LMS (All versions), SIMATIC IT Production Suite (Versions V7.1 < V7.1 Upd3), SIMATIC IT UA Discrete Manufacturing (Versions < V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.4). An attacker with network access to the installation could bypass the application-level authentication. In order to exploit the vulnerability, an attacker must obtain network access to an affected installation and must obtain a valid username to the system. Successful exploitation requires no user privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this vulnerability was known.

In Apache Karaf version prior to 3.0.9, 4.0.9, 4.1.1, when the webconsole feature is installed in Karaf, it is available at .../system/console and requires authentication to access it. One part of the console is a Gogo shell/console that gives access to the command line console of Karaf via a Web browser, and when navigated to it is available at .../system/console/gogo. Trying to go directly to that URL does require authentication. And optional bundle that some applications use is the Pax Web Extender Whiteboard, it is part of the pax-war feature and perhaps others. When it is installed, the Gogo console becomes available at another URL .../gogo/, and that URL is not secured giving access to the Karaf console to unauthenticated users. A mitigation for the issue is to manually stop/uninstall Gogo plugin bundle that is installed with the webconsole feature, although of course this removes the console from the .../system/console application, not only from the unauthenticated endpoint. One could also stop/uninstall the Pax Web Extender Whiteboard, but other components/applications may require it and so their functionality would be reduced/compromised.

When Eclipse Mosquitto version 1.0 to 1.5.5 (inclusive) is configured to use a password file for authentication, any malformed data in the password file will be treated as valid. This typically means that the malformed data becomes a username and no password. If this occurs, clients can circumvent authentication and get access to the broker by using the malformed username. In particular, a blank line will be treated as a valid empty username. Other security measures are unaffected. Users who have only used the mosquitto_passwd utility to create and modify their password files are unaffected by this vulnerability.

A flaw was found in Moodle 3.4 to 3.4.1, and 3.3 to 3.3.4. If a user account using OAuth2 authentication method was once confirmed but later suspended, the user could still login to the site.

D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext.

If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. This issue is not exploitable on platforms where Junos release is based on FreeBSD 10+. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S9, 16.1R4-S9, 16.1R5-S4, 16.1R6-S4, 16.1R7; 16.2 versions prior to 16.2R2-S5; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D110, 17.2X75-D91; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.2X75 versions prior to 18.2X75-D5.

An issue was discovered in SMA Solar Technology products. The SMAdata2+ communication protocol does not properly use authentication with encryption: it is vulnerable to man in the middle, packet injection, and replay attacks. Any setting change, authentication packet, scouting packet, etc. can be replayed, injected, or used for a man in the middle session. All functionalities available in Sunny Explorer can effectively be done from anywhere within the network as long as an attacker gets the packet setup correctly. This includes the authentication process for all (including hidden) access levels and the changing of settings in accordance with the gained access rights. Furthermore, because the SMAdata2+ communication channel is unencrypted, an attacker capable of understanding the protocol can eavesdrop on communications. NOTE: the vendor's position is that authentication with encryption is not required on an isolated subnetwork. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

The web interface on Dahua DHI-HCVR7216A-S3 devices with NVR Firmware 3.210.0001.10 2016-06-06, Camera Firmware 2.400.0000.28.R 2016-03-29, and SmartPSS Software 1.16.1 2017-01-19 allows remote attackers to obtain login access by leveraging knowledge of the MD5 Admin Hash without knowledge of the corresponding password, a different vulnerability than CVE-2013-6117.

Session hijack vulnerability in httpd on ASUS RT-N56U, RT-N66U, RT-AC66U, RT-N66R, RT-AC66R, RT-AC68U, RT-AC68R, RT-N66W, RT-AC66W, RT-AC87R, RT-AC87U, RT-AC51U, RT-AC68P, RT-N11P, RT-N12+, RT-N12E B1, RT-AC3200, RT-AC53U, RT-AC1750, RT-AC1900P, RT-N300, and RT-AC750 routers with firmware before 3.0.0.4.380.7378; RT-AC68W routers with firmware before 3.0.0.4.380.7266; and RT-N600, RT-N12+ B1, RT-N11P B1, RT-N12VP B1, RT-N12E C1, RT-N300 B1, and RT-N12+ Pro routers with firmware before 3.0.0.4.380.9488; and Asuswrt-Merlin firmware before 380.65_2 allows remote attackers to steal any active admin session by sending cgi_logout and asusrouter-Windows-IFTTT-1.0 in certain HTTP headers.

An Improper Authentication issue was discovered in Siemens SIMATIC CP 44x-1 RNA, all versions prior to 1.4.1. An unauthenticated remote attacker may be able to perform administrative actions on the Communication Process (CP) of the RNA series module, if network access to Port 102/TCP is available and the configuration file for the CP is stored on the RNA's CPU.

An issue was discovered in ABOOT in OnePlus 3 and 3T OxygenOS before 4.0.2. The attacker can reboot the device into the fastboot mode, which could be done without any authentication. A physical attacker can press the "Volume Up" button during device boot, where an attacker with ADB access can issue the adb reboot bootloader command. Then, the attacker can put the platform's SELinux in permissive mode, which severely weakens it, by issuing: fastboot oem selinux permissive.

An exploitable vulnerability exists in the generation of authentication token functionality of Circle with Disney. Specially crafted network packets can cause a valid authentication token to be returned to the attacker resulting in authentication bypass. An attacker can send a series of packets to trigger this vulnerability.

Networking OS10, versions prior to October 2021 with Smart Fabric Services enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.

An insufficient authentication vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow a malicious, network based, unauthenticated attacker to perform privileged actions to gain complete control over the environment.